lkml.org 
[lkml]   [2021]   [Jul]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[RFC PATCH v2 net-next 8/8] Update documentation for the VSC7512 SPI device
Date
Signed-off-by: Colin Foster <colin.foster@in-advantage.com>
---
.../devicetree/bindings/net/dsa/ocelot.txt | 68 +++++++++++++++++++
1 file changed, 68 insertions(+)

diff --git a/Documentation/devicetree/bindings/net/dsa/ocelot.txt b/Documentation/devicetree/bindings/net/dsa/ocelot.txt
index 7a271d070b72..f5d05bf8b093 100644
--- a/Documentation/devicetree/bindings/net/dsa/ocelot.txt
+++ b/Documentation/devicetree/bindings/net/dsa/ocelot.txt
@@ -8,6 +8,7 @@ Currently the switches supported by the felix driver are:

- VSC9959 (Felix)
- VSC9953 (Seville)
+- VSC7511, VSC7512, VSC7513, VSC7514 via SPI

The VSC9959 switch is found in the NXP LS1028A. It is a PCI device, part of the
larger ENETC root complex. As a result, the ethernet-switch node is a sub-node
@@ -211,3 +212,70 @@ Example:
};
};
};
+
+The VSC7513 and VSC7514 switches can be controlled internally via the MIPS
+processor. The VSC7511 and VSC7512 don't have this internal processor, but all
+four chips can be controlled externally through SPI with the following required
+properties:
+
+- compatible:
+ Can be "mscc,vsc7511", "mscc,vsc7512", "mscc,vsc7513", or
+ "mscc,vsc7514".
+
+Supported phy modes for all chips are:
+
+* phy_mode = "internal": on ports 0, 1, 2, 3
+
+Additionally, the VSC7512 and VSC7514 support SGMII and QSGMII on various ports,
+though that is currently untested.
+
+Example for control from a BeagleBone Black
+
+&spi0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "okay";
+
+ vsc7512: vsc7512@0 {
+ compatible = "mscc,vsc7512";
+ spi-max-frequency = <250000>;
+ reg = <0>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ ethernet = <&mac>;
+ phy-mode = "internal";
+
+ fixed-link {
+ speed = <100>;
+ full-duplex;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ label = "swp1";
+ status = "okay";
+ phy-mode = "internal";
+ };
+
+ port@2 {
+ reg = <2>;
+ label = "swp2";
+ status = "okay";
+ phy-mode = "internal";
+ };
+
+ port@3 {
+ reg = <3>;
+ label = "swp3";
+ status = "okay";
+ phy-mode = "internal";
+ };
+ };
+ };
+};
--
2.25.1
\
 
 \ /
  Last update: 2021-07-10 21:27    [W:0.123 / U:0.300 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site