lkml.org 
[lkml]   [2021]   [Dec]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH v9 3/3] iio: addac: add AD74413R driver
From

On 12/4/21 19:41, Jonathan Cameron wrote:
> On Fri, 3 Dec 2021 01:25:07 +0200
> Cosmin Tanislav <demonsingur@gmail.com> wrote:
>
>> The AD74412R and AD74413R are quad-channel, software configurable,
>> input/output solutions for building and process control applications.
>>
>> They contain functionality for analog output, analog input, digital input,
>> resistance temperature detector, and thermocouple measurements integrated
>> into a single chip solution with an SPI interface.
>>
>> The devices feature a 16-bit ADC and four configurable 13-bit DACs to
>> provide four configurable input/output channels and a suite of diagnostic
>> functions.
>>
>> The AD74413R differentiates itself from the AD74412R by being
>> HART-compatible.
>>
>> When configured with channel 0 as voltage output, channel 1 as current
>> output, channel 2 as voltage input and channel 3 as current input, the
>> following structure is created under the corresponding IIO device.
>>
>> .
>> ├── in_current0_offset
>> ├── in_current0_raw
>> ├── in_current0_sampling_frequency
>> ├── in_current0_sampling_frequency_available
>> ├── in_current0_scale
>> ├── in_voltage1_offset
>> ├── in_voltage1_raw
>> ├── in_voltage1_sampling_frequency
>> ├── in_voltage1_sampling_frequency_available
>> ├── in_voltage1_scale
>> ├── in_voltage2_offset
>> ├── in_voltage2_raw
>> ├── in_voltage2_sampling_frequency
>> ├── in_voltage2_sampling_frequency_available
>> ├── in_voltage2_scale
>> ├── in_current3_offset
>> ├── in_current3_raw
>> ├── in_current3_sampling_frequency
>> ├── in_current3_sampling_frequency_available
>> ├── in_current3_scale
>> ├── out_voltage0_raw
>> ├── out_voltage0_scale
>> ├── out_current1_raw
>> ├── out_current1_scale
>> ├── name
>> ├── buffer
>> │   ├── data_available
>> │   ├── enable
>> │   ├── length
>> │   └── watermark
>> └── scan_elements
>>    ├── in_current0_en
>>    ├── in_current0_index
>>    ├── in_current0_type
>>    ├── in_voltage1_en
>>    ├── in_voltage1_index
>>    ├── in_voltage1_type
>>    ├── in_voltage2_en
>>    ├── in_voltage2_index
>>    ├── in_voltage2_type
>>    ├── in_current3_en
>>    ├── in_current3_index
>>    └── in_current3_type
>>
>> Signed-off-by: Cosmin Tanislav <cosmin.tanislav@analog.com>
> You haven't picked up Linus' tag from v7. I'm assuming that wasn't deliberate
> so please add it for v10. I think there is just enough stuff in here that it makes
> more sense for you to spin a new version than for me to fix it whilst applying...

Yes, it wasn't deliberate.


