lkml.org 
[lkml]   [2021]   [Oct]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: [PATCH v20 2/2] wireless: Initial driver submission for pureLiFi STA devices
On Mon, Oct 18, 2021 at 11:00:55AM +0100, Srinivasan Raju wrote:
> This driver implementation has been based on the zd1211rw driver
>
> Driver is based on 802.11 softMAC Architecture and uses
> native 802.11 for configuration and management
>
> The driver is compiled and tested in ARM, x86 architectures and
> compiled in powerpc architecture

Just small style issues in this review.

> Signed-off-by: Srinivasan Raju <srini.raju@purelifi.com>
> ---
> MAINTAINERS | 6 +
> drivers/net/wireless/Kconfig | 1 +
> drivers/net/wireless/Makefile | 1 +
> drivers/net/wireless/purelifi/Kconfig | 17 +
> drivers/net/wireless/purelifi/Makefile | 2 +
> drivers/net/wireless/purelifi/plfxlc/Kconfig | 14 +
> drivers/net/wireless/purelifi/plfxlc/Makefile | 3 +
> drivers/net/wireless/purelifi/plfxlc/chip.c | 95 ++
> drivers/net/wireless/purelifi/plfxlc/chip.h | 89 ++
> .../net/wireless/purelifi/plfxlc/firmware.c | 275 +++++
> drivers/net/wireless/purelifi/plfxlc/intf.h | 52 +
> drivers/net/wireless/purelifi/plfxlc/mac.c | 770 ++++++++++++++
> drivers/net/wireless/purelifi/plfxlc/mac.h | 190 ++++
> drivers/net/wireless/purelifi/plfxlc/usb.c | 975 ++++++++++++++++++
> drivers/net/wireless/purelifi/plfxlc/usb.h | 196 ++++
> 15 files changed, 2686 insertions(+)
> create mode 100644 drivers/net/wireless/purelifi/Kconfig
> create mode 100644 drivers/net/wireless/purelifi/Makefile
> create mode 100644 drivers/net/wireless/purelifi/plfxlc/Kconfig
> create mode 100644 drivers/net/wireless/purelifi/plfxlc/Makefile
> create mode 100644 drivers/net/wireless/purelifi/plfxlc/chip.c
> create mode 100644 drivers/net/wireless/purelifi/plfxlc/chip.h
> create mode 100644 drivers/net/wireless/purelifi/plfxlc/firmware.c
> create mode 100644 drivers/net/wireless/purelifi/plfxlc/intf.h
> create mode 100644 drivers/net/wireless/purelifi/plfxlc/mac.c
> create mode 100644 drivers/net/wireless/purelifi/plfxlc/mac.h
> create mode 100644 drivers/net/wireless/purelifi/plfxlc/usb.c
> create mode 100644 drivers/net/wireless/purelifi/plfxlc/usb.h


> diff --git a/drivers/net/wireless/purelifi/plfxlc/chip.h b/drivers/net/wireless/purelifi/plfxlc/chip.h
> new file mode 100644
> index 000000000000..167e9b9bd7a7
> --- /dev/null
> +++ b/drivers/net/wireless/purelifi/plfxlc/chip.h
> @@ -0,0 +1,89 @@
> +/* SPDX-License-Identifier: GPL-2.0-only */
> +/*
> + * Copyright (c) 2021 pureLiFi
> + */
> +
> +#ifndef _LF_X_CHIP_H
> +#define _LF_X_CHIP_H
> +
> +#include <net/mac80211.h>
> +
> +#include "usb.h"
> +
> +enum unit_type {
> + STA = 0,
> + AP = 1,
> +};
> +
> +enum {
> + PLFXLC_RADIO_OFF = 0,
> + PLFXLC_RADIO_ON = 1,
> +};
> +
> +struct purelifi_chip {
> + struct purelifi_usb usb;
> + struct mutex mutex; /* lock to protect chip data */
> + enum unit_type unit_type;
> + u16 link_led;
> + u8 beacon_set;
> + __le16 beacon_interval;

Does seem little wierd that one variable is __le16. You could change
this u16 because there will not be anymore conversion either way.

