lkml.org 
[lkml]   [2021]   [Dec]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 5.15 121/128] hwmom: (lm90) Fix citical alarm status for MAX6680/MAX6681
Date
From: Guenter Roeck <linux@roeck-us.net>

commit da7dc0568491104c7acb632e9d41ddce9aaabbb1 upstream.

Tests with a real chip and a closer look into the datasheet reveals
that the local and remote critical alarm status bits are swapped for
MAX6680/MAX6681.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/hwmon/lm90.c | 10 ++++++++--
1 file changed, 8 insertions(+), 2 deletions(-)

--- a/drivers/hwmon/lm90.c
+++ b/drivers/hwmon/lm90.c
@@ -190,6 +190,7 @@ enum chips { lm90, adm1032, lm99, lm86,
#define LM90_HAVE_EXTENDED_TEMP (1 << 8) /* extended temperature support*/
#define LM90_PAUSE_FOR_CONFIG (1 << 9) /* Pause conversion for config */
#define LM90_HAVE_CRIT (1 << 10)/* Chip supports CRIT/OVERT register */
+#define LM90_HAVE_CRIT_ALRM_SWP (1 << 11)/* critical alarm bits swapped */

/* LM90 status */
#define LM90_STATUS_LTHRM (1 << 0) /* local THERM limit tripped */
@@ -415,7 +416,8 @@ static const struct lm90_params lm90_par
.reg_local_ext = MAX6657_REG_R_LOCAL_TEMPL,
},
[max6680] = {
- .flags = LM90_HAVE_OFFSET | LM90_HAVE_CRIT,
+ .flags = LM90_HAVE_OFFSET | LM90_HAVE_CRIT
+ | LM90_HAVE_CRIT_ALRM_SWP,
.alert_alarms = 0x7c,
.max_convrate = 7,
},
@@ -1201,6 +1203,7 @@ static const u8 lm90_temp_emerg_index[3]
static const u8 lm90_min_alarm_bits[3] = { 5, 3, 11 };
static const u8 lm90_max_alarm_bits[3] = { 6, 4, 12 };
static const u8 lm90_crit_alarm_bits[3] = { 0, 1, 9 };
+static const u8 lm90_crit_alarm_bits_swapped[3] = { 1, 0, 9 };
static const u8 lm90_emergency_alarm_bits[3] = { 15, 13, 14 };
static const u8 lm90_fault_bits[3] = { 0, 2, 10 };

@@ -1226,7 +1229,10 @@ static int lm90_temp_read(struct device
*val = (data->alarms >> lm90_max_alarm_bits[channel]) & 1;
break;
case hwmon_temp_crit_alarm:
- *val = (data->alarms >> lm90_crit_alarm_bits[channel]) & 1;
+ if (data->flags & LM90_HAVE_CRIT_ALRM_SWP)
+ *val = (data->alarms >> lm90_crit_alarm_bits_swapped[channel]) & 1;
+ else
+ *val = (data->alarms >> lm90_crit_alarm_bits[channel]) & 1;
break;
case hwmon_temp_emergency_alarm:
*val = (data->alarms >> lm90_emergency_alarm_bits[channel]) & 1;

\
 
 \ /
  Last update: 2021-12-27 16:54    [W:0.389 / U:1.920 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site