lkml.org 
[lkml]   [2021]   [Dec]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 2/3] regulator: dt-bindings: maxim,max77802: Convert to dtschema
Date
Convert the regulators of Maxim MAX77802 PMIC to DT schema format.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
---
.../bindings/regulator/max77802.txt | 111 ----------------
.../bindings/regulator/maxim,max77802.yaml | 118 ++++++++++++++++++
2 files changed, 118 insertions(+), 111 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/regulator/max77802.txt
create mode 100644 Documentation/devicetree/bindings/regulator/maxim,max77802.yaml

diff --git a/Documentation/devicetree/bindings/regulator/max77802.txt b/Documentation/devicetree/bindings/regulator/max77802.txt
deleted file mode 100644
index b82943d83677..000000000000
--- a/Documentation/devicetree/bindings/regulator/max77802.txt
+++ /dev/null
@@ -1,111 +0,0 @@
-Binding for Maxim MAX77802 regulators
-
-This is a part of device tree bindings of MAX77802 multi-function device.
-More information can be found in bindings/mfd/max77802.txt file.
-
-The MAX77802 PMIC has 10 high-efficiency Buck and 32 Low-dropout (LDO)
-regulators that can be controlled over I2C.
-
-Following properties should be present in main device node of the MFD chip.
-
-Optional properties:
-- inb1-supply: The input supply for BUCK1
-- inb2-supply: The input supply for BUCK2
-- inb3-supply: The input supply for BUCK3
-- inb4-supply: The input supply for BUCK4
-- inb5-supply: The input supply for BUCK5
-- inb6-supply: The input supply for BUCK6
-- inb7-supply: The input supply for BUCK7
-- inb8-supply: The input supply for BUCK8
-- inb9-supply: The input supply for BUCK9
-- inb10-supply: The input supply for BUCK10
-- inl1-supply: The input supply for LDO8 and LDO15
-- inl2-supply: The input supply for LDO17, LDO27, LDO30 and LDO35
-- inl3-supply: The input supply for LDO3, LDO5, LDO6 and LDO7
-- inl4-supply: The input supply for LDO10, LDO11, LDO13 and LDO14
-- inl5-supply: The input supply for LDO9 and LDO19
-- inl6-supply: The input supply for LDO4, LDO21, LDO24 and LDO33
-- inl7-supply: The input supply for LDO18, LDO20, LDO28 and LDO29
-- inl9-supply: The input supply for LDO12, LDO23, LDO25, LDO26, LDO32 and LDO34
-- inl10-supply: The input supply for LDO1 and LDO2
-
-Optional nodes:
-- regulators : The regulators of max77802 have to be instantiated
- under subnode named "regulators" using the following format.
-
- regulator-name {
- standard regulator constraints....
- };
- refer Documentation/devicetree/bindings/regulator/regulator.txt
-
-The regulator node name should be initialized with a string to get matched
-with their hardware counterparts as follow. The valid names are:
-
- -LDOn : for LDOs, where n can lie in ranges 1-15, 17-21, 23-30
- and 32-35.
- example: LDO1, LDO2, LDO35.
- -BUCKn : for BUCKs, where n can lie in range 1 to 10.
- example: BUCK1, BUCK5, BUCK10.
-
-The max77802 regulator supports two different operating modes: Normal and Low
-Power Mode. Some regulators support the modes to be changed at startup or by
-the consumers during normal operation while others only support to change the
-mode during system suspend. The standard regulator suspend states binding can
-be used to configure the regulator operating mode.
-
-The regulators that support the standard "regulator-initial-mode" property,
-changing their mode during normal operation are: LDOs 1, 3, 20 and 21.
-
-The possible values for "regulator-initial-mode" and "regulator-mode" are:
- 1: Normal regulator voltage output mode.
- 3: Low Power which reduces the quiescent current down to only 1uA
-
-The valid modes list is defined in the dt-bindings/regulator/maxim,max77802.h
-header and can be included by device tree source files.
-
-The standard "regulator-mode" property can only be used for regulators that
-support changing their mode to Low Power Mode during suspend. These regulators
-are: BUCKs 2-4 and LDOs 1-35. Also, it only takes effect if the regulator has
-been enabled for the given suspend state using "regulator-on-in-suspend" and
-has not been disabled for that state using "regulator-off-in-suspend".
