lkml.org 
[lkml]   [2021]   [Jun]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v5] rtc: pcf2127: handle timestamp interrupts
On Mon, Jun 28, 2021 at 11:18:28AM +0200, Bruno Thomsen wrote:
> Hi Mian,
>
> I think your approach to use existing timestamp handling when no irq
> is configured is correct. But I have some review comments and in
> the current form it oops (included at the end of patch).
Thank you for the review and testing! I am sorry about the oops.
>
> /Bruno
>
> Den tor. 24. jun. 2021 kl. 17.22 skrev Mian Yousaf Kaukab <ykaukab@suse.de>:
> >
> > commit 03623b4b041c ("rtc: pcf2127: add tamper detection support")
> > added support for timestamp interrupts. However they are not being
> > handled in the irq handler. If a timestamp interrupt occurs it
> > results in kernel disabling the interrupt and displaying the call
> > trace:
> >
> > [ 121.145580] irq 78: nobody cared (try booting with the "irqpoll" option)
> > ...
> > [ 121.238087] [<00000000c4d69393>] irq_default_primary_handler threaded [<000000000a90d25b>] pcf2127_rtc_irq [rtc_pcf2127]
> > [ 121.248971] Disabling IRQ #78
> >
> > Handle timestamp interrupts in pcf2127_rtc_irq(). Save time stamp
> > before clearing TSF1 and TSF2 flags so that it can't be overwritten.
> > Set a flag to mark if the timestamp is valid and only report to sysfs
> > if the flag is set. To mimic the hardware behavior, don’t save
> > another timestamp until the first one has been read by the userspace.
> >
> > However, if the alarm irq is not configured, keep the old way of
> > handling timestamp interrupt in the timestamp0 sysfs calls.
> >
> > Signed-off-by: Mian Yousaf Kaukab <ykaukab@suse.de>
> > ---
> > *Only compile tested due to lack of hardware availability*
> >
> > history:
> > v5: -Add irq_enabled flag to keep track of alarm irq. Revert
> > to current way of handling timestamp interrupt in sysfs callsbacks
> > if alarm irq is not configured
> > v4: -Save timestamp before clearing TSF1 and TSF2 flags
> > -Rename timstamp_valid flag to ts_valid
> > v3: -Restore call to pcf2127_wdt_active_ping() in timestamp0_store().
> > It was removed by mistake.
> > v2: -Add a flag to mark the occurrence of timestamp interrupt
> > -Add Biwen Li in Cc
> >
> > drivers/rtc/rtc-pcf2127.c | 172 +++++++++++++++++++++++++++-----------
> > 1 file changed, 121 insertions(+), 51 deletions(-)
> >
> > diff --git a/drivers/rtc/rtc-pcf2127.c b/drivers/rtc/rtc-pcf2127.c
> > index 48ce1e85deb1..5a7e673349ed 100644
> > --- a/drivers/rtc/rtc-pcf2127.c
> > +++ b/drivers/rtc/rtc-pcf2127.c
> > @@ -94,10 +94,20 @@
> > #define PCF2127_WD_VAL_MAX 255
> > #define PCF2127_WD_VAL_DEFAULT 60
> >
> > +/* Mask for currently enabled interrupts */
> > +#define PCF2127_CTRL1_IRQ_MASK (PCF2127_BIT_CTRL1_TSF1)
> > +#define PCF2127_CTRL2_IRQ_MASK ( \
> > + PCF2127_BIT_CTRL2_AF | \
> > + PCF2127_BIT_CTRL2_WDTF | \
> > + PCF2127_BIT_CTRL2_TSF2)
> > +
> > struct pcf2127 {
> > struct rtc_device *rtc;
> > struct watchdog_device wdd;
> > struct regmap *regmap;
> > + time64_t ts;
> > + bool ts_valid;
> > + bool irq_enabled;
> > };
> >
> > /*
> > @@ -434,23 +444,92 @@ static int pcf2127_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alrm)
> > return pcf2127_rtc_alarm_irq_enable(dev, alrm->enabled);
> > }
> >
> > +static int pcf2127_rtc_ts_read(struct device *dev, time64_t *ts)
> > +{
> > + struct pcf2127 *pcf2127 = dev_get_drvdata(dev);
> > + struct rtc_time tm;
> > + int ret;
> > + unsigned char data[25];
> > +
> > + ret = regmap_bulk_read(pcf2127->regmap, PCF2127_REG_CTRL1, data,
> > + sizeof(data));
> > + if (ret) {
> > + dev_err(dev, "%s: read error ret=%d\n", __func__, ret);
> > + return ret;
> > + }
>
> The above regmap call reads ctrl2 register so you need to call
> pcf2127_wdt_active_ping()
>
I will add a comment here to make it the responsibility of the caller.
