lkml.org 
[lkml]   [2021]   [Jul]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2] iio: adis: set GPIO reset pin direction
Date
Set reset pin direction to output as the reset pin needs to be an active
low output pin.

Co-developed-by: Hannu Hartikainen <hannu@hrtk.in>
Signed-off-by: Hannu Hartikainen <hannu@hrtk.in>
Signed-off-by: Antti Keränen <detegr@rbx.email>
---
Removed unnecessary toggling of the pin as requested by Lars-Peter. I
missed out on the conversation, but I agree this is better.

drivers/iio/imu/adis.c | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/drivers/iio/imu/adis.c b/drivers/iio/imu/adis.c
index 319b64b2fd88..f8b7837d8b8f 100644
--- a/drivers/iio/imu/adis.c
+++ b/drivers/iio/imu/adis.c
@@ -415,12 +415,11 @@ int __adis_initial_startup(struct adis *adis)
int ret;

/* check if the device has rst pin low */
- gpio = devm_gpiod_get_optional(&adis->spi->dev, "reset", GPIOD_ASIS);
+ gpio = devm_gpiod_get_optional(&adis->spi->dev, "reset", GPIOD_OUT_HIGH);
if (IS_ERR(gpio))
return PTR_ERR(gpio);

if (gpio) {
- gpiod_set_value_cansleep(gpio, 1);
msleep(10);
/* bring device out of reset */
gpiod_set_value_cansleep(gpio, 0);
--
2.32.0
\
 
 \ /
  Last update: 2021-07-08 12:00    [W:0.124 / U:1.268 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site