lkml.org 
[lkml]   [2021]   [Feb]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[GIT PULL] thermal for v5.12-rc1
Date

Hi Linus,

please consider pulling these thermal changes for v5.12-rc1

Note a set of changes for the qcom adc driver rely on an immutable
branch from the iio tree:
https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio.git/log/?h=ib-iio-thermal-5.11-rc1


The following changes since commit e71ba9452f0b5b2e8dc8aa5445198cd9214a6a62:

Linux 5.11-rc2 (2021-01-03 15:55:30 -0800)

are available in the Git repository at:


ssh://git@gitolite.kernel.org/pub/scm/linux/kernel/git/thermal/linux.git
tags/thermal-v5.12-rc1

for you to fetch changes up to a51afb13311cd85b2f638c691b2734622277d8f5:

thermal: cpufreq_cooling: freq_qos_update_request() returns < 0 on
error (2021-02-17 18:53:19 +0100)

----------------------------------------------------------------
- Use the newly introduced 'hot' and 'critical' ops for the acpi
thermal driver (Daniel Lezcano)

- Remove the notify ops as it is no longer used (Daniel Lezcano)

- Remove the 'forced passive' option and the unused bind/unbind
functions (Daniel Lezcano)

- Remove the THERMAL_TRIPS_NONE and the code cleanup around this
macro (Daniel Lezcano)

- Rework the delays to make them pre-computed instead of computing
them again and again at each polling interval (Daniel Lezcano)

- Remove the pointless 'thermal_zone_device_reset' function (Daniel
Lezcano)

- Use the critical and hot ops to prevent an unexpected system
shutdown on int340x (Kai-Heng Feng)

- Make the cooling device state private to the thermal subsystem
(Daniel Lezcano)

- Prevent to use not-power-aware actor devices with the power
allocator governor (Lukasz Luba)

- Remove 'zx' and 'tango' support along with the corresponding
platforms (Arnd Bergman)

- Fix several issues on the Omap thermal driver (Tony Lindgren)

- Add support for adc-tm5 PMIC thermal monitor for Qcom
platforms. Please note those changes rely on an immutable branch:
iio-thermal-5.11-rc1/ib-iio-thermal-5.11-rc1 from the iio tree
(Dmitry Baryshkov)

- Fix an initialization loop in the adc-tm5 (Colin Ian King)

- Fix a return error check in the cpufreq cooling device (Viresh Kumar)

----------------------------------------------------------------
Arnd Bergmann (2):
thermal/drivers/tango: Remove tango driver
thermal/drivers/zx: Remove zx driver

Colin Ian King (1):
thermal: qcom: Fix comparison with uninitialized variable
channels_available

Craig Tatlor (1):
fixp-arith: add a linear interpolation function

Daniel Lezcano (14):
thermal/drivers/acpi: Use hot and critical ops
thermal/core: Remove notify ops
thermal/core: Remove the 'forced_passive' option
thermal/core: Remove unused functions rebind/unbind exception
thermal/core: Remove pointless test with the THERMAL_TRIPS_NONE macro
acpi/drivers/thermal: Remove TRIPS_NONE cooling device binding
thermal/core: Remove THERMAL_TRIPS_NONE test
thermal/core: Remove unused macro THERMAL_TRIPS_NONE
thermal/core: Precompute the delays from msecs to jiffies
thermal/core: Use precomputed jiffies for the polling
thermal/core: Remove ms based delay fields
thermal/core: Remove pointless thermal_zone_device_reset() function
thermal/core: Make cooling device state change private
Merge remote-tracking branch
'iio-thermal-5.11-rc1/ib-iio-thermal-5.11-rc1' into testing

Dmitry Baryshkov (11):
iio: adc: qcom-vadc: move several adc5 functions to common file
iio: adc: qcom-vadc-common: use fixp_linear_interpolate
iio: adc: move qcom-vadc-common.h to include dir
iio: adc: qcom-spmi-adc5: use of_device_get_match_data
iio: provide of_iio_channel_get_by_name() and devm_ version it
iio: adc: move vadc_map_pt from header to the source file
iio: adc: qcom-vadc-common: rewrite vadc7 die temp calculation
iio: adc: qcom-vadc-common: simplify qcom_vadc_map_voltage_temp
iio: adc: qcom-vadc-common: scale adcmap_100k_104ef_104fb
dt-bindings: thermal: qcom: add adc-thermal monitor bindings
thermal: qcom: add support for adc-tm5 PMIC thermal monitor