Both callers are already calling pcf2127_wdt_active_ping()
> > +
> > + dev_dbg(dev,
> > + "%s: raw data is cr1=%02x, cr2=%02x, cr3=%02x, ts_sc=%02x, ts_mn=%02x, ts_hr=%02x, ts_dm=%02x, ts_mo=%02x, ts_yr=%02x\n",
> > + __func__, data[PCF2127_REG_CTRL1], data[PCF2127_REG_CTRL2],
> > + data[PCF2127_REG_CTRL3], data[PCF2127_REG_TS_SC],
> > + data[PCF2127_REG_TS_MN], data[PCF2127_REG_TS_HR],
> > + data[PCF2127_REG_TS_DM], data[PCF2127_REG_TS_MO],
> > + data[PCF2127_REG_TS_YR]);
> > +
> > + tm.tm_sec = bcd2bin(data[PCF2127_REG_TS_SC] & 0x7F);
> > + tm.tm_min = bcd2bin(data[PCF2127_REG_TS_MN] & 0x7F);
> > + tm.tm_hour = bcd2bin(data[PCF2127_REG_TS_HR] & 0x3F);
> > + tm.tm_mday = bcd2bin(data[PCF2127_REG_TS_DM] & 0x3F);
> > + /* TS_MO register (month) value range: 1-12 */
> > + tm.tm_mon = bcd2bin(data[PCF2127_REG_TS_MO] & 0x1F) - 1;
> > + tm.tm_year = bcd2bin(data[PCF2127_REG_TS_YR]);
> > + if (tm.tm_year < 70)
> > + tm.tm_year += 100; /* assume we are in 1970...2069 */
> > +
> > + ret = rtc_valid_tm(&tm);
> > + if (ret) {
> > + dev_err(dev, "Invalid timestamp. ret=%d\n", ret);
> > + return ret;
> > + }
> > +
> > + *ts = rtc_tm_to_time64(&tm);
> > + return 0;
> > +};
> > +
> > +static void pcf2127_rtc_ts_snapshot(struct device *dev)
> > +{
> > + struct pcf2127 *pcf2127 = dev_get_drvdata(dev);
> > + int ret;
> > +
> > + /* Let userspace read the first timestamp */
> > + if (pcf2127->ts_valid)
> > + return;
> > +
> > + ret = pcf2127_rtc_ts_read(dev, &pcf2127->ts);
> > + if (!ret)
> > + pcf2127->ts_valid = true;
> > +}
> > +
> > static irqreturn_t pcf2127_rtc_irq(int irq, void *dev)
> > {
> > struct pcf2127 *pcf2127 = dev_get_drvdata(dev);
> > - unsigned int ctrl2 = 0;
> > + unsigned int ctrl1, ctrl2;
> > int ret = 0;
> >
> > + ret = regmap_read(pcf2127->regmap, PCF2127_REG_CTRL1, &ctrl1);
> > + if (ret)
> > + return IRQ_NONE;
> > +
> > ret = regmap_read(pcf2127->regmap, PCF2127_REG_CTRL2, &ctrl2);
> > if (ret)
> > return IRQ_NONE;
> >
> > - if (!(ctrl2 & PCF2127_BIT_CTRL2_AF))
> > + if (!(ctrl1 & PCF2127_CTRL1_IRQ_MASK || ctrl2 & PCF2127_CTRL2_IRQ_MASK))