> +};

> +#endif /* _LF_X_CHIP_H */
> diff --git a/drivers/net/wireless/purelifi/plfxlc/firmware.c b/drivers/net/wireless/purelifi/plfxlc/firmware.c
> new file mode 100644
> index 000000000000..30a8a63e13b6
> --- /dev/null
> +++ b/drivers/net/wireless/purelifi/plfxlc/firmware.c

> +
> +int download_fpga(struct usb_interface *intf)
> +{
> + int r, actual_length;
> + int fw_data_i, blk_tran_len = PLF_BULK_TLEN;
> + const char *fw_name;
> + unsigned char *fpga_dmabuff = NULL;
> + unsigned char *fw_data;
> + const struct firmware *fw = NULL;
> + struct usb_device *udev = interface_to_usbdev(intf);

Can you please make something for function variables. They seems totally
random. If I am correct net/ and drivers/net want's reverse christmas
tree format.

> +int download_xl_firmware(struct usb_interface *intf)
> +{
> + const struct firmware *fwp = NULL;
> + struct firmware_file file = {0};
> + int s, r;
> + u8 *buf;
> + u32 i;
> + const char *fw_pack;
> + struct usb_device *udev = interface_to_usbdev(intf);
> +
> + r = send_vendor_command(udev, PLF_VNDR_XL_FW_CMD, NULL, 0);
> + msleep(PLF_MSLEEP_TIME);
> +
> + if (r) {
> + dev_err(&intf->dev, "vendor command failed (%d)\n", r);
> + return -EINVAL;
> + }
> + /* Code for single pack file download */
> +
> + fw_pack = "plfxlc/lifi-xl.bin";
> +
> + r = request_firmware(&fwp, fw_pack, &intf->dev);
> + if (r) {
> + dev_err(&intf->dev, "Request_firmware failed (%d)\n", r);
> + return -EINVAL;
> + }
> + file.total_files = get_unaligned_le32(&fwp->data[0]);
> + file.total_size = get_unaligned_le32(&fwp->size);
> +
> + dev_dbg(&intf->dev, "XL Firmware (%d, %d)\n",
> + file.total_files, file.total_size);
> +
> + buf = kzalloc(PLF_XL_BUF_LEN, GFP_KERNEL);
> + if (!buf) {
> + release_firmware(fwp);
> + return -ENOMEM;
> + }
> +
> + if (file.total_files > 10) {
> + dev_err(&intf->dev, "Too many files (%d)\n", file.total_files);
> + release_firmware(fwp);
> + kfree(buf);
> + return -EINVAL;
> + }
> +
> + /* Download firmware files in multiple steps */
> + for (s = 0; s < file.total_files; s++) {
> + buf[0] = s;
> + r = send_vendor_command(udev, PLF_VNDR_XL_FILE_CMD, buf,
> + PLF_XL_BUF_LEN);
> +
> + if (s < file.total_files - 1)
> + file.size = get_unaligned_le32(&fwp->data[4 + ((s + 1) * 4)])
> + - get_unaligned_le32(&fwp->data[4 + (s) * 4]);
> + else
> + file.size = file.total_size -
> + get_unaligned_le32(&fwp->data[4 + (s) * 4]);
> +
> + if (file.size > file.total_size || file.size > 60000) {
> + dev_err(&intf->dev, "File size is too large (%d)\n", file.size);
> + break;
> + }
> +
> + file.start_addr = get_unaligned_le32(&fwp->data[4 + (s * 4)]);
> +
> + if (file.size % PLF_XL_BUF_LEN && s < 2)
> + file.size += PLF_XL_BUF_LEN - file.size % PLF_XL_BUF_LEN;
> +
> + file.control_packets = file.size / PLF_XL_BUF_LEN;
> +
> + for (i = 0; i < file.control_packets; i++) {
> + memcpy(buf,
> + &fwp->data[file.start_addr + (i * PLF_XL_BUF_LEN)],
> + PLF_XL_BUF_LEN);
> + r = send_vendor_command(udev, PLF_VNDR_XL_DATA_CMD, buf,
> + PLF_XL_BUF_LEN);
> + }
> + dev_dbg(&intf->dev, "fw-dw step=%d,r=%d size=%d\n", s, r,
> + file.size);
> + }
> + release_firmware(fwp);
> + kfree(buf);
> +
> + /* Code for single pack file download ends fw download finish*/

space after finish

> +
> + r = send_vendor_command(udev, PLF_VNDR_XL_EX_CMD, NULL, 0);
> + dev_dbg(&intf->dev, "Download fpga (4) (%d)\n", r);
> +
> + return 0;
> +}