Kai-Heng Feng (2):
thermal: int340x: Fix unexpected shutdown at critical temperature
thermal: intel: pch: Fix unexpected shutdown at critical temperature

Lukasz Luba (1):
thermal: power allocator: fail binding for non-power actor devices

Tony Lindgren (4):
thermal: ti-soc-thermal: Skip pointless register access for dra7
thermal: ti-soc-thermal: Fix stuck sensor with continuous mode for
4430
thermal: ti-soc-thermal: Simplify polling with iopoll
thermal: ti-soc-thermal: Use non-inverted define for omap4

Viresh Kumar (1):
thermal: cpufreq_cooling: freq_qos_update_request() returns < 0 on
error

.../bindings/thermal/qcom-spmi-adc-tm5.yaml | 153 +++++
.../devicetree/bindings/thermal/tango-thermal.txt | 17 -
.../devicetree/bindings/thermal/zx2967-thermal.txt | 116 ----
Documentation/driver-api/thermal/sysfs-api.rst | 13 -
drivers/acpi/thermal.c | 49 +-
drivers/hwmon/pwm-fan.c | 1 -
drivers/iio/adc/qcom-pm8xxx-xoadc.c | 3 +-
drivers/iio/adc/qcom-spmi-adc5.c | 95 +---
drivers/iio/adc/qcom-spmi-vadc.c | 3 +-
drivers/iio/adc/qcom-vadc-common.c | 279 +++++----
drivers/iio/inkern.c | 34 +-
drivers/platform/x86/acerhdf.c | 3 +-
drivers/thermal/Kconfig | 17 -
drivers/thermal/Makefile | 2 -
drivers/thermal/cpufreq_cooling.c | 2 +-
drivers/thermal/da9062-thermal.c | 4 +-
drivers/thermal/gov_power_allocator.c | 37 +-
drivers/thermal/gov_step_wise.c | 14 +-
.../intel/int340x_thermal/int340x_thermal_zone.c | 6 +
drivers/thermal/intel/intel_pch_thermal.c | 6 +
drivers/thermal/khadas_mcu_fan.c | 1 -
drivers/thermal/qcom/Kconfig | 11 +
drivers/thermal/qcom/Makefile | 1 +
drivers/thermal/qcom/qcom-spmi-adc-tm5.c | 623
+++++++++++++++++++++
drivers/thermal/tango_thermal.c | 126 -----
drivers/thermal/thermal_core.c | 72 +--
drivers/thermal/thermal_core.h | 7 +-
drivers/thermal/thermal_helpers.c | 7 +
drivers/thermal/thermal_sysfs.c | 85 +--
.../thermal/ti-soc-thermal/omap4-thermal-data.c | 7 +-
drivers/thermal/ti-soc-thermal/omap4xxx-bandgap.h | 4 +-
drivers/thermal/ti-soc-thermal/ti-bandgap.c | 54 +-
drivers/thermal/ti-soc-thermal/ti-bandgap.h | 2 +
drivers/thermal/ti-soc-thermal/ti-thermal-common.c | 6 +-
drivers/thermal/zx2967_thermal.c | 256 ---------
include/linux/fixp-arith.h | 19 +
.../linux}/iio/adc/qcom-vadc-common.h | 31 +-
include/linux/iio/consumer.h | 36 ++
include/linux/thermal.h | 18 +-
39 files changed, 1218 insertions(+), 1002 deletions(-)
create mode 100644
Documentation/devicetree/bindings/thermal/qcom-spmi-adc-tm5.yaml
delete mode 100644
Documentation/devicetree/bindings/thermal/tango-thermal.txt
delete mode 100644
Documentation/devicetree/bindings/thermal/zx2967-thermal.txt
create mode 100644 drivers/thermal/qcom/qcom-spmi-adc-tm5.c
delete mode 100644 drivers/thermal/tango_thermal.c
delete mode 100644 drivers/thermal/zx2967_thermal.c
rename {drivers => include/linux}/iio/adc/qcom-vadc-common.h (92%)

--
<http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs

Follow Linaro: <http://www.facebook.com/pages/Linaro> Facebook |
<http://twitter.com/#!/linaroorg> Twitter |
<http://www.linaro.org/linaro-blog/> Blog

\
 
 \ /
  Last update: 2021-02-19 12:57    [W:0.060 / U:1.432 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site