lkml.org 
[lkml]   [2021]   [Dec]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[RFC PATCH v2 1/5] irqchip/realtek-rtl: map control data to virq
Date
The driver assigned the irqchip and irq handler to the hardware irq,
instead of the virq. This is incorrect, and only worked because these
irq numbers happened to be the same on the devices used for testing the
original driver.

Fixes: 9f3a0f34b84a ("irqchip: Add support for Realtek RTL838x/RTL839x interrupt controller")
Signed-off-by: Sander Vanheule <sander@svanheule.net>
---
drivers/irqchip/irq-realtek-rtl.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/irqchip/irq-realtek-rtl.c b/drivers/irqchip/irq-realtek-rtl.c
index fd9f275592d2..d6788dd93c7b 100644
--- a/drivers/irqchip/irq-realtek-rtl.c
+++ b/drivers/irqchip/irq-realtek-rtl.c
@@ -62,7 +62,7 @@ static struct irq_chip realtek_ictl_irq = {

static int intc_map(struct irq_domain *d, unsigned int irq, irq_hw_number_t hw)
{
- irq_set_chip_and_handler(hw, &realtek_ictl_irq, handle_level_irq);
+ irq_set_chip_and_handler(irq, &realtek_ictl_irq, handle_level_irq);

return 0;
}
--
2.33.1
\
 
 \ /
  Last update: 2021-12-26 21:03    [W:0.103 / U:2.028 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site