> diff --git a/drivers/net/wireless/purelifi/plfxlc/mac.c b/drivers/net/wireless/purelifi/plfxlc/mac.c
> new file mode 100644
> index 000000000000..6e403d5ac84c
> --- /dev/null
> +++ b/drivers/net/wireless/purelifi/plfxlc/mac.c


> +int purelifi_restore_settings(struct purelifi_mac *mac)
> +{
> + struct sk_buff *beacon;
> + int beacon_interval, beacon_period;
> +
> + spin_lock_irq(&mac->lock);
> + beacon_interval = mac->beacon.interval;
> + beacon_period = mac->beacon.period;
> + spin_unlock_irq(&mac->lock);
> +
> + if (mac->type != NL80211_IFTYPE_ADHOC)
> + return 0;
> +
> + if (mac->vif) {
> + beacon = ieee80211_beacon_get(mac->hw, mac->vif);
> + if (beacon) {
> + purelifi_mac_config_beacon(mac->hw, beacon);
> + kfree_skb(beacon);
> + /* Returned skb is used only once and lowlevel
> + * driver is responsible for freeing it.

after * there is extre space.

> + */
> + }
> + }
> +
> + purelifi_set_beacon_interval(&mac->chip, beacon_interval,
> + beacon_period, mac->type);
> +
> + spin_lock_irq(&mac->lock);
> + mac->beacon.last_update = jiffies;
> + spin_unlock_irq(&mac->lock);
> +
> + return 0;
> +}

> +void purelifi_mac_tx_to_dev(struct sk_buff *skb, int error)
> +{
> + struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
> + struct ieee80211_hw *hw = info->rate_driver_data[0];
> + struct purelifi_mac *mac = purelifi_hw_mac(hw);
> +
> + ieee80211_tx_info_clear_status(info);
> + skb_pull(skb, sizeof(struct purelifi_ctrlset));
> +
> + if (unlikely(error ||
> + (info->flags & IEEE80211_TX_CTL_NO_ACK))) {
> + ieee80211_tx_status_irqsafe(hw, skb);

If this is unlikely make this return;

> + } else {

and delete this else so you get lower indention level.

> + struct sk_buff_head *q = &mac->ack_wait_queue;
> +
> + skb_queue_tail(q, skb);
> + while (skb_queue_len(q)/* > PURELIFI_MAC_MAX_ACK_WAITERS*/) {
> + purelifi_mac_tx_status(hw, skb_dequeue(q),
> + mac->ack_pending ?
> + mac->ack_signal : 0,
> + NULL);
> + mac->ack_pending = 0;
> + }
> + }
> +}
> +
> +static int purelifi_mac_config_beacon(struct ieee80211_hw *hw,
> + struct sk_buff *beacon)
> +{
> + return plf_usb_wreq(beacon->data, beacon->len,
> + USB_REQ_BEACON_WR);
> +}
> +
> +static int fill_ctrlset(struct purelifi_mac *mac, struct sk_buff *skb)

Should this also have prefix purelifi.

> +{
> + unsigned int frag_len = skb->len;
> + unsigned int tmp;
> + u32 temp_len = 0;
> + u32 temp_payload_len = 0;
> + struct purelifi_ctrlset *cs;
> +
> + if (skb_headroom(skb) < sizeof(struct purelifi_ctrlset)) {
> + dev_dbg(purelifi_mac_dev(mac), "Not enough hroom(1)\n");
> + return 1;
> + }
> +
> + cs = (void *)skb_push(skb, sizeof(struct purelifi_ctrlset));
> + temp_payload_len = frag_len;
> + temp_len = temp_payload_len +
> + sizeof(struct purelifi_ctrlset) -
> + sizeof(cs->id) - sizeof(cs->len);
> +
> + /* data packet lengths must be multiple of four bytes
> + * and must not be a multiple of 512
> + * bytes. First, it is attempted to append the
> + * data packet in the tailroom of the skb. In rare
> + * ocasions, the tailroom is too small. In this case,
> + * the content of the packet is shifted into
> + * the headroom of the skb by memcpy. Headroom is allocated
> + * at startup (below in this file). Therefore,
> + * there will be always enough headroom. The call skb_headroom
> + * is an additional safety which might be
> + * dropped.
> + */

