lkml.org 
[lkml]   [2021]   [Jul]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] ARM: dts: sun8i: h3: orangepi-plus: Fix ethernet phy-mode
Hi Maxime,

On Mon, May 24, 2021 at 02:35:06PM +0200, Maxime Ripard wrote:
> On Mon, May 24, 2021 at 02:21:11PM +0200, Salvatore Bonaccorso wrote:
> > Commit bbc4d71d6354 ("net: phy: realtek: fix rtl8211e rx/tx delay
> > config") sets the RX/TX delay according to the phy-mode property in the
> > device tree. For the Orange Pi Plus board this is "rgmii", which is the
> > wrong setting.
> >
> > Following the example of a900cac3750b ("ARM: dts: sun7i: a20: bananapro:
> > Fix ethernet phy-mode") the phy-mode is changed to "rgmii-id" which gets
> > the Ethernet working again on this board.
> >
> > Fixes: bbc4d71d6354 ("net: phy: realtek: fix rtl8211e rx/tx delay config")
> > Reported-by: "B.R. Oake" <broake@mailfence.com>
> > Reported-by: Vagrant Cascadian <vagrant@reproducible-builds.org>
> > Link: https://bugs.debian.org/988574
> > Signed-off-by: Salvatore Bonaccorso <carnil@debian.org>
>
> Applied, thanks!

Did this fall trough the cracks?

I see it in
https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux.git/commit/?id=b19d3479f25e8a0ff24df0b46c82e50ef0f900dd
but got not merged yet in mainline.

Thank you for your work!

Regards,
Salvatore

\
 
 \ /
  Last update: 2021-07-10 15:10    [W:0.050 / U:0.320 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site