lkml.org 
[lkml]   [2021]   [Feb]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: AW: [PATCH v2 1/4] leds: lp50xx: add setting of default intensity from DT
From
Date
Sven,

On 2/6/21 2:14 PM, Sven Schuchmann wrote:
> Hello Dan,
>
>> Von: Jacek Anaszewski <jacek.anaszewski@gmail.com>
>> Gesendet: Freitag, 5. Februar 2021 19:37
>> Hi Pavel,
>>
>> On 2/5/21 11:23 AM, Pavel Machek wrote:
>>> Hi!
>>>
>>>>>> patternProperties:
>>>>>> "(^led-[0-9a-f]$|led)":
>>>>>> @@ -99,6 +104,7 @@ examples:
>>>>>> reg = <0x1>;
>>>>>> color = <LED_COLOR_ID_RGB>;
>>>>>> function = LED_FUNCTION_CHARGING;
>>>>>> + default-intensity = <100 0 0>;
>>
>> How will you know which array position is for which child LED?
>> I presume DT child nodes are not guaranteed to be parsed in the order
>> of declaration?
>
> I tried to fiddle this out, but it seems Jacek is right over here.
> The multi-led definition looks like this (from the documentation leds-lp50xx.yaml)
>
> multi-led@1 {
> #address-cells = <1>;
> #size-cells = <0>;
> reg = <0x1>;
> color = <LED_COLOR_ID_RGB>;
> function = LED_FUNCTION_CHARGING;
>
> led-0 {
> color = <LED_COLOR_ID_RED>;
> };
>
> led-1 {
> color = <LED_COLOR_ID_GREEN>;
> };
>
> led-2 {
> color = <LED_COLOR_ID_BLUE>;
> };
> };
>
> But it seems that the color definition of each led is ignored.
> By ignored I mean the driver does not take care which color
> is at which position. So if I change led-0 to be LED_COLOR_ID_BLUE
> and led-2 to be LED_COLOR_ID_RED nothing will change if I write
> from userspace. Could you help to clarify?
> Then it is even hard to know which led to set with default-intensity.

See Documentation/ABI/testing/sysfs-class-led-multicolor and
documentation of multi_index and multi_intensity files.
It is the multi_index file that tells what is the order of colors
in the multi_intensity file.

And that depends on the order of enumeration of the nodes by DT parser.

> Also it seems that the enumeration of the multi-leds should
> start with multi-led@0 (and not 1 as in the documentation).

The @unit-address part of node name must match the first address
specified in the reg property of the node, so this is correct.
--
Best regards,
Jacek Anaszewski

\
 
 \ /
  Last update: 2021-02-06 22:01    [W:0.087 / U:6.904 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site