lkml.org 
[lkml]   [2021]   [Feb]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH V1 1/3] scsi: ufs: export api for use in vendor file
On 2021-01-31 19:29, Avri Altman wrote:
>>
>> Exporting functions ufshcd_set_dev_pwr_mode, ufshcd_disable_vreg
>> and ufshcd_enable_vreg so that vendor drivers can make use of
>> them in setting vendor specific regulator setting
>> in vendor specific file.
> As for ufshcd_{enable,disable}_vreg - maybe inline ufshcd_toggle_vreg
> and use it instead?
>
>>
>> Signed-off-by: Nitin Rawat <nitirawa@codeaurora.org>
>> Signed-off-by: Bao D. Nguyen <nguyenb@codeaurora.org>
>> Signed-off-by: Veerabhadrarao Badiganti <vbadigan@codeaurora.org>
>> ---
>> drivers/scsi/ufs/ufshcd.c | 9 ++++++---
>> drivers/scsi/ufs/ufshcd.h | 4 ++++
>> 2 files changed, 10 insertions(+), 3 deletions(-)
>>
>> diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c
>> index 9c691e4..000a03a 100644
>> --- a/drivers/scsi/ufs/ufshcd.c
>> +++ b/drivers/scsi/ufs/ufshcd.c
>> @@ -8091,7 +8091,7 @@ static int ufshcd_config_vreg(struct device
>> *dev,
>> return ret;
>> }
>>
>> -static int ufshcd_enable_vreg(struct device *dev, struct ufs_vreg
>> *vreg)
>> +int ufshcd_enable_vreg(struct device *dev, struct ufs_vreg *vreg)
>> {
>> int ret = 0;
>>
>> @@ -8110,8 +8110,9 @@ static int ufshcd_enable_vreg(struct device
>> *dev,
>> struct ufs_vreg *vreg)
>> out:
>> return ret;
>> }
>> +EXPORT_SYMBOL(ufshcd_enable_vreg);
> Why do you need to export it across the kernel?
> Isn't making it non-static suffices?
> Do you need it for a loadable module?
>
>>
>> -static int ufshcd_disable_vreg(struct device *dev, struct ufs_vreg
>> *vreg)
>> +int ufshcd_disable_vreg(struct device *dev, struct ufs_vreg *vreg)
>> {
>> int ret = 0;
>>
>> @@ -8131,6 +8132,7 @@ static int ufshcd_disable_vreg(struct device
>> *dev,
>> struct ufs_vreg *vreg)
>> out:
>> return ret;
>> }
>> +EXPORT_SYMBOL(ufshcd_disable_vreg);
>>
>> static int ufshcd_setup_vreg(struct ufs_hba *hba, bool on)
>> {
>> @@ -8455,7 +8457,7 @@ ufshcd_send_request_sense(struct ufs_hba *hba,
>> struct scsi_device *sdp)
>> * Returns 0 if requested power mode is set successfully
>> * Returns non-zero if failed to set the requested power mode
>> */
>> -static int ufshcd_set_dev_pwr_mode(struct ufs_hba *hba,
>> +int ufshcd_set_dev_pwr_mode(struct ufs_hba *hba,
>> enum ufs_dev_pwr_mode pwr_mode)
>> {
>> unsigned char cmd[6] = { START_STOP };
>> @@ -8513,6 +8515,7 @@ static int ufshcd_set_dev_pwr_mode(struct
>> ufs_hba
>> *hba,
>> hba->host->eh_noresume = 0;
>> return ret;
>> }
>> +EXPORT_SYMBOL(ufshcd_set_dev_pwr_mode);
>>
>> static int ufshcd_link_state_transition(struct ufs_hba *hba,
>> enum uic_link_state
>> req_link_state,
>> diff --git a/drivers/scsi/ufs/ufshcd.h b/drivers/scsi/ufs/ufshcd.h
>> index ee61f82..1410c95 100644
>> --- a/drivers/scsi/ufs/ufshcd.h
>> +++ b/drivers/scsi/ufs/ufshcd.h
>> @@ -997,6 +997,10 @@ extern int ufshcd_dme_get_attr(struct ufs_hba
>> *hba,
>> u32 attr_sel,
>> u32 *mib_val, u8 peer);
>> extern int ufshcd_config_pwr_mode(struct ufs_hba *hba,
>> struct ufs_pa_layer_attr *desired_pwr_mode);
>> +extern int ufshcd_set_dev_pwr_mode(struct ufs_hba *hba,
>> + enum ufs_dev_pwr_mode
>> pwr_mode);
>> +extern int ufshcd_enable_vreg(struct device *dev, struct ufs_vreg
>> *vreg);
>> +extern int ufshcd_disable_vreg(struct device *dev, struct ufs_vreg
>> *vreg);
>>
>> /* UIC command interfaces for DME primitives */
>> #define DME_LOCAL 0
>> --
>> 2.7.4

Hi Avri,
Thanks for reviewing it.
ufs-qcom.c can be a loadable module, so just inlining won't suffice in
that case.
Hence export is needed.

Thanks,
Nitin

\
 
 \ /
  Last update: 2021-02-01 09:13    [W:0.117 / U:2.144 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site