> > return IRQ_NONE;
> >
> > - regmap_write(pcf2127->regmap, PCF2127_REG_CTRL2,
> > - ctrl2 & ~(PCF2127_BIT_CTRL2_AF | PCF2127_BIT_CTRL2_WDTF));
> > + if (ctrl1 & PCF2127_BIT_CTRL1_TSF1 || ctrl2 & PCF2127_BIT_CTRL2_TSF2)
> > + pcf2127_rtc_ts_snapshot(dev);
> > +
> > + if (ctrl1 & PCF2127_CTRL1_IRQ_MASK)
> > + regmap_write(pcf2127->regmap, PCF2127_REG_CTRL1,
> > + ctrl1 & ~PCF2127_CTRL1_IRQ_MASK);
> > +
> > + if (ctrl2 & PCF2127_CTRL2_IRQ_MASK)
> > + regmap_write(pcf2127->regmap, PCF2127_REG_CTRL2,
> > + ctrl2 & ~PCF2127_CTRL2_IRQ_MASK);
> >
> > - rtc_update_irq(pcf2127->rtc, 1, RTC_IRQF | RTC_AF);
> > + if (ctrl2 & PCF2127_BIT_CTRL2_AF)
> > + rtc_update_irq(pcf2127->rtc, 1, RTC_IRQF | RTC_AF);
> >
> > pcf2127_wdt_active_ping(&pcf2127->wdd);
> >
> > @@ -475,18 +554,22 @@ static ssize_t timestamp0_store(struct device *dev,
> > struct pcf2127 *pcf2127 = dev_get_drvdata(dev->parent);
> > int ret;
> >
> > - ret = regmap_update_bits(pcf2127->regmap, PCF2127_REG_CTRL1,
> > - PCF2127_BIT_CTRL1_TSF1, 0);
> > - if (ret) {
> > - dev_err(dev, "%s: update ctrl1 ret=%d\n", __func__, ret);
> > - return ret;
> > - }
> > + if (pcf2127->irq_enabled) {
> > + pcf2127->ts_valid = false;
> > + } else {
> > + ret = regmap_update_bits(pcf2127->regmap, PCF2127_REG_CTRL1,
> > + PCF2127_BIT_CTRL1_TSF1, 0);
> > + if (ret) {
> > + dev_err(dev, "%s: update ctrl1 ret=%d\n", __func__, ret);
> > + return ret;
> > + }
> >
> > - ret = regmap_update_bits(pcf2127->regmap, PCF2127_REG_CTRL2,
> > - PCF2127_BIT_CTRL2_TSF2, 0);
> > - if (ret) {
> > - dev_err(dev, "%s: update ctrl2 ret=%d\n", __func__, ret);
> > - return ret;
> > + ret = regmap_update_bits(pcf2127->regmap, PCF2127_REG_CTRL2,
> > + PCF2127_BIT_CTRL2_TSF2, 0);
> > + if (ret) {
> > + dev_err(dev, "%s: update ctrl2 ret=%d\n", __func__, ret);
> > + return ret;
> > + }
> > }
> >
> > ret = pcf2127_wdt_active_ping(&pcf2127->wdd);
>
> After the rework of this function this pcf2127_wdt_active_ping() call
> should be moved into the end of the else condition of irq_enabled.
> As it's only needed after reading the ctrl2 register.
>
Done.
