lkml.org 
[lkml]   [2021]   [Jun]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 10/24] iommu/mediatek: Always enable output PA over 32bits in isr
Date
Currently the output PA[32:33] is contained by the flag IOVA_34.
This is not right. the iova_34 has no relation with pa[32:33].
the 32bits iova still could map to pa[32:33], This patch move it
out of the flag.

This patch no need fix tag since currently only mt8192 use the
calulation and it always has this IOVA_34 flag.

This is preparing for the IOMMU that still use IOVA 32bits.

Signed-off-by: Yong Wu <yong.wu@mediatek.com>
---
drivers/iommu/mtk_iommu.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/iommu/mtk_iommu.c b/drivers/iommu/mtk_iommu.c
index fcf70787d3d1..35e321ed6d3d 100644
--- a/drivers/iommu/mtk_iommu.c
+++ b/drivers/iommu/mtk_iommu.c
@@ -287,11 +287,11 @@ static irqreturn_t mtk_iommu_isr(int irq, void *dev_id)
write = fault_iova & F_MMU_FAULT_VA_WRITE_BIT;
if (MTK_IOMMU_HAS_FLAG(data->plat_data, IOVA_34_EN)) {
va34_32 = FIELD_GET(F_MMU_INVAL_VA_34_32_MASK, fault_iova);
- pa34_32 = FIELD_GET(F_MMU_INVAL_PA_34_32_MASK, fault_iova);
fault_iova = fault_iova & F_MMU_INVAL_VA_31_12_MASK;
fault_iova |= (u64)va34_32 << 32;
- fault_pa |= (u64)pa34_32 << 32;
}
+ pa34_32 = FIELD_GET(F_MMU_INVAL_PA_34_32_MASK, fault_iova);
+ fault_pa |= (u64)pa34_32 << 32;

fault_port = F_MMU_INT_ID_PORT_ID(regval);
if (MTK_IOMMU_HAS_FLAG(data->plat_data, HAS_SUB_COMM)) {
--
2.18.0
\
 
 \ /
  Last update: 2021-06-30 04:37    [W:0.152 / U:0.260 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site