lkml.org 
[lkml]   [2021]   [Jul]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH AUTOSEL 4.9 13/16] pwm: tegra: Don't modify HW state in .remove callback
Date
From: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>

[ Upstream commit 86f7fa71cd830d18d7ebcaf719dffd5ddfe1acdd ]

A consumer is expected to disable a PWM before calling pwm_put(). And if
they didn't there is hopefully a good reason (or the consumer needs
fixing). Also if disabling an enabled PWM was the right thing to do,
this should better be done in the framework instead of in each low level
driver.

So drop the hardware modification from the .remove() callback.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/pwm/pwm-tegra.c | 13 -------------
1 file changed, 13 deletions(-)

diff --git a/drivers/pwm/pwm-tegra.c b/drivers/pwm/pwm-tegra.c
index 7e8906d6ab7a..d76698ce6472 100644
--- a/drivers/pwm/pwm-tegra.c
+++ b/drivers/pwm/pwm-tegra.c
@@ -228,7 +228,6 @@ static int tegra_pwm_probe(struct platform_device *pdev)
static int tegra_pwm_remove(struct platform_device *pdev)
{
struct tegra_pwm_chip *pc = platform_get_drvdata(pdev);
- unsigned int i;
int err;

if (WARN_ON(!pc))
@@ -238,18 +237,6 @@ static int tegra_pwm_remove(struct platform_device *pdev)
if (err < 0)
return err;

- for (i = 0; i < pc->chip.npwm; i++) {
- struct pwm_device *pwm = &pc->chip.pwms[i];
-
- if (!pwm_is_enabled(pwm))
- if (clk_prepare_enable(pc->clk) < 0)
- continue;
-
- pwm_writel(pc, i, 0);
-
- clk_disable_unprepare(pc->clk);
- }
-
reset_control_assert(pc->rst);
clk_disable_unprepare(pc->clk);

--
2.30.2
\
 
 \ /
  Last update: 2021-07-11 02:11    [W:0.098 / U:0.288 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site