lkml.org 
[lkml]   [2021]   [Jul]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[Patch v3 4/6] arm64: boot: dts: qcom: sdm45: Add support for LMh node
Date
Add LMh nodes for cpu cluster0 and cpu cluster1. Also add interrupt
support in cpufreq node to capture the LMh interrupt and let the scheduler
know of the max frequency throttling.

Signed-off-by: Thara Gopinath <thara.gopinath@linaro.org>
---

v2->v3:
- Changed the LMh low and high trip to 94500 and 95000 mC from
74500 and 75000 mC. This was a bug that got introduced in v2.
v1->v2:
- Dropped dt property qcom,support-lmh as per Bjorn's review comments.
- Changed lmh compatible from generic to platform specific.
- Introduced properties specifying arm, low and high temp thresholds for LMh
as per Daniel's suggestion.

arch/arm64/boot/dts/qcom/sdm845.dtsi | 26 ++++++++++++++++++++++++++
1 file changed, 26 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi
index 0a86fe71a66d..4da6b8f3dd7b 100644
--- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
@@ -3646,6 +3646,30 @@ swm: swm@c85 {
};
};

+ lmh_cluster1: lmh@17d70800 {
+ compatible = "qcom,sdm845-lmh";
+ reg = <0 0x17d70800 0 0x401>;
+ interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+ qcom,lmh-cpu-id = <0x4>;
+ qcom,lmh-temperature-arm = <65000>;
+ qcom,lmh-temperature-low = <94500>;
+ qcom,lmh-temperature-high = <95000>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+
+ lmh_cluster0: lmh@17d78800 {
+ compatible = "qcom,sdm845-lmh";
+ reg = <0 0x17d78800 0 0x401>;
+ interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+ qcom,lmh-cpu-id = <0x0>;
+ qcom,lmh-temperature-arm = <65000>;
+ qcom,lmh-temperature-low = <94500>;
+ qcom,lmh-temperature-high = <95000>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+
sound: sound {
};

@@ -4911,6 +4935,8 @@ cpufreq_hw: cpufreq@17d43000 {
reg = <0 0x17d43000 0 0x1400>, <0 0x17d45800 0 0x1400>;
reg-names = "freq-domain0", "freq-domain1";

+ interrupts-extended = <&lmh_cluster0 0>, <&lmh_cluster1 0>;
+
clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GPLL0>;
clock-names = "xo", "alternate";

--
2.25.1
\
 
 \ /
  Last update: 2021-07-08 14:09    [W:0.163 / U:0.332 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site