lkml.org 
[lkml]   [2021]   [Dec]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v4 06/22] ASoC: tegra20-spdif: stop setting slave_id
Date
From: Arnd Bergmann <arnd@arndb.de>

The DMA resource is never set up anywhere, and passing this as slave_id
has not been the proper procedure in a long time.

As a preparation for removing all slave_id references from the ALSA code,
remove this one.

According to Dmitry Osipenko, this driver has never been used and
the mechanism for configuring DMA would not work as it is implemented,
so this part will get rewritten when the driver gets put into use
again in the future.

Reviewed-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
sound/soc/tegra/tegra20_spdif.c | 1 -
1 file changed, 1 deletion(-)

diff --git a/sound/soc/tegra/tegra20_spdif.c b/sound/soc/tegra/tegra20_spdif.c
index 6f0570cde964..e45e371edc42 100644
--- a/sound/soc/tegra/tegra20_spdif.c
+++ b/sound/soc/tegra/tegra20_spdif.c
@@ -298,7 +298,6 @@ static int tegra20_spdif_platform_probe(struct platform_device *pdev)
spdif->playback_dma_data.addr = mem->start + TEGRA20_SPDIF_DATA_OUT;
spdif->playback_dma_data.addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
spdif->playback_dma_data.maxburst = 4;
- spdif->playback_dma_data.slave_id = dmareq->start;

pm_runtime_enable(&pdev->dev);

--
2.33.1
\
 
 \ /
  Last update: 2021-12-04 15:38    [W:0.175 / U:4.180 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site