> All minor stuff so shouldn't take long hopefully + we still need a dt review
> which might take a while depending on how busy Rob is.
>
> thanks,
>
> Jonathan
>
>> ---
>> --- /dev/null
>> +++ b/drivers/iio/addac/ad74413r.c
>> @@ -0,0 +1,1476 @@
>> +// SPDX-License-Identifier: GPL-2.0
>> +/*
>> + * Copyright (C) 2021 Analog Devices, Inc.
>> + * Author: Cosmin Tanislav <cosmin.tanislav@analog.com>
>> + */
>> +
>
> ...
>
>> +struct ad74413r_state {
>> + struct ad74413r_channel_config channel_configs[AD74413R_CHANNEL_MAX];
>> + unsigned int gpo_gpio_offsets[AD74413R_CHANNEL_MAX];
>> + unsigned int comp_gpio_offsets[AD74413R_CHANNEL_MAX];
>> + struct gpio_chip gpo_gpiochip;
>> + struct gpio_chip comp_gpiochip;
>> + struct completion adc_data_completion;
>> + unsigned int num_gpo_gpios;
>> + unsigned int num_comparator_gpios;
>> + u32 sense_resistor_ohms;
>> +
>> + /*
>> + * Synchronize consecutive operations when doing a one-shot
>> + * conversion and when updating the ADC samples SPI message.
>> + */
>> + struct mutex lock;
>> +
>> + const struct ad74413r_chip_info *chip_info;
>> + struct spi_device *spi;
>> + struct regulator *refin_reg;
>> + struct regmap *regmap;
>> + struct device *dev;
>> + struct iio_trigger *trig;
>> +
>> + size_t adc_active_channels;
>> + struct spi_message adc_samples_msg;
>> + struct spi_transfer adc_samples_xfer[AD74413R_CHANNEL_MAX + 1];
>> +
>> + /*
>> + * DMA (thus cache coherency maintenance) requires the
>> + * transfer buffers to live in their own cache lines.
>> + */
>> + struct {
>> + u8 rx_buf[AD74413R_FRAME_SIZE * AD74413R_CHANNEL_MAX];
>> + s64 timestamp;
>> + } adc_samples_buf ____cacheline_aligned;
>> +
>> + u8 adc_samples_tx_buf[AD74413R_FRAME_SIZE * AD74413R_CHANNEL_MAX]
>> + ____cacheline_aligned;
> What was your thinking for needing to have both adc_samples_buf and adc_samples_tx_buf
> at force alignment? I would have expected only adc_samples_buf would be necessary,
> unless there are paths in which you are writing into one whilst DMA is going on into
> the other.. If there is a reason add a comment.
>
Sorry, this is just something I missed when removing the other extra
____cacheline_aligned.


