lkml.org 
[lkml]   [2021]   [Dec]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH 2/4] ACPI: PM: Remove redundant cache flushing
On Mon, Dec 6, 2021 at 1:30 PM Kirill A. Shutemov
<kirill.shutemov@linux.intel.com> wrote:
>
> ACPICA code takes care about cache flushing on S1/S2/S3 in
> acpi_hw_extended_sleep() and acpi_hw_legacy_sleep().
>
> acpi_suspend_enter() calls into ACPICA code via acpi_enter_sleep_state()
> for S1 or x86_acpi_suspend_lowlevel() for S3. It only need to flush
> cache for S2 (not sure if this call path is ever used for S2).
>
> acpi_sleep_prepare() call tree:
> __acpi_pm_prepare()
> acpi_pm_prepare()
> acpi_suspend_ops::prepare_late()
> acpi_hibernation_ops::pre_snapshot()
> acpi_hibernation_ops::prepare()
> acpi_suspend_begin_old()
> acpi_suspend_begin_old::begin()
> acpi_hibernation_begin_old()
> acpi_hibernation_ops_old::acpi_hibernation_begin_old()
> acpi_power_off_prepare()
> pm_power_off_prepare()
>
> Hibernation (S4) and Power Off (S5) don't require cache flushing. So,
> the only interesting callsites are acpi_suspend_ops::prepare_late() and
> acpi_suspend_begin_old::begin(). Both of them have cache flush on
> ->enter() operation in acpi_suspend_enter().
>
> Remove redundant ACPI_FLUSH_CPU_CACHE() in acpi_sleep_prepare() and
> acpi_suspend_enter().
>
> Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
> ---
> drivers/acpi/sleep.c | 7 +++----
> 1 file changed, 3 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/acpi/sleep.c b/drivers/acpi/sleep.c
> index eaa47753b758..14e8df0ac762 100644
> --- a/drivers/acpi/sleep.c
> +++ b/drivers/acpi/sleep.c
> @@ -73,7 +73,6 @@ static int acpi_sleep_prepare(u32 acpi_state)
> acpi_set_waking_vector(acpi_wakeup_address);
>
> }
> - ACPI_FLUSH_CPU_CACHE();
> #endif
> pr_info("Preparing to enter system sleep state S%d\n", acpi_state);
> acpi_enable_wakeup_devices(acpi_state);
> @@ -566,15 +565,15 @@ static int acpi_suspend_enter(suspend_state_t pm_state)
> u32 acpi_state = acpi_target_sleep_state;
> int error;
>
> - ACPI_FLUSH_CPU_CACHE();
> -
> trace_suspend_resume(TPS("acpi_suspend"), acpi_state, true);
> switch (acpi_state) {
> case ACPI_STATE_S1:
> barrier();
> status = acpi_enter_sleep_state(acpi_state);
> break;
> -
> + case ACPI_STATE_S2:
> + ACPI_FLUSH_CPU_CACHE();
> + break;

I don't think this is needed for S2, because the function doesn't do
anything low-level in that case and simply returns (IOW, S2 isn't
really supported).

> case ACPI_STATE_S3:
> if (!acpi_suspend_lowlevel)
> return -ENOSYS;
> --
> 2.32.0
>

\
 
 \ /
  Last update: 2021-12-07 17:36    [W:0.160 / U:1.516 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site