lkml.org 
[lkml]   [2021]   [Mar]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [RFC PATCH 7/8] dt-bindings: Add bindings documentation for RISC-V idle states
On Sun, Mar 7, 2021 at 8:18 PM Anup Patel <anup@brainfault.org> wrote:
>
> On Sat, Mar 6, 2021 at 4:52 AM Rob Herring <robh@kernel.org> wrote:
> >
> > On Sun, Feb 21, 2021 at 03:07:57PM +0530, Anup Patel wrote:
> > > The RISC-V CPU idle states will be described in DT under the
> > > /cpus/riscv-idle-states DT node. This patch adds the bindings
> > > documentation for riscv-idle-states DT nodes and idle state DT
> > > nodes under it.
> > >
> > > Signed-off-by: Anup Patel <anup.patel@wdc.com>
> > > ---
> > > .../bindings/riscv/idle-states.yaml | 250 ++++++++++++++++++
> > > 1 file changed, 250 insertions(+)
> > > create mode 100644 Documentation/devicetree/bindings/riscv/idle-states.yaml
> > >
> > > diff --git a/Documentation/devicetree/bindings/riscv/idle-states.yaml b/Documentation/devicetree/bindings/riscv/idle-states.yaml
> > > new file mode 100644
> > > index 000000000000..3eff763fed23
> > > --- /dev/null
> > > +++ b/Documentation/devicetree/bindings/riscv/idle-states.yaml
> > > @@ -0,0 +1,250 @@
> > > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> > > +%YAML 1.2
> > > +---
> > > +$id: http://devicetree.org/schemas/riscv/idle-states.yaml#
> > > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > > +
> > > +title: RISC-V idle states binding description
> > > +
> > > +maintainers:
> > > + - Anup Patel <anup.patel@wdc.com>
> > > +
> > > +description: |+
> > > + RISC-V systems can manage power consumption dynamically, where HARTs
> > > + (or CPUs) [1] can be put in different platform specific suspend (or
> > > + idle) states (ranging from simple WFI, power gating, etc). The RISC-V
> > > + SBI [2] hart state management extension provides a standard mechanism
> > > + for OSes to request HART state transitions.
> > > +
> > > + The platform specific suspend (or idle) states of a hart can be either
> > > + retentive or non-rententive in nature. A retentive suspend state will
> > > + preserve hart register and CSR values for all privilege modes whereas
> > > + a non-retentive suspend state will not preserve hart register and CSR
> > > + values. The suspend (or idle) state entered by executing the WFI
> > > + instruction is considered standard on all RISC-V systems and therefore
> > > + must not be listed in device tree.
> > > +
> > > + The device tree binding definition for RISC-V idle states described
> > > + in this document is quite similar to the ARM idle states [3].
> > > +
> > > + References
> > > +
> > > + [1] RISC-V Linux Kernel documentation - CPUs bindings
> > > + Documentation/devicetree/bindings/riscv/cpus.yaml
> > > +
> > > + [2] RISC-V Supervisor Binary Interface (SBI)
> > > + http://github.com/riscv/riscv-sbi-doc/riscv-sbi.adoc
> > > +
> > > + [3] ARM idle states binding description - Idle states bindings
> > > + Documentation/devicetree/bindings/arm/idle-states.yaml
> >
> > I'd assume there's common parts we can share.
>
> Yes, except few properties most are the same.
>
> We can have a shared DT bindings for both ARM and RISC-V but
> both architectures will always have some architecture specific details
> (or properties) which need to be documented under arch specific
> DT documentation. Is it okay if this is done as a separate series ?

No...

> > > +
> > > +properties:
> > > + $nodename:
> > > + const: riscv-idle-states
> >
> > Just 'idle-states' like Arm.
>
> I had tried "idle-states" node name but DT bindings check complaints
> conflict with ARM idle state bindings.

...and this being one reason why.

Actually, I think this can all be in 1 doc if you want. It's fine with
me if a common doc has RiscV and Arm specific properties.

> > > +
> > > +patternProperties:
> > > + "^(cpu|cluster)-":
> > > + type: object
> > > + description: |
> > > + Each state node represents an idle state description and must be
> > > + defined as follows.
> > > +
> >
> > additionalProperties: false
>
> okay, will update.
>
> >
> > > + properties:
> > > + compatible:
> > > + const: riscv,idle-state
> > > +
> > > + local-timer-stop:
> > > + description:
> > > + If present the CPU local timer control logic is lost on state
> > > + entry, otherwise it is retained.
> > > + type: boolean
> > > +
> > > + entry-latency-us:
> > > + description:
> > > + Worst case latency in microseconds required to enter the idle state.
> > > +
> > > + exit-latency-us:
> > > + description:
> > > + Worst case latency in microseconds required to exit the idle state.
> > > + The exit-latency-us duration may be guaranteed only after
> > > + entry-latency-us has passed.
> > > +
> > > + min-residency-us:
> > > + description:
> > > + Minimum residency duration in microseconds, inclusive of preparation
> > > + and entry, for this idle state to be considered worthwhile energy
> > > + wise (refer to section 2 of this document for a complete description).
> > > +
> > > + wakeup-latency-us:
> > > + description: |
> > > + Maximum delay between the signaling of a wake-up event and the CPU
> > > + being able to execute normal code again. If omitted, this is assumed
> > > + to be equal to:
> > > +
> > > + entry-latency-us + exit-latency-us
> > > +
> > > + It is important to supply this value on systems where the duration
> > > + of PREP phase (see diagram 1, section 2) is non-neglibigle. In such
> > > + systems entry-latency-us + exit-latency-us will exceed
> > > + wakeup-latency-us by this duration.
> > > +
> > > + idle-state-name:
> > > + $ref: /schemas/types.yaml#/definitions/string
> > > + description:
> > > + A string used as a descriptive name for the idle state.
> > > +
> > > + required:
> > > + - compatible
> > > + - entry-latency-us
> > > + - exit-latency-us
> > > + - min-residency-us
> > > +
> > > +additionalProperties: false
>
> I will move this up.

TBC, you need this at 2 levels. Both the idle-states node and child nodes.

Rob

\
 
 \ /
  Last update: 2021-03-16 16:55    [W:0.110 / U:4.104 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site