lkml.org 
[lkml]   [2021]   [Dec]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v4 20/22] ARM: tegra: Add HDMI audio graph to Tegra20 device-tree
From
Date
16.12.2021 16:46, Thierry Reding пишет:
> On Sat, Dec 04, 2021 at 05:37:23PM +0300, Dmitry Osipenko wrote:
>> Add HDMI audio graph to Tegra20 device-tree to enable HDMI audio on
>> Tegra20 devices.
>>
>> Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
>> ---
>> arch/arm/boot/dts/tegra20.dtsi | 22 +++++++++++++++++++++-
>> 1 file changed, 21 insertions(+), 1 deletion(-)
>>
>> diff --git a/arch/arm/boot/dts/tegra20.dtsi b/arch/arm/boot/dts/tegra20.dtsi
>> index 72cbe32d0c1d..dde228bcbbff 100644
>> --- a/arch/arm/boot/dts/tegra20.dtsi
>> +++ b/arch/arm/boot/dts/tegra20.dtsi
>> @@ -186,7 +186,7 @@ rgb {
>> };
>> };
>>
>> - hdmi@54280000 {
>> + tegra_hdmi: hdmi@54280000 {
>> compatible = "nvidia,tegra20-hdmi";
>> reg = <0x54280000 0x00040000>;
>> interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
>> @@ -1063,4 +1063,24 @@ pmu {
>> interrupt-affinity = <&{/cpus/cpu@0}>,
>> <&{/cpus/cpu@1}>;
>> };
>> +
>> + sound-hdmi {
>> + compatible = "simple-audio-card";
>> + simple-audio-card,name = "NVIDIA Tegra20 HDMI";
>> +
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> +
>> + simple-audio-card,dai-link@0 {
>> + reg = <0>;
>> +
>> + cpu {
>> + sound-dai = <&tegra_spdif>;
>> + };
>> +
>> + codec {
>> + sound-dai = <&tegra_hdmi>;
>> + };
>> + };
>> + };
>
> Should this be status = "disabled" and then only enabled for platforms
> that actually enable HDMI?

Assuming that HDMI node is disabled, we assume that the card won't be
initialized. It won't be a problem to restructure this card in DT later
on if we will have any other use-cases than we currently have, but this
is unlikely to happen in practice.

\
 
 \ /
  Last update: 2021-12-16 15:26    [W:0.059 / U:27.536 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site