lkml.org 
[lkml]   [2021]   [Jul]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH V4 2/4] arm64: dts: sc7280: Add QUPv3 wrapper_0 nodes
From
Date
Quoting Rajesh Patil (2021-07-26 06:40:45)
> diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi
> index ca6e36b..455e58f 100644
> --- a/arch/arm64/boot/dts/qcom/sc7280.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi
> @@ -520,6 +520,25 @@
>
> };
>
> + qup_opp_table: qup-opp-table {

Surely this can live underneath a qup node parallel to the i2c and spi
devices?

> + compatible = "operating-points-v2";
> +
> + opp-75000000 {
> + opp-hz = /bits/ 64 <75000000>;
> + required-opps = <&rpmhpd_opp_low_svs>;
> + };
> +
> + opp-100000000 {
> + opp-hz = /bits/ 64 <100000000>;
> + required-opps = <&rpmhpd_opp_svs>;
> + };
> +
> + opp-128000000 {
> + opp-hz = /bits/ 64 <128000000>;
> + required-opps = <&rpmhpd_opp_nom>;
> + };
> + };
> +
> qupv3_id_0: geniqup@9c0000 {
> compatible = "qcom,geni-se-qup";
> reg = <0 0x009c0000 0 0x2000>;

\
 
 \ /
  Last update: 2021-07-27 21:21    [W:0.081 / U:3.200 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site