lkml.org 
[lkml]   [2021]   [Jul]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [Patch v3 3/6] cpufreq: qcom-cpufreq-hw: Add dcvs interrupt support
On Thu 08 Jul 07:06 CDT 2021, Thara Gopinath wrote:

> Add interrupt support to notify the kernel of h/w initiated frequency
> throttling by LMh. Convey this to scheduler via thermal presssure
> interface.
>
> Signed-off-by: Thara Gopinath <thara.gopinath@linaro.org>
> ---
>
> v2->v3:
> - Cosmetic fixes from review comments on the list.
> - Moved all LMh initializations to qcom_cpufreq_hw_lmh_init.
> - Added freeing of LMh interrupt and cancelling the polling worker to
> qcom_cpufreq_hw_cpu_exit as per Viresh's suggestion.
> - LMh interrupts are now tied to cpu dev and not cpufreq dev. This will be
> useful for further generation of SoCs where the same interrupt signals
> multiple cpu clusters.
>
> v1->v2:
> - Introduced qcom_cpufreq_hw_lmh_init to consolidate LMh related initializations
> as per Viresh's review comment.
> - Moved the piece of code restarting polling/re-enabling LMh interrupt to
> qcom_lmh_dcvs_notify therby simplifying isr and timer callback as per Viresh's
> suggestion.
> - Droped cpus from qcom_cpufreq_data and instead using cpus from cpufreq_policy in
> qcom_lmh_dcvs_notify as per Viresh's review comment.
> - Dropped dt property qcom,support-lmh as per Bjorn's suggestion.
> - Other minor/cosmetic fixes
>
> drivers/cpufreq/qcom-cpufreq-hw.c | 118 ++++++++++++++++++++++++++++++
> 1 file changed, 118 insertions(+)
>
> diff --git a/drivers/cpufreq/qcom-cpufreq-hw.c b/drivers/cpufreq/qcom-cpufreq-hw.c
> index f86859bf76f1..bb5fc700d913 100644
> --- a/drivers/cpufreq/qcom-cpufreq-hw.c
> +++ b/drivers/cpufreq/qcom-cpufreq-hw.c
> @@ -7,6 +7,7 @@
> #include <linux/cpufreq.h>
> #include <linux/init.h>
> #include <linux/interconnect.h>
> +#include <linux/interrupt.h>
> #include <linux/kernel.h>
> #include <linux/module.h>
> #include <linux/of_address.h>
> @@ -22,10 +23,13 @@
> #define CLK_HW_DIV 2
> #define LUT_TURBO_IND 1
>
> +#define HZ_PER_KHZ 1000
> +
> struct qcom_cpufreq_soc_data {
> u32 reg_enable;
> u32 reg_freq_lut;
> u32 reg_volt_lut;
> + u32 reg_current_vote;
> u32 reg_perf_state;
> u8 lut_row_size;
> };
> @@ -33,7 +37,10 @@ struct qcom_cpufreq_soc_data {
> struct qcom_cpufreq_data {
> void __iomem *base;
> struct resource *res;
> + struct delayed_work lmh_dcvs_poll_work;

How about dropping "lmh" from this variable name?

Perhaps "throttle_work" or something like that?

> const struct qcom_cpufreq_soc_data *soc_data;
> + struct cpufreq_policy *policy;
> + int lmh_dcvs_irq;

throttle_irq ?

> };
>
> static unsigned long cpu_hw_rate, xo_rate;
> @@ -251,10 +258,84 @@ static void qcom_get_related_cpus(int index, struct cpumask *m)
> }
> }
>
> +static inline unsigned long qcom_lmh_vote_to_freq(u32 val)
> +{
> + return (val & 0x3FF) * 19200;
> +}
> +
> +static void qcom_lmh_dcvs_notify(struct qcom_cpufreq_data *data)
> +{
> + struct cpufreq_policy *policy = data->policy;
> + struct dev_pm_opp *opp;
> + struct device *dev;
> + unsigned long max_capacity, capacity, freq_hz, throttled_freq;
> + unsigned int val, freq;
> +
> + /*
> + * Get the h/w throttled frequency, normalize it using the
> + * registered opp table and use it to calculate thermal pressure.
> + */
> + val = readl_relaxed(data->base + data->soc_data->reg_current_vote);

I would find it cleaner to move the readl() into the helper function, as
you don't care about the register value, only the resulting frequency.

> + freq = qcom_lmh_vote_to_freq(val);
> + freq_hz = freq * HZ_PER_KHZ;
> +
> + dev = get_cpu_device(cpumask_first(policy->cpus));
> + opp = dev_pm_opp_find_freq_floor(dev, &freq_hz);
> + if (IS_ERR(opp) && PTR_ERR(opp) == -ERANGE)
> + opp = dev_pm_opp_find_freq_ceil(dev, &freq_hz);
> +
> + throttled_freq = freq_hz / HZ_PER_KHZ;
> +
> + /* Update thermal pressure */
> +
> + max_capacity = arch_scale_cpu_capacity(cpumask_first(policy->cpus));
> + capacity = throttled_freq * max_capacity;
> + capacity /= policy->cpuinfo.max_freq;

Perhaps, to avoid overflows if this is ever used on a 32-bit platform
use:

mult_frac(max_capacity, throttled_freq, policy->cpuinfo.max_freq)

