lkml.org 
[lkml]   [2021]   [Dec]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 10/25] x86/sgx: Support enclave page permission changes
Date
In the initial (SGX1) version of SGX, pages in an enclave need to be
created with permissions that support all usages of the pages, from the
time the enclave is initialized until it is unloaded. For example,
pages used by a JIT compiler or when code needs to otherwise be
relocated need to always have RWX permissions.

SGX2 includes two functions that can be used to modify the enclave page
permissions of regular enclave pages within an initialized enclave.
ENCLS[EMODPR] is run from the OS and used to restrict enclave page
permissions while ENCLU[EMODPE] is run from within the enclave to
extend enclave page permissions.

Enclave page permission changes need to be approached with care and
for this reason this initial support is to allow enclave page
permission changes _only_ if the new permissions are the same or
more restrictive that the permissions originally vetted at the time the
pages were added to the enclave. Support for extending enclave page
permissions beyond what was originally vetted is deferred.

Whether enclave page permissions are restricted or extended it
is necessary to ensure that the page table entries and enclave page
permissions are in sync. Introduce a new ioctl, SGX_IOC_PAGE_MODP, to
support enclave page permission changes. Since the OS has no insight
in how permissions may have been extended from within the enclave all
page permission requests are treated as permission restrictions. This
ioctl is used when enclave page permissions need to be restricted via
the OS as well as after enclave page permissions have been extended
from within the enclave (to ensure correct page table entries are
generated). With this ioctl the user specifies a page range and the
permissions to be applied to all pages in the provided range. The ioctl
itself can return an error code based on failures encountered by the OS.
It is also possible for SGX specific failures to be encountered. Add a
result output parameter to communicate the SGX return code. It is
possible for the permission change request to fail on a particular
page. To support partial success the ioctl will return the number
of pages that were successfully changed.

Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
---
arch/x86/include/uapi/asm/sgx.h | 20 +++
arch/x86/kernel/cpu/sgx/encl.c | 4 +-
arch/x86/kernel/cpu/sgx/encl.h | 3 +
arch/x86/kernel/cpu/sgx/ioctl.c | 235 ++++++++++++++++++++++++++++++++
4 files changed, 260 insertions(+), 2 deletions(-)

diff --git a/arch/x86/include/uapi/asm/sgx.h b/arch/x86/include/uapi/asm/sgx.h
index f4b81587e90b..24bebc31e336 100644
--- a/arch/x86/include/uapi/asm/sgx.h
+++ b/arch/x86/include/uapi/asm/sgx.h
@@ -29,6 +29,8 @@ enum sgx_page_flags {
_IOW(SGX_MAGIC, 0x03, struct sgx_enclave_provision)
#define SGX_IOC_VEPC_REMOVE_ALL \
_IO(SGX_MAGIC, 0x04)
+#define SGX_IOC_PAGE_MODP \
+ _IOWR(SGX_MAGIC, 0x05, struct sgx_page_modp)

/**
* struct sgx_enclave_create - parameter structure for the
@@ -76,6 +78,24 @@ struct sgx_enclave_provision {
__u64 fd;
};

+/**
+ * struct sgx_page_modp - parameter structure for the %SGX_IOC_PAGE_MODP ioctl
+ * @offset: starting page offset (page aligned relative to enclave base
+ * address defined in SECS)
+ * @length: length of memory (multiple of the page size)
+ * @prot: new protection bits of pages in range described by @offset
+ * and @length
+ * @result: SGX result code of ENCLS[EMODPR] function
+ * @count: bytes successfully changed (multiple of page size)
+ */
+struct sgx_page_modp {
+ __u64 offset;
+ __u64 length;
+ __u64 prot;
+ __u64 result;
+ __u64 count;
+};
+
struct sgx_enclave_run;

/**
diff --git a/arch/x86/kernel/cpu/sgx/encl.c b/arch/x86/kernel/cpu/sgx/encl.c
index ba39186d5a28..03c4d7e00b44 100644
--- a/arch/x86/kernel/cpu/sgx/encl.c
+++ b/arch/x86/kernel/cpu/sgx/encl.c
@@ -90,8 +90,8 @@ static struct sgx_epc_page *sgx_encl_eldu(struct sgx_encl_page *encl_page,
return epc_page;
}

-static struct sgx_encl_page *sgx_encl_load_page(struct sgx_encl *encl,
- unsigned long addr)
+struct sgx_encl_page *sgx_encl_load_page(struct sgx_encl *encl,
+ unsigned long addr)
{
struct sgx_epc_page *epc_page;
struct sgx_encl_page *entry;
diff --git a/arch/x86/kernel/cpu/sgx/encl.h b/arch/x86/kernel/cpu/sgx/encl.h
index cb9f16d457ac..848a28d28d3d 100644
--- a/arch/x86/kernel/cpu/sgx/encl.h
+++ b/arch/x86/kernel/cpu/sgx/encl.h
@@ -120,4 +120,7 @@ void sgx_free_va_slot(struct sgx_va_page *va_page, unsigned int offset);
bool sgx_va_page_full(struct sgx_va_page *va_page);
void sgx_encl_free_epc_page(struct sgx_epc_page *page);