> > @@ -500,50 +583,36 @@ static ssize_t timestamp0_show(struct device *dev,
> > struct device_attribute *attr, char *buf)
> > {
> > struct pcf2127 *pcf2127 = dev_get_drvdata(dev->parent);
> > - struct rtc_time tm;
> > + unsigned int ctrl1, ctrl2;
> > int ret;
> > - unsigned char data[25];
> > -
> > - ret = regmap_bulk_read(pcf2127->regmap, PCF2127_REG_CTRL1, data,
> > - sizeof(data));
> > - if (ret) {
> > - dev_err(dev, "%s: read error ret=%d\n", __func__, ret);
> > - return ret;
> > - }
> > -
> > - dev_dbg(dev,
> > - "%s: raw data is cr1=%02x, cr2=%02x, cr3=%02x, ts_sc=%02x, "
> > - "ts_mn=%02x, ts_hr=%02x, ts_dm=%02x, ts_mo=%02x, ts_yr=%02x\n",
> > - __func__, data[PCF2127_REG_CTRL1], data[PCF2127_REG_CTRL2],
> > - data[PCF2127_REG_CTRL3], data[PCF2127_REG_TS_SC],
> > - data[PCF2127_REG_TS_MN], data[PCF2127_REG_TS_HR],
> > - data[PCF2127_REG_TS_DM], data[PCF2127_REG_TS_MO],
> > - data[PCF2127_REG_TS_YR]);
> > + time64_t ts;
> >
> > ret = pcf2127_wdt_active_ping(&pcf2127->wdd);
> > if (ret)
> > return ret;
>
> The 3 lines above need to be moved down to the next comment.
>
> >
> > - if (!(data[PCF2127_REG_CTRL1] & PCF2127_BIT_CTRL1_TSF1) &&
> > - !(data[PCF2127_REG_CTRL2] & PCF2127_BIT_CTRL2_TSF2))
> > - return 0;
> > + if (pcf2127->irq_enabled) {
> > + if (!pcf2127->ts_valid)
> > + return 0;
> > + ts = pcf2127->ts;
> > + } else {
> > + ret = regmap_read(pcf2127->regmap, PCF2127_REG_CTRL1, &ctrl1);
> > + if (ret)
> > + return 0;
> >
> > - tm.tm_sec = bcd2bin(data[PCF2127_REG_TS_SC] & 0x7F);
> > - tm.tm_min = bcd2bin(data[PCF2127_REG_TS_MN] & 0x7F);
> > - tm.tm_hour = bcd2bin(data[PCF2127_REG_TS_HR] & 0x3F);
> > - tm.tm_mday = bcd2bin(data[PCF2127_REG_TS_DM] & 0x3F);
> > - /* TS_MO register (month) value range: 1-12 */
> > - tm.tm_mon = bcd2bin(data[PCF2127_REG_TS_MO] & 0x1F) - 1;
> > - tm.tm_year = bcd2bin(data[PCF2127_REG_TS_YR]);
> > - if (tm.tm_year < 70)
> > - tm.tm_year += 100; /* assume we are in 1970...2069 */
> > + ret = regmap_read(pcf2127->regmap, PCF2127_REG_CTRL2, &ctrl2);
> > + if (ret)
> > + return 0;
>
> Insert pcf2127_wdt_active_ping() here.
>
I will move it after the call to pcf2127_rtc_ts_read().
> > - ret = rtc_valid_tm(&tm);
> > - if (ret)
> > - return ret;
> > + if (!(ctrl1 & PCF2127_BIT_CTRL1_TSF1) &&
> > + !(ctrl2 & PCF2127_BIT_CTRL2_TSF2))
> > + return 0;
> >
> > - return sprintf(buf, "%llu\n",
> > - (unsigned long long)rtc_tm_to_time64(&tm));
> > + ret = pcf2127_rtc_ts_read(dev, &ts);
> > + if (ret)
> > + return 0;
> > + }
> > + return sprintf(buf, "%llu\n", (unsigned long long)ts);
> > };
> >
> > static DEVICE_ATTR_RW(timestamp0);
> > @@ -594,6 +663,7 @@ static int pcf2127_probe(struct device *dev, struct regmap *regmap,
> > dev_err(dev, "failed to request alarm irq\n");
> > return ret;
> > }
> > + pcf2127->irq_enabled = true;
> > }
>
> Add an else condition here with:
> pcf2127->irq_enabled = false;
>
> Otherwise irq_enabled is read before set when running without irq.
>
No need. pcf2127 is allocated using devm_kzalloc().
> >
> > if (alarm_irq > 0 || device_property_read_bool(dev, "wakeup-source")) {
> > --
> > 2.26.2
> >

BR,
Yousaf

\
 
 \ /
  Last update: 2021-06-29 16:48    [W:0.178 / U:0.412 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site