lkml.org 
[lkml]   [2021]   [Feb]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH net-next v2 1/3] net: phy: broadcom: Avoid forward for bcm54xx_config_clock_delay()
Date
Avoid a forward declaration by moving the callers of
bcm54xx_config_clock_delay() below its body.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
drivers/net/phy/broadcom.c | 74 +++++++++++++++++++-------------------
1 file changed, 36 insertions(+), 38 deletions(-)

diff --git a/drivers/net/phy/broadcom.c b/drivers/net/phy/broadcom.c
index 0472b3470c59..4142f69c1530 100644
--- a/drivers/net/phy/broadcom.c
+++ b/drivers/net/phy/broadcom.c
@@ -26,44 +26,6 @@ MODULE_DESCRIPTION("Broadcom PHY driver");
MODULE_AUTHOR("Maciej W. Rozycki");
MODULE_LICENSE("GPL");

-static int bcm54xx_config_clock_delay(struct phy_device *phydev);
-
-static int bcm54210e_config_init(struct phy_device *phydev)
-{
- int val;
-
- bcm54xx_config_clock_delay(phydev);
-
- if (phydev->dev_flags & PHY_BRCM_EN_MASTER_MODE) {
- val = phy_read(phydev, MII_CTRL1000);
- val |= CTL1000_AS_MASTER | CTL1000_ENABLE_MASTER;
- phy_write(phydev, MII_CTRL1000, val);
- }
-
- return 0;
-}
-
-static int bcm54612e_config_init(struct phy_device *phydev)
-{
- int reg;
-
- bcm54xx_config_clock_delay(phydev);
-
- /* Enable CLK125 MUX on LED4 if ref clock is enabled. */
- if (!(phydev->dev_flags & PHY_BRCM_RX_REFCLK_UNUSED)) {
- int err;
-
- reg = bcm_phy_read_exp(phydev, BCM54612E_EXP_SPARE0);
- err = bcm_phy_write_exp(phydev, BCM54612E_EXP_SPARE0,
- BCM54612E_LED4_CLK125OUT_EN | reg);
-
- if (err < 0)
- return err;
- }
-
- return 0;
-}
-
static int bcm54xx_config_clock_delay(struct phy_device *phydev)
{
int rc, val;
@@ -105,6 +67,42 @@ static int bcm54xx_config_clock_delay(struct phy_device *phydev)
return 0;
}

+static int bcm54210e_config_init(struct phy_device *phydev)
+{
+ int val;
+
+ bcm54xx_config_clock_delay(phydev);
+
+ if (phydev->dev_flags & PHY_BRCM_EN_MASTER_MODE) {
+ val = phy_read(phydev, MII_CTRL1000);
+ val |= CTL1000_AS_MASTER | CTL1000_ENABLE_MASTER;
+ phy_write(phydev, MII_CTRL1000, val);
+ }
+
+ return 0;
+}
+
+static int bcm54612e_config_init(struct phy_device *phydev)
+{
+ int reg;
+
+ bcm54xx_config_clock_delay(phydev);
+
+ /* Enable CLK125 MUX on LED4 if ref clock is enabled. */
+ if (!(phydev->dev_flags & PHY_BRCM_RX_REFCLK_UNUSED)) {
+ int err;
+
+ reg = bcm_phy_read_exp(phydev, BCM54612E_EXP_SPARE0);
+ err = bcm_phy_write_exp(phydev, BCM54612E_EXP_SPARE0,
+ BCM54612E_LED4_CLK125OUT_EN | reg);
+
+ if (err < 0)
+ return err;
+ }
+
+ return 0;
+}
+
/* Needs SMDSP clock enabled via bcm54xx_phydsp_config() */
static int bcm50610_a0_workaround(struct phy_device *phydev)
{
--
2.25.1
\
 
 \ /
  Last update: 2021-02-13 04:50    [W:0.151 / U:2.468 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site