lkml.org 
[lkml]   [2021]   [Feb]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2 25/25] arm64: apple: Add initial Mac Mini 2020 (M1) devicetree
On Sun, Feb 21, 2021 at 11:43:52PM +0900, Hector Martin wrote:
> On 16/02/2021 04.29, Krzysztof Kozlowski wrote:
> > On Mon, Feb 15, 2021 at 09:17:13PM +0900, Hector Martin wrote:
> > > + memory@800000000 {
> > > + device_type = "memory";
> > > + reg = <0 0 0 0>; /* To be filled by loader */
> >
> > dtc and dtschema might complain, so could you set here fake memory
> > address 0x800000000? Would that work for your bootloader?
>
> Yeah, the bootloader just replaces the entire property anyway. I'll fill in
> some dummy values (the real usable memory range is to some extent dynamic
> and depends on firmware).
>
> > > + };
> > > +};
> > > +
> > > +&serial0 {
> > > + status = "okay";
> > > +};
> > > diff --git a/arch/arm64/boot/dts/apple/apple-m1.dtsi b/arch/arm64/boot/dts/apple/apple-m1.dtsi
> > > new file mode 100644
> > > index 000000000000..45c87771b057
> > > --- /dev/null
> > > +++ b/arch/arm64/boot/dts/apple/apple-m1.dtsi
> > > @@ -0,0 +1,124 @@
> > > +// SPDX-License-Identifier: GPL-2.0+ OR MIT
> > > +/*
> > > + * Copyright The Asahi Linux Contributors
> > > + */
> > > +
> > > +#include <dt-bindings/interrupt-controller/apple-aic.h>
> > > +#include <dt-bindings/interrupt-controller/irq.h>
> > > +
> > > +/ {
> > > + compatible = "apple,m1", "apple,arm-platform";
> > > +
> > > + #address-cells = <2>;
> > > + #size-cells = <2>;
> > > +
> > > + cpus {
> > > + #address-cells = <2>;
> > > + #size-cells = <0>;
> > > +
> > > + cpu0: cpu@0 {
> > > + compatible = "apple,icestorm";
> > > + device_type = "cpu";
> > > + reg = <0x0 0x0>;
> > > + enable-method = "spin-table";
> > > + cpu-release-addr = <0 0>; /* To be filled by loader */
> > > + };
> >
> > New line after every device node, please.
>
> Added newlines after all the CPU nodes.
>
> > With this minor changes, fine for me:
> > Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
>
> Thanks!
>
> v3 will rename this file to apple/t8103.dtsi and the board file to
> t8103-j274.dts to better match other platforms (and to use the proper SoC ID
> for the M1); please let me know if you're okay keeping the Reviewed-by for
> that.

It's fine, keep my review tag.

Best regards,
Krzysztof

\
 
 \ /
  Last update: 2021-02-21 16:34    [W:0.095 / U:0.112 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site