lkml.org 
[lkml]   [2021]   [Feb]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [Patch v3 net-next 6/7] octeontx2-pf: ethtool physical link status
On Sun, 31 Jan 2021 18:41:04 +0530 Hariprasad Kelam wrote:
> From: Christina Jacob <cjacob@marvell.com>
>
> Register get_link_ksettings callback to get link status information
> from the driver. As virtual function (vf) shares same physical link
> same API is used for both the drivers and for loop back drivers
> simply returns the fixed values as its does not have physical link.
>
> ethtool eth3
> Settings for eth3:
> Supported ports: [ ]
> Supported link modes: 10baseT/Half 10baseT/Full
> 100baseT/Half 100baseT/Full
> 1000baseT/Half 1000baseT/Full
> 10000baseKR/Full
> 1000baseX/Full
> Supports auto-negotiation: No
> Supported FEC modes: BaseR RS
> Advertised link modes: Not reported
> Advertised pause frame use: No
> Advertised auto-negotiation: No
> Advertised FEC modes: None
>
> ethtool lbk0
> Settings for lbk0:
> Speed: 100000Mb/s
> Duplex: Full
>
> Signed-off-by: Christina Jacob <cjacob@marvell.com>
> Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
> Signed-off-by: Hariprasad Kelam <hkelam@marvell.com>
> ---
> .../ethernet/marvell/octeontx2/nic/otx2_ethtool.c | 151 +++++++++++++++++++++
> 1 file changed, 151 insertions(+)
>
> diff --git a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_ethtool.c b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_ethtool.c
> index e5b1a57..d637815 100644
> --- a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_ethtool.c
> +++ b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_ethtool.c
> @@ -14,6 +14,7 @@
> #include <linux/etherdevice.h>
> #include <linux/log2.h>
> #include <linux/net_tstamp.h>
> +#include <linux/linkmode.h>
>
> #include "otx2_common.h"
> #include "otx2_ptp.h"
> @@ -32,6 +33,24 @@ struct otx2_stat {
> .index = offsetof(struct otx2_dev_stats, stat) / sizeof(u64), \
> }
>
> +/* Physical link config */
> +#define OTX2_ETHTOOL_SUPPORTED_MODES 0x638CCBF //110001110001100110010111111
> +#define OTX2_RESERVED_ETHTOOL_LINK_MODE 0

Just use 0 directly in the code.

> +static const int otx2_sgmii_features_array[6] = {
> + ETHTOOL_LINK_MODE_10baseT_Half_BIT,
> + ETHTOOL_LINK_MODE_10baseT_Full_BIT,
> + ETHTOOL_LINK_MODE_100baseT_Half_BIT,
> + ETHTOOL_LINK_MODE_100baseT_Full_BIT,
> + ETHTOOL_LINK_MODE_1000baseT_Half_BIT,
> + ETHTOOL_LINK_MODE_1000baseT_Full_BIT,
> +};

Why is this one up at the top of the file but other arrays are not?
It seems to be used only in once function.

> +enum link_mode {
> + OTX2_MODE_SUPPORTED,
> + OTX2_MODE_ADVERTISED
> +};
> +
> static const struct otx2_stat otx2_dev_stats[] = {
> OTX2_DEV_STAT(rx_ucast_frames),
> OTX2_DEV_STAT(rx_bcast_frames),
> @@ -1034,6 +1053,123 @@ static int otx2_set_fecparam(struct net_device *netdev,
> return err;
> }
>
> +static void otx2_get_fec_info(u64 index, int req_mode,
> + struct ethtool_link_ksettings *link_ksettings)
> +{
> + __ETHTOOL_DECLARE_LINK_MODE_MASK(otx2_fec_modes) = { 0, };
> +
> + switch (index) {
> + case OTX2_FEC_NONE:
> + linkmode_set_bit(ETHTOOL_LINK_MODE_FEC_NONE_BIT, otx2_fec_modes);
> + break;
> + case OTX2_FEC_BASER:
> + linkmode_set_bit(ETHTOOL_LINK_MODE_FEC_BASER_BIT, otx2_fec_modes);
> + break;
> + case OTX2_FEC_RS:
> + linkmode_set_bit(ETHTOOL_LINK_MODE_FEC_RS_BIT, otx2_fec_modes);
> + break;
> + case OTX2_FEC_BASER | OTX2_FEC_RS:
> + linkmode_set_bit(ETHTOOL_LINK_MODE_FEC_BASER_BIT, otx2_fec_modes);
> + linkmode_set_bit(ETHTOOL_LINK_MODE_FEC_RS_BIT, otx2_fec_modes);
> + break;
> + }
> +
> + /* Add fec modes to existing modes */
> + if (req_mode == OTX2_MODE_ADVERTISED)
> + linkmode_or(link_ksettings->link_modes.advertising,
> + link_ksettings->link_modes.advertising,
> + otx2_fec_modes);
> + else
> + linkmode_or(link_ksettings->link_modes.supported,
> + link_ksettings->link_modes.supported,
> + otx2_fec_modes);
> +}
> +
> +static void otx2_get_link_mode_info(u64 link_mode_bmap,
> + bool req_mode,
> + struct ethtool_link_ksettings
> + *link_ksettings)
> +{
> + __ETHTOOL_DECLARE_LINK_MODE_MASK(otx2_link_modes) = { 0, };
> + u8 bit;
> +

No empty lines in the middle of variable declarations.

