lkml.org 
[lkml]   [2021]   [Dec]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 3/4] memory: mtk-smi: Add sleep ctrl function
Date
sleep control means that when the larb go to sleep, we should wait a bit
until all the current commands are finished. thus, when the larb runtime
suspend, we need enable this function to wait until all the existed
command are finished. when the larb resume, just disable this function.
This function only improve the safe of bus. Add a new flag for this
function. Prepare for mt8186.

Signed-off-by: Anan Sun <anan.sun@mediatek.com>
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
---
drivers/memory/mtk-smi.c | 39 +++++++++++++++++++++++++++++++++++----
1 file changed, 35 insertions(+), 4 deletions(-)

diff --git a/drivers/memory/mtk-smi.c b/drivers/memory/mtk-smi.c
index b883dcc0bbfa..4b59b28e4d73 100644
--- a/drivers/memory/mtk-smi.c
+++ b/drivers/memory/mtk-smi.c
@@ -8,6 +8,7 @@
#include <linux/device.h>
#include <linux/err.h>
#include <linux/io.h>
+#include <linux/iopoll.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/of_platform.h>
@@ -32,6 +33,10 @@
#define SMI_DUMMY 0x444

/* SMI LARB */
+#define SMI_LARB_SLP_CON 0x00c
+#define SLP_PROT_EN BIT(0)
+#define SLP_PROT_RDY BIT(16)
+
#define SMI_LARB_CMD_THRT_CON 0x24
#define SMI_LARB_THRT_RD_NU_LMT_MSK GENMASK(7, 4)
#define SMI_LARB_THRT_RD_NU_LMT (5 << 4)
@@ -81,6 +86,7 @@

#define MTK_SMI_FLAG_THRT_UPDATE BIT(0)
#define MTK_SMI_FLAG_SW_FLAG BIT(1)
+#define MTK_SMI_FLAG_SLEEP_CTL BIT(2)
#define MTK_SMI_CAPS(flags, _x) (!!((flags) & (_x)))

struct mtk_smi_reg_pair {
@@ -371,6 +377,24 @@ static const struct of_device_id mtk_smi_larb_of_ids[] = {
{}
};

+static int mtk_smi_larb_sleep_ctrl(struct device *dev, bool to_sleep)
+{
+ struct mtk_smi_larb *larb = dev_get_drvdata(dev);
+ int ret = 0;
+ u32 tmp;
+
+ if (to_sleep) {
+ writel_relaxed(SLP_PROT_EN, larb->base + SMI_LARB_SLP_CON);
+ ret = readl_poll_timeout_atomic(larb->base + SMI_LARB_SLP_CON,
+ tmp, !!(tmp & SLP_PROT_RDY), 10, 1000);
+ if (ret)
+ dev_warn(dev, "sleep ctrl is not ready(0x%x).\n", tmp);
+ } else {
+ writel_relaxed(0, larb->base + SMI_LARB_SLP_CON);
+ }
+ return ret;
+}
+
static int mtk_smi_device_link_common(struct device *dev, struct device **com_dev)
{
struct platform_device *smi_com_pdev;
@@ -477,24 +501,31 @@ static int __maybe_unused mtk_smi_larb_resume(struct device *dev)
{
struct mtk_smi_larb *larb = dev_get_drvdata(dev);
const struct mtk_smi_larb_gen *larb_gen = larb->larb_gen;
- int ret;
+ int ret = 0;

ret = clk_bulk_prepare_enable(larb->smi.clk_num, larb->smi.clks);
- if (ret < 0)
+ if (ret)
return ret;

+ if (MTK_SMI_CAPS(larb->larb_gen->flags_general, MTK_SMI_FLAG_SLEEP_CTL))
+ ret = mtk_smi_larb_sleep_ctrl(dev, false);
+
/* Configure the basic setting for this larb */
larb_gen->config_port(dev);

- return 0;
+ return ret;
}

static int __maybe_unused mtk_smi_larb_suspend(struct device *dev)
{
struct mtk_smi_larb *larb = dev_get_drvdata(dev);
+ int ret = 0;
+
+ if (MTK_SMI_CAPS(larb->larb_gen->flags_general, MTK_SMI_FLAG_SLEEP_CTL))
+ ret = mtk_smi_larb_sleep_ctrl(dev, true);

clk_bulk_disable_unprepare(larb->smi.clk_num, larb->smi.clks);
- return 0;
+ return ret;
}

static const struct dev_pm_ops smi_larb_pm_ops = {
--
2.18.0
\
 
 \ /
  Last update: 2021-12-03 07:41    [W:0.100 / U:4.328 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site