lkml.org 
[lkml]   [2021]   [Jul]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH AUTOSEL 5.10 31/93] scsi: core: Fixup calling convention for scsi_mode_sense()
Date
From: Hannes Reinecke <hare@suse.de>

[ Upstream commit 8793613de913e03e7c884f4cc56e350bc716431e ]

The description for scsi_mode_sense() claims to return the number of valid
bytes on success, which is not what the code does. Additionally there is
no gain in returning the SCSI status, as everything the callers do is to
check against scsi_result_is_good(), which is what scsi_mode_sense() does
already. So change the calling convention to return a standard error code
on failure, and 0 on success, and adapt the description and all callers.

Link: https://lore.kernel.org/r/20210427083046.31620-4-hare@suse.de
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/scsi/scsi_lib.c | 10 ++++++----
drivers/scsi/scsi_transport_sas.c | 9 ++++-----
drivers/scsi/sd.c | 12 ++++++------
drivers/scsi/sr.c | 2 +-
4 files changed, 17 insertions(+), 16 deletions(-)

diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c
index 31d7a6ddc9db..c639d30ade68 100644
--- a/drivers/scsi/scsi_lib.c
+++ b/drivers/scsi/scsi_lib.c
@@ -2071,9 +2071,7 @@ EXPORT_SYMBOL_GPL(scsi_mode_select);
* @sshdr: place to put sense data (or NULL if no sense to be collected).
* must be SCSI_SENSE_BUFFERSIZE big.
*
- * Returns zero if unsuccessful, or the header offset (either 4
- * or 8 depending on whether a six or ten byte command was
- * issued) if successful.
+ * Returns zero if successful, or a negative error number on failure
*/
int
scsi_mode_sense(struct scsi_device *sdev, int dbd, int modepage,
@@ -2120,6 +2118,8 @@ scsi_mode_sense(struct scsi_device *sdev, int dbd, int modepage,

result = scsi_execute_req(sdev, cmd, DMA_FROM_DEVICE, buffer, len,
sshdr, timeout, retries, NULL);
+ if (result < 0)
+ return result;

/* This code looks awful: what it's doing is making sure an
* ILLEGAL REQUEST sense return identifies the actual command
@@ -2164,13 +2164,15 @@ scsi_mode_sense(struct scsi_device *sdev, int dbd, int modepage,
data->block_descriptor_length = buffer[3];
}
data->header_length = header_length;
+ result = 0;
} else if ((status_byte(result) == CHECK_CONDITION) &&
scsi_sense_valid(sshdr) &&
sshdr->sense_key == UNIT_ATTENTION && retry_count) {
retry_count--;
goto retry;
}
-
+ if (result > 0)
+ result = -EIO;
return result;
}
EXPORT_SYMBOL(scsi_mode_sense);
diff --git a/drivers/scsi/scsi_transport_sas.c b/drivers/scsi/scsi_transport_sas.c
index c9abed8429c9..4a96fb05731d 100644
--- a/drivers/scsi/scsi_transport_sas.c
+++ b/drivers/scsi/scsi_transport_sas.c
@@ -1229,16 +1229,15 @@ int sas_read_port_mode_page(struct scsi_device *sdev)
char *buffer = kzalloc(BUF_SIZE, GFP_KERNEL), *msdata;
struct sas_end_device *rdev = sas_sdev_to_rdev(sdev);
struct scsi_mode_data mode_data;
- int res, error;
+ int error;

if (!buffer)
return -ENOMEM;

- res = scsi_mode_sense(sdev, 1, 0x19, buffer, BUF_SIZE, 30*HZ, 3,
- &mode_data, NULL);
+ error = scsi_mode_sense(sdev, 1, 0x19, buffer, BUF_SIZE, 30*HZ, 3,
+ &mode_data, NULL);

- error = -EINVAL;
- if (!scsi_status_is_good(res))
+ if (error)
goto out;

msdata = buffer + mode_data.header_length +
diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c
index 01f87bcab3dd..f0c0935d7909 100644
--- a/drivers/scsi/sd.c
+++ b/drivers/scsi/sd.c
@@ -2687,18 +2687,18 @@ sd_read_write_protect_flag(struct scsi_disk *sdkp, unsigned char *buffer)
* 5: Illegal Request, Sense Code 24: Invalid field in
* CDB.
*/
- if (!scsi_status_is_good(res))
+ if (res < 0)
res = sd_do_mode_sense(sdkp, 0, 0, buffer, 4, &data, NULL);

/*
* Third attempt: ask 255 bytes, as we did earlier.
*/
- if (!scsi_status_is_good(res))
+ if (res < 0)
res = sd_do_mode_sense(sdkp, 0, 0x3F, buffer, 255,
&data, NULL);
}

- if (!scsi_status_is_good(res)) {
+ if (res < 0) {
sd_first_printk(KERN_WARNING, sdkp,
"Test WP failed, assume Write Enabled\n");
} else {
@@ -2759,7 +2759,7 @@ sd_read_cache_type(struct scsi_disk *sdkp, unsigned char *buffer)
res = sd_do_mode_sense(sdkp, dbd, modepage, buffer, first_len,
&data, &sshdr);

- if (!scsi_status_is_good(res))
+ if (res < 0)
goto bad_sense;

if (!data.header_length) {
@@ -2791,7 +2791,7 @@ sd_read_cache_type(struct scsi_disk *sdkp, unsigned char *buffer)
res = sd_do_mode_sense(sdkp, dbd, modepage, buffer, len,
&data, &sshdr);

- if (scsi_status_is_good(res)) {
+ if (!res) {
int offset = data.header_length + data.block_descriptor_length;

while (offset < len) {
@@ -2909,7 +2909,7 @@ static void sd_read_app_tag_own(struct scsi_disk *sdkp, unsigned char *buffer)
res = scsi_mode_sense(sdp, 1, 0x0a, buffer, 36, SD_TIMEOUT,
sdkp->max_retries, &data, &sshdr);

- if (!scsi_status_is_good(res) || !data.header_length ||
+ if (res < 0 || !data.header_length ||
data.length < 6) {
sd_first_printk(KERN_WARNING, sdkp,
"getting Control mode page failed, assume no ATO\n");
diff --git a/drivers/scsi/sr.c b/drivers/scsi/sr.c
index 77961f058367..726b7048a767 100644
--- a/drivers/scsi/sr.c
+++ b/drivers/scsi/sr.c
@@ -930,7 +930,7 @@ static void get_capabilities(struct scsi_cd *cd)
rc = scsi_mode_sense(cd->device, 0, 0x2a, buffer, ms_len,
SR_TIMEOUT, 3, &data, NULL);

- if (!scsi_status_is_good(rc) || data.length > ms_len ||
+ if (rc < 0 || data.length > ms_len ||
data.header_length + data.block_descriptor_length > data.length) {
/* failed, drive doesn't have capabilities mode page */
cd->cdi.speed = 1;
--
2.30.2
\
 
 \ /
  Last update: 2021-07-10 04:40    [W:0.212 / U:0.500 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site