lkml.org 
[lkml]   [2021]   [Dec]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 1/4] dt-bindings: memory: mediatek: Correct the minItems of clk for larbs
On Mon, Dec 13, 2021 at 02:48:52PM +0800, Yong Wu wrote:
> On Fri, 2021-12-03 at 17:34 -0600, Rob Herring wrote:
> > On Fri, 03 Dec 2021 14:40:24 +0800, Yong Wu wrote:
> > > If a platform's larb support gals, there will be some larbs have a
> > > one
> > > more "gals" clock while the others still only need "apb"/"smi"
> > > clocks.
> > > then the minItems is 2 and the maxItems is 3.
> > >
> > > Fixes: 27bb0e42855a ("dt-bindings: memory: mediatek: Convert SMI to
> > > DT schema")
> > > Signed-off-by: Yong Wu <yong.wu@mediatek.com>
> > > ---
> > > .../bindings/memory-controllers/mediatek,smi-larb.yaml |
> > > 2 +-
> > > 1 file changed, 1 insertion(+), 1 deletion(-)
> > >
> >
> > Running 'make dtbs_check' with the schema in this patch gives the
> > following warnings. Consider if they are expected or the schema is
> > incorrect. These may not be new warnings.
> >
> > Note that it is not yet a requirement to have 0 warnings for
> > dtbs_check.
> > This will change in the future.
> >
> > Full log is available here:
> > https://patchwork.ozlabs.org/patch/1563127
> >
> >
> > larb@14016000: 'mediatek,larb-id' is a required property
> > arch/arm64/boot/dts/mediatek/mt8167-pumpkin.dt.yaml
>
> I will fix this in next version. This property is not needed in mt8167.
>
> >
> > larb@14017000: clock-names: ['apb', 'smi'] is too short
> > arch/arm64/boot/dts/mediatek/mt8183-evb.dt.yaml
> > arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-
> > burnet.dt.yaml
> > arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-damu.dt.yaml
> > arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-
> > fennel14.dt.yaml
> > arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-fennel-
> > sku1.dt.yaml
> > arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-fennel-
> > sku6.dt.yaml
> > arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-juniper-
> > sku16.dt.yaml
> > arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-kappa.dt.yaml
> > arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-kenzo.dt.yaml
> > arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-willow-
> > sku0.dt.yaml
> > arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-willow-
> > sku1.dt.yaml
> > arch/arm64/boot/dts/mediatek/mt8183-kukui-kakadu.dt.yaml
> > arch/arm64/boot/dts/mediatek/mt8183-kukui-kodama-sku16.dt.yaml
> > arch/arm64/boot/dts/mediatek/mt8183-kukui-kodama-sku272.dt.yaml
> > arch/arm64/boot/dts/mediatek/mt8183-kukui-kodama-sku288.dt.yaml
> > arch/arm64/boot/dts/mediatek/mt8183-kukui-kodama-sku32.dt.yaml
> > arch/arm64/boot/dts/mediatek/mt8183-kukui-krane-sku0.dt.yaml
> > arch/arm64/boot/dts/mediatek/mt8183-kukui-krane-sku176.dt.yaml
> > arch/arm64/boot/dts/mediatek/mt8183-pumpkin.dt.yaml
>
> Some larbs only have two clocks(apb/smi) in mt8183. thus it is
> reasonable for me. I won't fix this in next version.

You also need to adjust 'clock-names' to allow for 2 items.

Rob

\
 
 \ /
  Last update: 2021-12-13 21:31    [W:0.051 / U:1.152 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site