>> + u8 reg_tx_buf[AD74413R_FRAME_SIZE];
>> + u8 reg_rx_buf[AD74413R_FRAME_SIZE];
>> +};
>> +
>> +
>> +static int ad74413r_probe(struct spi_device *spi)
>> +{
>> + struct ad74413r_state *st;
>> + struct iio_dev *indio_dev;
>> + int ret;
>> +
>> + indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*st));
>> + if (!indio_dev)
>> + return -ENOMEM;
>> +
>> + st = iio_priv(indio_dev);
>> +
>> + st->spi = spi;
>> + st->dev = &spi->dev;
>> + st->chip_info = device_get_match_data(&spi->dev);
>> + mutex_init(&st->lock);
>> + init_completion(&st->adc_data_completion);
>> +
>> + st->regmap = devm_regmap_init(st->dev, NULL, st,
>> + &ad74413r_regmap_config);
>> + if (IS_ERR(st->regmap))
>> + return PTR_ERR(st->regmap);
>> +
>> + st->refin_reg = devm_regulator_get(st->dev, "refin");
>> + if (IS_ERR(st->refin_reg))
>> + return dev_err_probe(st->dev, PTR_ERR(st->refin_reg),
>> + "Failed to get refin regulator\n");
>> +
>> + ret = regulator_enable(st->refin_reg);
>> + if (ret)
>> + return ret;
>> +
>> + ret = devm_add_action_or_reset(st->dev, ad74413r_regulator_disable,
>> + st->refin_reg);
>> + if (ret)
>> + return ret;
>> +
>> + st->sense_resistor_ohms = 100000000;
>> + device_property_read_u32(st->dev, "shunt-resistor-micro-ohms",
>> + &st->sense_resistor_ohms);
>> + st->sense_resistor_ohms /= 1000000;
>> +
>> + st->trig = devm_iio_trigger_alloc(st->dev, "%s-dev%d",
>> + st->chip_info->name, iio_device_id(indio_dev));
>> + if (!st->trig)
>> + return -ENOMEM;
>> +
>> + st->trig->ops = &ad74413r_trigger_ops;
>> + iio_trigger_set_drvdata(st->trig, st);
>> +
>> + ret = devm_iio_trigger_register(st->dev, st->trig);
>> + if (ret)
>> + return ret;
>> +
>> + indio_dev->name = st->chip_info->name;
>> + indio_dev->modes = INDIO_DIRECT_MODE;
>> + indio_dev->info = &ad74413r_info;
>> + indio_dev->trig = iio_trigger_get(st->trig);
>> +
>> + ret = ad74413r_reset(st);
>> + if (ret)
>> + return ret;
>> +
>> + ret = ad74413r_parse_channel_configs(indio_dev);
>> + if (ret)
>> + return ret;
>> +
>> + ret = ad74413r_setup_channels(indio_dev);
>> + if (ret)
>> + return ret;
>> +
>> + ret = ad74413r_setup_gpios(st);
>> + if (ret)
>> + return ret;
>> +
>> + if (st->num_gpo_gpios) {
>> + st->gpo_gpiochip.owner = THIS_MODULE;
>> + st->gpo_gpiochip.label = st->chip_info->name;
>> + st->gpo_gpiochip.base = -1;
>> + st->gpo_gpiochip.ngpio = st->num_gpo_gpios;
>> + st->gpo_gpiochip.parent = st->dev;
>> + st->gpo_gpiochip.can_sleep = true;
>> + st->gpo_gpiochip.set = ad74413r_gpio_set;
>> + st->gpo_gpiochip.set_multiple = ad74413r_gpio_set_multiple;
>> + st->gpo_gpiochip.set_config = ad74413r_gpio_set_gpo_config;
>> + st->gpo_gpiochip.get_direction =
>> + ad74413r_gpio_get_gpo_direction;
>> +
>> + ret = devm_gpiochip_add_data(st->dev, &st->gpo_gpiochip, st);
>> + if (ret)
>> + return ret;
>> + }
>> +
>> + if (st->num_comparator_gpios) {
>> + st->comp_gpiochip.owner = THIS_MODULE;
>> + st->comp_gpiochip.label = st->chip_info->name;
>> + st->comp_gpiochip.base = -1;
>> + st->comp_gpiochip.ngpio = st->num_comparator_gpios;
>> + st->comp_gpiochip.parent = st->dev;
>> + st->comp_gpiochip.can_sleep = true;
>> + st->comp_gpiochip.get = ad74413r_gpio_get;
>> + st->comp_gpiochip.get_multiple = ad74413r_gpio_get_multiple;
>> + st->comp_gpiochip.set_config = ad74413r_gpio_set_comp_config;
>> + st->comp_gpiochip.get_direction =
>> + ad74413r_gpio_get_comp_direction;
>> +
>> + ret = devm_gpiochip_add_data(st->dev, &st->comp_gpiochip, st);
>> + if (ret)
>> + return ret;
>> + }
>> +
>> + ret = ad74413r_set_adc_conv_seq(st, AD74413R_CONV_SEQ_OFF);
>> + if (ret)
>> + return ret;
>> +
>> + ret = devm_request_irq(st->dev, spi->irq, ad74413r_adc_data_interrupt,
>> + 0, st->chip_info->name, indio_dev);
>> + if (ret)
> Minor, but would be good to have a dev_err_probe() here as
> this is something that can result in a deferred response and it would
> be good to log the debugging info.

Sure thing, will change it for the next revision.


>> + return ret;
>> +
>> + ret = devm_iio_triggered_buffer_setup(st->dev, indio_dev,
>> + &iio_pollfunc_store_time,
>> + &ad74413r_trigger_handler,
>> + &ad74413r_buffer_ops);
>> + if (ret)
>> + return ret;
>> +
>> + return devm_iio_device_register(st->dev, indio_dev);
>> +}


(sorry for sending the mail again, I was using Gmail before but now I
tried using Thunderbird so I can disable HTML formatting.


\
 
 \ /
  Last update: 2021-12-04 20:51    [W:0.035 / U:1.204 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site