+struct sgx_encl_page *sgx_encl_load_page(struct sgx_encl *encl,
+ unsigned long addr);
+
#endif /* _X86_ENCL_H */
diff --git a/arch/x86/kernel/cpu/sgx/ioctl.c b/arch/x86/kernel/cpu/sgx/ioctl.c
index 491d2700a54d..5dddb3c9f742 100644
--- a/arch/x86/kernel/cpu/sgx/ioctl.c
+++ b/arch/x86/kernel/cpu/sgx/ioctl.c
@@ -682,6 +682,238 @@ static long sgx_ioc_enclave_provision(struct sgx_encl *encl, void __user *arg)
return sgx_set_attribute(&encl->attributes_mask, params.fd);
}

+/**
+ * sgx_page_modp - Align enclave (EPCM) and OS (PTE) view of page permission
+ * @encl: Enclave to which the pages belong.
+ * @modp: Checked parameters from user on which pages need modifying
+ * and their new permissions.
+ *
+ * SGX2 distinguishes between extending and restricting the enclave page
+ * permissions maintained by the hardware (EPCM permissions) of pages
+ * belonging to an initialized enclave (after SGX_IOC_ENCLAVE_INIT).
+ *
+ * EPCM permissions can be extended anytime directly from the enclave with
+ * no visibility from the OS. This is accomplished with ENCLU[EMODPE]
+ * run from within enclave. Accessing pages with the new, extended,
+ * permissions requires the OS to update the PTE to handle the subsequent
+ * #PF correctly.
+ *
+ * EPCM permissions cannot be restricted from within the enclave, the enclave
+ * requires the OS to run the privileged level 0 instructions ENCLS[EMODPR]
+ * and ENCLS[ETRACK] to achieve this.
+ *
+ * Since OS does not have insight into enclave's ENCLU[EMODPE] calls all
+ * EPCM permission changes are treated as restricting of (EPCM) permissions.
+ * Page table entries are cleared to ensure that the fault handler installs
+ * new entries with correct permissions.
+ *
+ * Return:
+ * - 0: Success.
+ * - -errno: Otherwise.
+ */
+static long sgx_page_modp(struct sgx_encl *encl, struct sgx_page_modp *modp)
+{
+ unsigned long vm_prot, run_prot_restore;
+ struct sgx_encl_page *entry;
+ struct sgx_secinfo secinfo;
+ unsigned long addr;
+ u64 secinfo_perm;
+ unsigned long c;
+ void *epc_virt;
+ int ret;
+
+ secinfo_perm = modp->prot & SGX_SECINFO_PERMISSION_MASK;
+
+ if ((secinfo_perm & SGX_SECINFO_W) && !(secinfo_perm & SGX_SECINFO_R))
+ return -EINVAL;
+
+ memset(&secinfo, 0, sizeof(secinfo));
+
+ secinfo.flags = secinfo_perm;
+
+ vm_prot = _calc_vm_trans(secinfo.flags, SGX_SECINFO_R, PROT_READ) |
+ _calc_vm_trans(secinfo.flags, SGX_SECINFO_W, PROT_WRITE) |
+ _calc_vm_trans(secinfo.flags, SGX_SECINFO_X, PROT_EXEC);
+ vm_prot = calc_vm_prot_bits(vm_prot, 0);
+
+ for (c = 0 ; c < modp->length; c += PAGE_SIZE) {
+ addr = encl->base + modp->offset + c;
+
+ mutex_lock(&encl->lock);
+
+ entry = sgx_encl_load_page(encl, addr);
+ if (IS_ERR(entry)) {
+ ret = PTR_ERR(entry) == -EBUSY ? -EAGAIN : -EFAULT;
+ goto out_unlock;
+ }
+
+ /*
+ * Changing EPCM permissions is only supported on regular
+ * SGX pages. Attempting this change on other pages will
+ * result in #PF.
+ */
+ if (entry->type != SGX_PAGE_TYPE_REG) {
+ ret = -EINVAL;
+ goto out_unlock;
+ }
+
+ /*
+ * Do not verify if current runtime protection bits are what
+ * is being requested. The enclave may have done some
+ * permission extending calls without letting OS know and
+ * thus permission restriction may still be needed even if
+ * from OS perspective the permissions are unchanged.
+ */
+
+ /* Do not exceed permissions that have been vetted. */
+ if ((entry->vm_max_prot_bits & vm_prot) != vm_prot) {
+ ret = -EPERM;
+ goto out_unlock;
+ }
+
+ /* Make sure page stays around while releasing mutex. */
+ if (sgx_unmark_page_reclaimable(entry->epc_page)) {
+ ret = -EAGAIN;
+ goto out_unlock;
+ }
+
+ /*
+ * Change runtime protection before zapping PTEs to ensure
+ * any new #PF uses new permissions. EPCM permissions not
