lkml.org 
[lkml]   [2021]   [Jun]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH] arm64: dts: rockchip: add rock-pi-4 analog audio
From
Date
On 2021-06-29 16:07, Adrian Ratiu wrote:
> Hi Alex,
>
> On Tue, 29 Jun 2021, Alex Bee <knaerzche@gmail.com> wrote:
>> Hi Adrian,
>> I've submitted similar patch already. Its part of [1]
>
> Thank you for pointing out your patch, I was not aware of it as it was
> not merged yet (I tested latest linux-next).
>
> It is a good sign that our code is almost identical except for the
> headphone detect pin which you mention.
>
>>
>> There is no headphone detection pin in the schematics, btw.
>
> There are two reasons I added it:
>
> 1. The es8316 codec failed to probe() in my testing unless the irq was
> defined. That might have been due to me testing the codec directly with
> the simple card driver instead of the graph driver.
>
> Point 1 doesn't appear to be an issue anymore, the codec + graph driver
> probe correctly and audio supposedly (see below) works even without the
> irq.
>
> 2. I got the gpio bank 1 pin 0 location from various headphone detection
> commits in the vendor v4.4 kernel, like for example [1].
>
> Are you 100% sure there is no hp detection pin wired on the rock-pi-4?
> Even if it might be missing from the schematics, the vendor driver code
> apparently defines and uses it?

FWIW according to the schematics it *is* wired up on the Model C board,
but not on the Model A or B.

Robin.

> From booting with the irq defined I get the following in
> /proc/interrupts however I'm having an unrelated difficulty testing
> because the audio connector literally broke off the board like in [2].
> 90: 1  0  0  0  0  rockchip_gpio_irq   0 Level     es8316
>
> Team Radxa was very nice in offering me a replacement but until that
> arrives I can't test this anymore.
>
> [1]
> https://github.com/radxa/kernel/commit/e945cad5c3ec82d171760465d3c7a84bb10ed1b7
>
>
> [2] https://forum.radxa.com/t/audio-jack-broke-off/935
>
>> [1]
>> https://patchwork.kernel.org/project/linux-rockchip/cover/20210618181256.27992-1-knaerzche@gmail.com/
>>
>>
>> Best,
>>
>> Alex
>>
>> Am 28.06.21 um 13:30 schrieb Adrian Ratiu:
>>> This adds the necessary pinctrl and nodes to enable the
>>> analog audio on rk3399 rock-pi-4 SBCs using the es8316
>>> codec and the audio-graph-card driver.
>>>
>>> Signed-off-by: Adrian Ratiu <adrian.ratiu@collabora.com>
>>> ---
>>>   .../boot/dts/rockchip/rk3399-rock-pi-4.dtsi   | 38 +++++++++++++++++++
>>>   1 file changed, 38 insertions(+)
>>>
>>> diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dtsi
>>> b/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dtsi
>>> index b28888ea9262..77781d9150ac 100644
>>> --- a/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dtsi
>>> +++ b/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dtsi
>>> @@ -128,6 +128,12 @@ vdd_log: vdd-log {
>>>           regulator-max-microvolt = <1400000>;
>>>           vin-supply = <&vcc5v0_sys>;
>>>       };
>>> +
>>> +    sound {
>>> +        compatible = "audio-graph-card";
>>> +        label = "rockchip,rk3399";
>>> +        dais = <&i2s0_p0>;
>>> +    };
>>>   };
>>>   &cpu_l0 {
>>> @@ -422,6 +428,24 @@ &i2c1 {
>>>       i2c-scl-rising-time-ns = <300>;
>>>       i2c-scl-falling-time-ns = <15>;
>>>       status = "okay";
>>> +
>>> +    es8316: codec@11 {
>>> +        compatible = "everest,es8316";
>>> +        reg = <0x11>;
>>> +        clocks = <&cru SCLK_I2S_8CH_OUT>;
>>> +        clock-names = "mclk";
>>> +        pinctrl-names = "default";
>>> +        pinctrl-0 = <&hp_det_pin>;
>>> +        interrupt-parent = <&gpio1>;
>>> +        interrupts = <RK_PA0 IRQ_TYPE_LEVEL_HIGH>;
>>> +        #sound-dai-cells = <0>;
>>> +
>>> +        port {
>>> +            es8316_p0_0: endpoint {
>>> +                remote-endpoint = <&i2s0_p0_0>;
>>> +            };
>>> +        };
>>> +    };
>>>   };
>>>   &i2c3 {
>>> @@ -441,6 +465,14 @@ &i2s0 {
>>>       rockchip,capture-channels = <2>;
>>>       rockchip,playback-channels = <2>;
>>>       status = "okay";
>>> +
>>> +    i2s0_p0: port {
>>> +        i2s0_p0_0: endpoint {
>>> +            dai-format = "i2s";
>>> +            mclk-fs = <256>;
>>> +            remote-endpoint = <&es8316_p0_0>;
>>> +        };
>>> +    };
>>>   };
>>>   &i2s1 {
>>> @@ -556,6 +588,12 @@ wifi_host_wake_l: wifi-host-wake-l {
>>>               rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;
>>>           };
>>>       };
>>> +
>>> +    es8316 {
>>> +        hp_det_pin: hp-det-pin {
>>> +            rockchip,pins = <1 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>;
>>> +        };
>>> +    };
>>>   };
>>>   &pwm2 {
>
> _______________________________________________
> Linux-rockchip mailing list
> Linux-rockchip@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-rockchip

\
 
 \ /
  Last update: 2021-06-29 17:43    [W:0.073 / U:0.408 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site