lkml.org 
[lkml]   [2021]   [Jul]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 1/2] dts: hisilicon: add support for the PMIC found on Hikey 970
Hi Mauro,

On 2021/7/26 15:43, Mauro Carvalho Chehab wrote:
> Em Mon, 26 Jul 2021 14:35:33 +0800
> Wei Xu <xuwei5@hisilicon.com> escreveu:
>
>> Hi Mauro,
>>
>> On 2021/7/26 14:19, Mauro Carvalho Chehab wrote:
>>> Em Mon, 26 Jul 2021 10:40:44 +0800
>>> Wei Xu <xuwei5@hisilicon.com> escreveu:
>>>
>>>> Hi Mauro,
>>>>
>>>> On 2021/7/24 16:55, Mauro Carvalho Chehab wrote:
>>>>> Add a device tree for the HiSilicon 6421v600 SPMI PMIC, used
>>>>> on HiKey970 board.
>>>>>
>>>>> As we now have support for it, change the fixed regulators
>>>>> used by the SD I/O to use the proper LDO supplies.
>>>>>
>>>>> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
>>>>> ---
>>>>> .../boot/dts/hisilicon/hi3670-hikey970.dts | 22 +----
>>>>> .../boot/dts/hisilicon/hikey970-pmic.dtsi | 86 +++++++++++++++++++
>>>>> 2 files changed, 89 insertions(+), 19 deletions(-)
>>>>> create mode 100644 arch/arm64/boot/dts/hisilicon/hikey970-pmic.dtsi
>>>>>
>>>>> diff --git a/arch/arm64/boot/dts/hisilicon/hi3670-hikey970.dts b/arch/arm64/boot/dts/hisilicon/hi3670-hikey970.dts
>>>>> index d8abf442ee7e..7c32f5fd5cc5 100644
>>>>> --- a/arch/arm64/boot/dts/hisilicon/hi3670-hikey970.dts
>>>>> +++ b/arch/arm64/boot/dts/hisilicon/hi3670-hikey970.dts
>>>>> @@ -12,6 +12,7 @@
>>>>>
>>>>> #include "hi3670.dtsi"
>>>>> #include "hikey970-pinctrl.dtsi"
>>>>> +#include "hikey970-pmic.dtsi"
>>>>>
>>>>> / {
>>>>> model = "HiKey970";
>>>>> @@ -39,23 +40,6 @@ memory@0 {
>>>>> reg = <0x0 0x0 0x0 0x0>;
>>>>> };
>>>>>
>>>>> - sd_1v8: regulator-1v8 {
>>>>> - compatible = "regulator-fixed";
>>>>> - regulator-name = "fixed-1.8V";
>>>>> - regulator-min-microvolt = <1800000>;
>>>>> - regulator-max-microvolt = <1800000>;
>>>>> - regulator-always-on;
>>>>> - };
>>>>> -
>>>>> - sd_3v3: regulator-3v3 {
>>>>> - compatible = "regulator-fixed";
>>>>> - regulator-name = "fixed-3.3V";
>>>>> - regulator-min-microvolt = <3300000>;
>>>>> - regulator-max-microvolt = <3300000>;
>>>>> - regulator-boot-on;
>>>>> - regulator-always-on;
>>>>> - };
>>>>> -
>>>>> wlan_en: wlan-en-1-8v {
>>>>> compatible = "regulator-fixed";
>>>>> regulator-name = "wlan-en-regulator";
>>>>> @@ -402,8 +386,8 @@ &dwmmc1 {
>>>>> pinctrl-0 = <&sd_pmx_func
>>>>> &sd_clk_cfg_func
>>>>> &sd_cfg_func>;
>>>>> - vmmc-supply = <&sd_3v3>;
>>>>> - vqmmc-supply = <&sd_1v8>;
>>>>> + vmmc-supply = <&ldo16>;
>>>>> + vqmmc-supply = <&ldo9>;
>>>>> status = "okay";
>>>>> };
>>>>>
>>>>> diff --git a/arch/arm64/boot/dts/hisilicon/hikey970-pmic.dtsi b/arch/arm64/boot/dts/hisilicon/hikey970-pmic.dtsi
>>>>> new file mode 100644
>>>>> index 000000000000..970047f2dabd
>>>>> --- /dev/null
>>>>> +++ b/arch/arm64/boot/dts/hisilicon/hikey970-pmic.dtsi
>>>>> @@ -0,0 +1,86 @@
>>>>> +// SPDX-License-Identifier: GPL-2.0
>>>>> +/*
>>>>> + * dts file for Hi6421v600 SPMI PMIC used at the HiKey970 Development Board
>>>>> + *
>>>>> + * Copyright (C) 2020, Huawei Tech. Co., Ltd.
>>>>> + */
>>>>> +
>>>>> +#include <dt-bindings/spmi/spmi.h>
>>>>> +
>>>>> +/ {
>>>>> + spmi: spmi@fff24000 {
>>>>> + compatible = "hisilicon,kirin970-spmi-controller";
>>>>> + #address-cells = <2>;
>>>>> + #size-cells = <0>;
>>>>> + status = "okay";
>>>>> + reg = <0x0 0xfff24000 0x0 0x1000>;
>>>>> + hisilicon,spmi-channel = <2>;
>>>>> +
>>>>> + pmic: pmic@0 {
>>>>> + compatible = "hisilicon,hi6421-spmi";
>>>>
>>>> Should this be "hisilicon,hi6421-pmic" which is already in the binding document "mfd/hi6421.txt"?
>>>> Others are OK to me.
>>>
>>> No.
>>>
>>> hisilicon,hi6421-pmic is used by this driver
>>> drivers/mfd/hi6421-pmic-core.c
>>>
>>> which provides support for the Hi6421 variants that don't use a MIPI
>>> SPMI bus.
>>>
>>> The "hisilicon,hi6421-spmi" compatible is for the new driver:
>>> drivers/mfd/hi6421-spmi-pmic.c
>>>
>>> And it is defined at:
>>> Documentation/devicetree/bindings/mfd/hisilicon,hi6421-spmi-pmic.yaml
>>>
>>> Both DT bindings and the driver were promoted from staging on this patch:
>>>
>>> https://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging.git/commit/?h=staging-next&id=9bd9e0de1cf5b89c4854be505ac0a418ddcc01bf
>>
>> Got it. Thanks for your kind explanation!
>> So I am fine with this patch.
>> Do you need my ack now or later I can merge it once it is out of staging.
>
> Whatever works best for you and Greg.
>
> It should be noticed that the driver should be out of staging for v5.15-rc1
> (as the patch moving it out of staging was already merged at Greg's tree).
> This patch is needed by the PCI driver patchset I'm currently working,
> so the best would be if this patch could also be merged for v5.15-rc1
> (either via HiSilicon tree or via staging tree).
>
> I suspect that having your ack and merging this via staging would work
> best, as this would ensure that both changes will be merged upstream
> at the same time.
>
> But, as I said, it is up to you both ;-)

Got it.
To avoid dependency, I think it is better to be merged by Greg's tree.
So for this patch,

Reviewed-by: Wei Xu <xuwei5@hisilicon.com>

Best Regards,
Wei

>
> Thanks,
> Mauro
> .
>

\
 
 \ /
  Last update: 2021-07-26 10:14    [W:0.077 / U:1.048 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site