lkml.org 
[lkml]   [2021]   [Dec]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] counter: ti-eqep: Enable for TDA4VM/J721E
On Tue, Nov 30, 2021 at 02:33:46PM -0500, Jason Kridner wrote:
> Counter TI-EQEP was tested on TDA4VM/J721E SoC.
>
> Overlay used for testing EQEP0 and EQEP1:
>
> &cbass_main {
> #address-cells = <2>;
> #size-cells = <2>;
>
> eqep0: qep@3200000 {
> compatible = "ti,am3352-eqep";
> reg = <0 0x3200000 0 0x100>;
> power-domains = <&k3_pds 94 TI_SCI_PD_EXCLUSIVE>;
> clocks = <&k3_clks 94 0>;
> clock-names = "eqep0-ficlk";
> interrupts = <GIC_SPI 322 IRQ_TYPE_EDGE_RISING>;
> interrupt-names = "eqep0";
> symlink = "bone/eQEP0"; /* A - P9_42, B - P9_27 */
>
> count_mode = <0>;
> swap_input = <0>;
> invert_qa = <1>;
> invert_qb = <1>;
> invert_qi = <0>;
> invert_qs = <0>;
> };
>
> eqep1: qep@3210000 {
> compatible = "ti,am3352-eqep";
> reg = <0 0x3210000 0 0x100>;
> power-domains = <&k3_pds 95 TI_SCI_PD_EXCLUSIVE>;
> clocks = <&k3_clks 95 0>;
> clock-names = "eqep1-ficlk";
> interrupts = <GIC_SPI 323 IRQ_TYPE_EDGE_RISING>;
> interrupt-names = "eqep1";
> symlink = "bone/eQEP1"; /* A - P8_35, B - P8_33 */
>
> count_mode = <0>;
> swap_input = <0>;
> invert_qa = <1>;
> invert_qb = <1>;
> invert_qi = <0>;
> invert_qs = <0>;
> };
>
> eqep2: qep@3220000 {
> status = "disabled";
> compatible = "ti,am3352-eqep";
> reg = <0 0x3220000 0 0x100>;
> power-domains = <&k3_pds 96 TI_SCI_PD_EXCLUSIVE>;
> clocks = <&k3_clks 96 0>;
> clock-names = "eqep2-ficlk";
> interrupts = <GIC_SPI 324 IRQ_TYPE_EDGE_RISING>;
> interrupt-names = "eqep2";
>
> count_mode = <0>;
> swap_input = <0>;
> invert_qa = <1>;
> invert_qb = <1>;
> invert_qi = <0>;
> invert_qs = <0>;
> };
> };
>
> Signed-off-by: Jason Kridner <jkridner@beagleboard.org>

Hello Jason,

The change in this patch is a simple architecture enablement so I don't
have a problem with it given that it's been tested. However, I would
like the commit message simplified as Nishanth recommends before we
merge this patch, so please resubmit it to clean that up. Regardless,
for the code change itself I'll give my ack.

Acked-by: William Breathitt Gray <vilhelm.gray@gmail.com>

> ---
> drivers/counter/Kconfig | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/drivers/counter/Kconfig b/drivers/counter/Kconfig
> index 2de53ab0dd25..453490059c88 100644
> --- a/drivers/counter/Kconfig
> +++ b/drivers/counter/Kconfig
> @@ -51,7 +51,7 @@ config STM32_LPTIMER_CNT
>
> config TI_EQEP
> tristate "TI eQEP counter driver"
> - depends on (SOC_AM33XX || COMPILE_TEST)
> + depends on (SOC_AM33XX || ARCH_K3 || COMPILE_TEST)
> select REGMAP_MMIO
> help
> Select this option to enable the Texas Instruments Enhanced Quadrature
> --
> 2.30.2
>
[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2021-12-04 02:47    [W:0.045 / U:0.088 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site