lkml.org 
[lkml]   [2021]   [Jul]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v4 2/3] phy: phy-mtk-tphy: support new hardware version
Date
The PHYA arch is updated, and doesn't support slew rate calibrate
anymore on 7nm or advanced process, add a new version number to
support it.
Note: the FreqMeter bank is not used but reserved.

Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
---
v2~4: no changes
---
drivers/phy/mediatek/phy-mtk-tphy.c | 40 +++++++++++++++++++++--------
1 file changed, 29 insertions(+), 11 deletions(-)

diff --git a/drivers/phy/mediatek/phy-mtk-tphy.c b/drivers/phy/mediatek/phy-mtk-tphy.c
index 731c483a04de..42a1174da6cc 100644
--- a/drivers/phy/mediatek/phy-mtk-tphy.c
+++ b/drivers/phy/mediatek/phy-mtk-tphy.c
@@ -27,7 +27,8 @@
#define SSUSB_SIFSLV_V1_U3PHYD 0x000
#define SSUSB_SIFSLV_V1_U3PHYA 0x200

-/* version V2 sub-banks offset base address */
+/* version V2/V3 sub-banks offset base address */
+/* V3: U2FREQ is not used anymore, but reserved */
/* u2 phy banks */
#define SSUSB_SIFSLV_V2_MISC 0x000
#define SSUSB_SIFSLV_V2_U2FREQ 0x100
@@ -270,6 +271,7 @@
enum mtk_phy_version {
MTK_PHY_V1 = 1,
MTK_PHY_V2,
+ MTK_PHY_V3,
};

struct mtk_phy_pdata {
@@ -330,6 +332,10 @@ static void hs_slew_rate_calibrate(struct mtk_tphy *tphy,
int fm_out;
u32 tmp;

+ /* HW V3 doesn't support slew rate cal anymore */
+ if (tphy->pdata->version == MTK_PHY_V3)
+ return;
+
/* use force value */
if (instance->eye_src)
return;
@@ -878,7 +884,7 @@ static void u2_phy_props_set(struct mtk_tphy *tphy,
writel(tmp, com + U3P_U2PHYBC12C);
}

- if (instance->eye_src) {
+ if (tphy->pdata->version < MTK_PHY_V3 && instance->eye_src) {
tmp = readl(com + U3P_USBPHYACR5);
tmp &= ~PA5_RG_U2_HSTX_SRCTRL;
tmp |= PA5_RG_U2_HSTX_SRCTRL_VAL(instance->eye_src);
@@ -1042,11 +1048,15 @@ static struct phy *mtk_phy_xlate(struct device *dev,
return ERR_PTR(-EINVAL);
}

- if (tphy->pdata->version == MTK_PHY_V1) {
+ switch (tphy->pdata->version) {
+ case MTK_PHY_V1:
phy_v1_banks_init(tphy, instance);
- } else if (tphy->pdata->version == MTK_PHY_V2) {
+ break;
+ case MTK_PHY_V2:
+ case MTK_PHY_V3:
phy_v2_banks_init(tphy, instance);
- } else {
+ break;
+ default:
dev_err(dev, "phy version is not supported\n");
return ERR_PTR(-EINVAL);
}
@@ -1075,6 +1085,10 @@ static const struct mtk_phy_pdata tphy_v2_pdata = {
.version = MTK_PHY_V2,
};

+static const struct mtk_phy_pdata tphy_v3_pdata = {
+ .version = MTK_PHY_V3,
+};
+
static const struct mtk_phy_pdata mt8173_pdata = {
.avoid_rx_sen_degradation = true,
.version = MTK_PHY_V1,
@@ -1086,6 +1100,7 @@ static const struct of_device_id mtk_tphy_id_table[] = {
{ .compatible = "mediatek,mt8173-u3phy", .data = &mt8173_pdata },
{ .compatible = "mediatek,generic-tphy-v1", .data = &tphy_v1_pdata },
{ .compatible = "mediatek,generic-tphy-v2", .data = &tphy_v2_pdata },
+ { .compatible = "mediatek,generic-tphy-v3", .data = &tphy_v3_pdata },
{ },
};
MODULE_DEVICE_TABLE(of, mtk_tphy_id_table);
@@ -1129,12 +1144,15 @@ static int mtk_tphy_probe(struct platform_device *pdev)
}
}

- tphy->src_ref_clk = U3P_REF_CLK;
- tphy->src_coef = U3P_SLEW_RATE_COEF;
- /* update parameters of slew rate calibrate if exist */
- device_property_read_u32(dev, "mediatek,src-ref-clk-mhz",
- &tphy->src_ref_clk);
- device_property_read_u32(dev, "mediatek,src-coef", &tphy->src_coef);
+ if (tphy->pdata->version < MTK_PHY_V3) {
+ tphy->src_ref_clk = U3P_REF_CLK;
+ tphy->src_coef = U3P_SLEW_RATE_COEF;
+ /* update parameters of slew rate calibrate if exist */
+ device_property_read_u32(dev, "mediatek,src-ref-clk-mhz",
+ &tphy->src_ref_clk);
+ device_property_read_u32(dev, "mediatek,src-coef",
+ &tphy->src_coef);
+ }

port = 0;
for_each_child_of_node(np, child_np) {
--
2.18.0
\
 
 \ /
  Last update: 2021-07-23 10:23    [W:0.065 / U:20.944 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site