-
-Example:
-
- max77802@9 {
- compatible = "maxim,max77802";
- interrupt-parent = <&wakeup_eint>;
- interrupts = <26 0>;
- reg = <0x09>;
- #address-cells = <1>;
- #size-cells = <0>;
-
- inb1-supply = <&parent_reg>;
-
- regulators {
- ldo1_reg: LDO1 {
- regulator-name = "vdd_1v0";
- regulator-min-microvolt = <1000000>;
- regulator-max-microvolt = <1000000>;
- regulator-always-on;
- regulator-initial-mode = <MAX77802_OPMODE_LP>;
- };
-
- ldo11_reg: LDO11 {
- regulator-name = "vdd_ldo11";
- regulator-min-microvolt = <1900000>;
- regulator-max-microvolt = <1900000>;
- regulator-always-on;
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-mode = <MAX77802_OPMODE_LP>;
- };
- };
-
- buck1_reg: BUCK1 {
- regulator-name = "vdd_mif";
- regulator-min-microvolt = <950000>;
- regulator-max-microvolt = <1300000>;
- regulator-always-on;
- regulator-boot-on;
- };
- };
diff --git a/Documentation/devicetree/bindings/regulator/maxim,max77802.yaml b/Documentation/devicetree/bindings/regulator/maxim,max77802.yaml
new file mode 100644
index 000000000000..01e1c40685ff
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/maxim,max77802.yaml
@@ -0,0 +1,118 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/maxim,max77802.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Maxim MAX77802 Power Management IC regulators
+
+maintainers:
+ - Javier Martinez Canillas <javier@dowhile0.org>
+ - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
+
+description: |
+ This is a part of device tree bindings for Maxim MAX77802 Power Management
+ Integrated Circuit (PMIC).
+
+ The Maxim MAX77686 provides 10 high-efficiency Buck and 32 Low-DropOut (LDO)
+ regulators.
+
+ See also Documentation/devicetree/bindings/mfd/maxim,max77802.yaml for
+ additional information and example.
+
+ Certain regulators support "regulator-initial-mode" and "regulator-mode".
+ The valid modes list is defined in the dt-bindings/regulator/maxim,max77802.h
+ and their meaning is:
+ 1 - Normal regulator voltage output mode.
+ 3 - Low Power which reduces the quiescent current down to only 1uA
+
+ The standard "regulator-mode" property can only be used for regulators that
+ support changing their mode to Low Power Mode during suspend. These
+ regulators are: bucks 2-4 and LDOs 1-35. Also, it only takes effect if the
+ regulator has been enabled for the given suspend state using
+ "regulator-on-in-suspend" and has not been disabled for that state using
+ "regulator-off-in-suspend".
+
+patternProperties:
+ # LDO1, LDO3, LDO20, LDO21
+ "^LDO([13]|2[01])$":
+ type: object
+ $ref: regulator.yaml#
+ unevaluatedProperties: false
+ description:
+ LDOs supporting the regulator-initial-mode property and changing their
+ mode during normal operation.
+
+ properties:
+ regulator-initial-mode: true
+
+ patternProperties:
+ regulator-state-(standby|mem|disk):
+ type: object
+ properties:
+ regulator-mode: true
+
+ required:
+ - regulator-name
+
+ # LDO2, LDO4-15, LDO17-19, LDO23-30, LDO32-35
+ "^LDO([24-9]|1[0-5789]|2[3-9]|3[02345])$":
+ type: object
+ $ref: regulator.yaml#
+ unevaluatedProperties: false
+ description:
+ LDOs supporting the regulator-mode property (changing mode to Low Power
+ Mode during suspend).
+
+ properties:
+ regulator-initial-mode: false
+
+ patternProperties:
+ regulator-state-(standby|mem|disk):
+ type: object
+ properties:
+ regulator-mode: true
+
+ required:
+ - regulator-name
+
+ # buck2-4
+ "^BUCK[2-4]$":
+ type: object
+ $ref: regulator.yaml#
+ unevaluatedProperties: false
+ description:
+ bucks supporting the regulator-mode property (changing mode to Low Power
+ Mode during suspend).
+
+ properties:
+ regulator-initial-mode: false
+
+ patternProperties:
+ regulator-state-(standby|mem|disk):
+ type: object
+ properties:
+ regulator-mode: true
+
+ required:
+ - regulator-name
+
+ # buck1, buck5-10
+ "^BUCK([15-9]|10)$":
+ type: object
+ $ref: regulator.yaml#
+ unevaluatedProperties: false
+
+ properties:
+ regulator-initial-mode: false
+
+ patternProperties:
+ regulator-state-(standby|mem|disk):
+ type: object
+ properties:
+ regulator-mode: false
+
+ required:
+ - regulator-name
+
+additionalProperties: false
--
2.32.0
\
 
 \ /
  Last update: 2021-12-28 17:44    [W:0.066 / U:4.080 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site