> +
> + /* Don't pass boost capacity to scheduler */
> + if (capacity > max_capacity)
> + capacity = max_capacity;
> +
> + arch_set_thermal_pressure(policy->cpus, max_capacity - capacity);
> +
> + /*
> + * If h/w throttled frequency is higher than what cpufreq has requested for, stop
> + * polling and switch back to interrupt mechanism
> + */
> +
> + if (throttled_freq >= qcom_cpufreq_hw_get(cpumask_first(policy->cpus)))
> + /* Clear the existing interrupts and enable it back */
> + enable_irq(data->lmh_dcvs_irq);
> + else
> + mod_delayed_work(system_highpri_wq, &data->lmh_dcvs_poll_work,
> + msecs_to_jiffies(10));
> +}
> +
> +static void qcom_lmh_dcvs_poll(struct work_struct *work)
> +{
> + struct qcom_cpufreq_data *data;
> +
> + data = container_of(work, struct qcom_cpufreq_data, lmh_dcvs_poll_work.work);
> +
> + qcom_lmh_dcvs_notify(data);
> +}
> +
> +static irqreturn_t qcom_lmh_dcvs_handle_irq(int irq, void *data)
> +{
> + struct qcom_cpufreq_data *c_data = data;
> +
> + /* Disable interrupt and enable polling */
> + disable_irq_nosync(c_data->lmh_dcvs_irq);
> + qcom_lmh_dcvs_notify(c_data);
> +
> + return 0;
> +}
> +
> static const struct qcom_cpufreq_soc_data qcom_soc_data = {
> .reg_enable = 0x0,
> .reg_freq_lut = 0x110,
> .reg_volt_lut = 0x114,
> + .reg_current_vote = 0x704,
> .reg_perf_state = 0x920,
> .lut_row_size = 32,
> };
> @@ -274,6 +355,35 @@ static const struct of_device_id qcom_cpufreq_hw_match[] = {
> };
> MODULE_DEVICE_TABLE(of, qcom_cpufreq_hw_match);
>
> +static int qcom_cpufreq_hw_lmh_init(struct cpufreq_policy *policy, int index)
> +{
> + struct qcom_cpufreq_data *data = policy->driver_data;
> + struct platform_device *pdev = cpufreq_get_driver_data();
> + struct device *cpu_dev = get_cpu_device(policy->cpu);
> + char irq_name[15];
> + int ret;
> +
> + /*
> + * Look for LMh interrupt. If no interrupt line is specified /
> + * if there is an error, allow cpufreq to be enabled as usual.
> + */
> + data->lmh_dcvs_irq = platform_get_irq(pdev, index);
> + if (data->lmh_dcvs_irq <= 0)
> + return data->lmh_dcvs_irq == -EPROBE_DEFER ? -EPROBE_DEFER : 0;
> +
> + snprintf(irq_name, sizeof(irq_name), "dcvsh-irq-%u", policy->cpu);
> + ret = devm_request_irq(cpu_dev, data->lmh_dcvs_irq, qcom_lmh_dcvs_handle_irq,
> + 0, irq_name, data);
> + if (ret) {
> + dev_err(&pdev->dev, "Error %d registering irq %x\n", ret, data->lmh_dcvs_irq);

The irq number here won't have any meaning, and %x wouldn't be suitable.

How about ..."Error registering %s: %d\n", irq_name, ret); ?

> + return 0;

This sounds like a problem, wouldn't it be suitable to treat it as a
problem?

> + }
> + data->policy = policy;

Afaict, no one is going to access data->policy unless devm_request_irq()
succeeds and if it does and the interrupt fires immediately it would be
too late to set it here. So better move it earlier.

> + INIT_DEFERRABLE_WORK(&data->lmh_dcvs_poll_work, qcom_lmh_dcvs_poll);

What if the interrupt fires before you initialize the work? Better move
this higher up.

> +
> + return 0;
> +}
> +
> static int qcom_cpufreq_hw_cpu_init(struct cpufreq_policy *policy)
> {
> struct platform_device *pdev = cpufreq_get_driver_data();
> @@ -370,6 +480,10 @@ static int qcom_cpufreq_hw_cpu_init(struct cpufreq_policy *policy)
> dev_warn(cpu_dev, "failed to enable boost: %d\n", ret);
> }
>
> + ret = qcom_cpufreq_hw_lmh_init(policy, index);
> + if (ret)
> + goto error;
> +
> return 0;
> error:
> kfree(data);
> @@ -389,6 +503,10 @@ static int qcom_cpufreq_hw_cpu_exit(struct cpufreq_policy *policy)
>
> dev_pm_opp_remove_all_dynamic(cpu_dev);
> dev_pm_opp_of_cpumask_remove_table(policy->related_cpus);
> + if (data->lmh_dcvs_irq > 0) {
> + devm_free_irq(cpu_dev, data->lmh_dcvs_irq, data);

As init/exit are called multiple times you should avoid the devm
variants.

Regards,
Bjorn

> + cancel_delayed_work_sync(&data->lmh_dcvs_poll_work);
> + }
> kfree(policy->freq_table);
> kfree(data);
> iounmap(base);
> --
> 2.25.1
>

\
 
 \ /
  Last update: 2021-07-10 06:59    [W:0.605 / U:0.012 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site