+ * changed yet.
+ */
+ run_prot_restore = entry->vm_run_prot_bits;
+ entry->vm_run_prot_bits = vm_prot;
+
+ mutex_unlock(&encl->lock);
+ /*
+ * Do not keep encl->lock because of dependency on
+ * mmap_lock acquired in sgx_zap_enclave_ptes().
+ */
+ sgx_zap_enclave_ptes(encl, addr);
+
+ mutex_lock(&encl->lock);
+
+ /* Change EPCM permissions. */
+ epc_virt = sgx_get_epc_virt_addr(entry->epc_page);
+ ret = __emodpr(&secinfo, epc_virt);
+ if (encls_faulted(ret)) {
+ /*
+ * All possible faults should be avoidable:
+ * parameters have been checked, will only change
+ * permissions of a regular page, and no concurrent
+ * SGX1/SGX2 ENCLS instructions since these
+ * are protected with mutex.
+ */
+ pr_err_once("EMODPR encountered exception %d\n",
+ ENCLS_TRAPNR(ret));
+ ret = -EFAULT;
+ goto out_prot_restore;
+ }
+ if (encls_failed(ret)) {
+ modp->result = ret;
+ ret = -EFAULT;
+ goto out_prot_restore;
+ }
+
+ epc_virt = sgx_get_epc_virt_addr(encl->secs.epc_page);
+ ret = __etrack(epc_virt);
+ if (ret) {
+ /*
+ * ETRACK only fails when there is an OS issue. For
+ * example, two consecutive ETRACK was sent without
+ * completed IPI between.
+ */
+ pr_err_once("ETRACK returned %d (0x%x)", ret, ret);
+ /*
+ * Send IPIs to kick CPUs out of the enclave and
+ * try ETRACK again.
+ */
+ on_each_cpu_mask(sgx_encl_cpumask(encl),
+ sgx_ipi_cb, NULL, 1);
+ ret = __etrack(epc_virt);
+ if (ret) {
+ pr_err_once("ETRACK repeat returned %d (0x%x)",
+ ret, ret);
+ ret = -EFAULT;
+ goto out_reclaim;
+ }
+ }
+ on_each_cpu_mask(sgx_encl_cpumask(encl), sgx_ipi_cb, NULL, 1);
+
+ sgx_mark_page_reclaimable(entry->epc_page);
+ mutex_unlock(&encl->lock);
+ }
+
+ ret = 0;
+ goto out;
+
+out_prot_restore:
+ entry->vm_run_prot_bits = run_prot_restore;
+out_reclaim:
+ sgx_mark_page_reclaimable(entry->epc_page);
+out_unlock:
+ mutex_unlock(&encl->lock);
+out:
+ modp->count = c;
+
+ return ret;
+}
+
+/**
+ * sgx_ioc_page_modp() - handler for %SGX_IOC_PAGE_MODP
+ * @encl: an enclave pointer
+ * @arg: userspace pointer to a &struct sgx_page_modp instance
+ *
+ * Return:
+ * - 0: Success
+ * - -errno: Otherwise
+ */
+static long sgx_ioc_page_modp(struct sgx_encl *encl, void __user *arg)
+{
+ struct sgx_page_modp params;
+ long ret;
+
+ /*
+ * Ensure that there is a change this could succeed: (1) SGX2
+ * is required, and (2) only pages in an initialized enclave could
+ * be modified.
+ */
+ if (!(cpu_feature_enabled(X86_FEATURE_SGX2)))
+ return -ENODEV;
+
+ if (!test_bit(SGX_ENCL_INITIALIZED, &encl->flags))
+ return -EINVAL;
+
+ /*
+ * Obtain parameters from user and perform sanity checks.
+ */
+ if (copy_from_user(&params, arg, sizeof(params)))
+ return -EFAULT;
+
+ if (!IS_ALIGNED(params.offset, PAGE_SIZE))
+ return -EINVAL;
+
+ if (!params.length || params.length & (PAGE_SIZE - 1))
+ return -EINVAL;
+
+ if (params.offset + params.length - PAGE_SIZE >= encl->size)
+ return -EINVAL;
+
+ if (params.prot & ~SGX_SECINFO_PERMISSION_MASK)
+ return -EINVAL;
+
+ if (params.result || params.count)
+ return -EINVAL;
+
+ ret = sgx_page_modp(encl, &params);
+
+ if (copy_to_user(arg, &params, sizeof(params)))
+ return -EFAULT;
+
+ return ret;
+}
+
long sgx_ioctl(struct file *filep, unsigned int cmd, unsigned long arg)
{
struct sgx_encl *encl = filep->private_data;
@@ -703,6 +935,9 @@ long sgx_ioctl(struct file *filep, unsigned int cmd, unsigned long arg)
case SGX_IOC_ENCLAVE_PROVISION:
ret = sgx_ioc_enclave_provision(encl, (void __user *)arg);
break;
+ case SGX_IOC_PAGE_MODP:
+ ret = sgx_ioc_page_modp(encl, (void __user *)arg);
+ break;
default:
ret = -ENOIOCTLCMD;
break;
--
2.25.1
\
 
 \ /
  Last update: 2021-12-01 20:24    [W:0.476 / U:7.872 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site