lkml.org 
[lkml]   [2021]   [Mar]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v3 1/6] clk: tegra30: Use 300MHz for video decoder by default
Date
The 600MHz is a too high clock rate for some SoC versions for the video
decoder hardware and this may cause stability issues. Use 300MHz for the
video decoder by default, which is supported by all hardware versions.

Fixes: ed1a2459e20c ("clk: tegra: Add Tegra20/30 EMC clock implementation")
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
---
drivers/clk/tegra/clk-tegra30.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/clk/tegra/clk-tegra30.c b/drivers/clk/tegra/clk-tegra30.c
index 16dbf83d2f62..a33688b2359e 100644
--- a/drivers/clk/tegra/clk-tegra30.c
+++ b/drivers/clk/tegra/clk-tegra30.c
@@ -1245,7 +1245,7 @@ static struct tegra_clk_init_table init_table[] __initdata = {
{ TEGRA30_CLK_GR3D, TEGRA30_CLK_PLL_C, 300000000, 0 },
{ TEGRA30_CLK_GR3D2, TEGRA30_CLK_PLL_C, 300000000, 0 },
{ TEGRA30_CLK_PLL_U, TEGRA30_CLK_CLK_MAX, 480000000, 0 },
- { TEGRA30_CLK_VDE, TEGRA30_CLK_PLL_C, 600000000, 0 },
+ { TEGRA30_CLK_VDE, TEGRA30_CLK_PLL_C, 300000000, 0 },
{ TEGRA30_CLK_SPDIF_IN_SYNC, TEGRA30_CLK_CLK_MAX, 24000000, 0 },
{ TEGRA30_CLK_I2S0_SYNC, TEGRA30_CLK_CLK_MAX, 24000000, 0 },
{ TEGRA30_CLK_I2S1_SYNC, TEGRA30_CLK_CLK_MAX, 24000000, 0 },
--
2.29.2
\
 
 \ /
  Last update: 2021-03-02 17:10    [W:0.073 / U:11.444 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site