> + /* CGX link modes to Ethtool link mode mapping */
> + const int cgx_link_mode[27] = {
> + 0, /* SGMII Mode */
> + ETHTOOL_LINK_MODE_1000baseX_Full_BIT,
> + ETHTOOL_LINK_MODE_10000baseT_Full_BIT,
> + ETHTOOL_LINK_MODE_10000baseSR_Full_BIT,
> + ETHTOOL_LINK_MODE_10000baseLR_Full_BIT,
> + ETHTOOL_LINK_MODE_10000baseKR_Full_BIT,
> + OTX2_RESERVED_ETHTOOL_LINK_MODE,
> + ETHTOOL_LINK_MODE_25000baseSR_Full_BIT,
> + OTX2_RESERVED_ETHTOOL_LINK_MODE,
> + OTX2_RESERVED_ETHTOOL_LINK_MODE,
> + ETHTOOL_LINK_MODE_25000baseCR_Full_BIT,
> + ETHTOOL_LINK_MODE_25000baseKR_Full_BIT,
> + ETHTOOL_LINK_MODE_40000baseSR4_Full_BIT,
> + ETHTOOL_LINK_MODE_40000baseLR4_Full_BIT,
> + ETHTOOL_LINK_MODE_40000baseCR4_Full_BIT,
> + ETHTOOL_LINK_MODE_40000baseKR4_Full_BIT,
> + OTX2_RESERVED_ETHTOOL_LINK_MODE,
> + ETHTOOL_LINK_MODE_50000baseSR_Full_BIT,
> + OTX2_RESERVED_ETHTOOL_LINK_MODE,
> + ETHTOOL_LINK_MODE_50000baseLR_ER_FR_Full_BIT,
> + ETHTOOL_LINK_MODE_50000baseCR_Full_BIT,
> + ETHTOOL_LINK_MODE_50000baseKR_Full_BIT,
> + OTX2_RESERVED_ETHTOOL_LINK_MODE,
> + ETHTOOL_LINK_MODE_100000baseSR4_Full_BIT,
> + ETHTOOL_LINK_MODE_100000baseLR4_ER4_Full_BIT,
> + ETHTOOL_LINK_MODE_100000baseCR4_Full_BIT,
> + ETHTOOL_LINK_MODE_100000baseKR4_Full_BIT
> + };
> +
> + link_mode_bmap = link_mode_bmap & OTX2_ETHTOOL_SUPPORTED_MODES;
> +
> + for_each_set_bit(bit, (unsigned long *)&link_mode_bmap, 27) {
> + /* SGMII mode is set */
> + if (bit == 0)

Double spaces x2

> + linkmode_set_bit_array(otx2_sgmii_features_array,
> + ARRAY_SIZE(otx2_sgmii_features_array),
> + otx2_link_modes);
> + else
> + linkmode_set_bit(cgx_link_mode[bit], otx2_link_modes);
> + }
> +
> + if (req_mode == OTX2_MODE_ADVERTISED)
> + linkmode_copy(link_ksettings->link_modes.advertising, otx2_link_modes);
> + else
> + linkmode_copy(link_ksettings->link_modes.supported, otx2_link_modes);
> +}

> + otx2_get_link_mode_info(rsp->fwdata.advertised_link_modes, OTX2_MODE_ADVERTISED, cmd);
> + otx2_get_fec_info(rsp->fwdata.advertised_fec, OTX2_MODE_ADVERTISED, cmd);
> +
> + otx2_get_link_mode_info(rsp->fwdata.supported_link_modes, OTX2_MODE_SUPPORTED, cmd);
> + otx2_get_fec_info(rsp->fwdata.supported_fec, OTX2_MODE_SUPPORTED, cmd);

Wrap those lines please.

> + return 0;
> +}

> +static int otx2vf_get_link_ksettings(struct net_device *netdev,
> + struct ethtool_link_ksettings *cmd)
> +{
> + struct otx2_nic *pfvf = netdev_priv(netdev);
> +
> + if (is_otx2_lbkvf(pfvf->pdev)) {
> + cmd->base.duplex = DUPLEX_FULL;
> + cmd->base.speed = SPEED_100000;
> + } else {
> + return otx2_get_link_ksettings(netdev, cmd);

Double space

\
 
 \ /
  Last update: 2021-02-03 02:25    [W:0.112 / U:0.028 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site