This is not wrapped correctly. Should be like:

/* Data packet lengths must be multiple of four bytes and must
* not be a multiple of 512 bytes. First, it is attempted to
* append the data packet in the tailroom of the skb. In rare
* ocasions, the tailroom is too small. In this case, the
* content of the packet is shifted into the headroom of the skb
* by memcpy. Headroom is allocated at startup (below in this
* file). Therefore, there will be always enough headroom. The
* call skb_headroom is an additional safety which might be
* dropped.
*/

> +
> + /* check if 32 bit aligned and align data */
> + tmp = skb->len & 3;
> + if (tmp) {
> + if (skb_tailroom(skb) < (3 - tmp)) {
> + if (skb_headroom(skb) >= 4 - tmp) {
> + u8 len;
> + u8 *src_pt;
> + u8 *dest_pt;
> +
> + len = skb->len;
> + src_pt = skb->data;
> + dest_pt = skb_push(skb, 4 - tmp);
> + memmove(dest_pt, src_pt, len);
> + } else {
> + return -ENOBUFS;
> + }
> + } else {
> + skb_put(skb, 4 - tmp);
> + }
> + temp_len += 4 - tmp;
> + }
> +
> + /* check if not multiple of 512 and align data */
> + tmp = skb->len & 0x1ff;
> + if (!tmp) {
> + if (skb_tailroom(skb) < 4) {
> + if (skb_headroom(skb) >= 4) {
> + u8 len = skb->len;
> + u8 *src_pt = skb->data;
> + u8 *dest_pt = skb_push(skb, 4);
> +
> + memcpy(dest_pt, src_pt, len);

I notice that Joe has said that you should use memmove in first version.
Just asking if this can overlap. If you are not sure memmove is safer.

> + } else {
> + /* should never happen because
> + * sufficient headroom was reserved
> + */
> + return -ENOBUFS;
> + }
> + } else {
> + skb_put(skb, 4);
> + }
> + temp_len += 4;
> + }

You use almoust same thing two times row and it is quite long. Maybe
do new inline function.

> +
> + cs->id = cpu_to_be32(USB_REQ_DATA_TX);
> + cs->len = cpu_to_be32(temp_len);
> + cs->payload_len_nw = cpu_to_be32(temp_payload_len);
> +
> + return 0;
> +}
> +
> +static void plfxlc_op_tx(struct ieee80211_hw *hw,
> + struct ieee80211_tx_control *control,
> + struct sk_buff *skb)
> +{
> + struct purelifi_mac *mac = purelifi_hw_mac(hw);
> + struct purelifi_usb *usb = &mac->chip.usb;
> + struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
> + struct purelifi_header *plhdr = (void *)skb->data;
> + unsigned long flags;
> + int r;
> +
> + r = fill_ctrlset(mac, skb);
> + if (r)
> + goto fail;
> +
> + info->rate_driver_data[0] = hw;
> +
> + if (plhdr->frametype == IEEE80211_FTYPE_DATA) {
> + u8 *dst_mac = plhdr->dmac;
> + u8 sidx;
> + bool found = false;
> + struct purelifi_usb_tx *tx = &usb->tx;
> +
> + for (sidx = 0; sidx < MAX_STA_NUM; sidx++) {
> + if (!(tx->station[sidx].flag & STATION_CONNECTED_FLAG))
> + continue;
> + if (!memcmp(tx->station[sidx].mac, dst_mac, ETH_ALEN)) {
> + found = true;
> + break;
> + }

if (memcmp(tx->station[sidx].mac, dst_mac, ETH_ALEN))
continue;

found = true;
break;

> + }
> +
> + /* Default to broadcast address for unknown MACs */
> + if (!found)
> + sidx = STA_BROADCAST_INDEX;
> +
> + /* Stop OS from sending packets, if the queue is half full */
> + if (skb_queue_len(&tx->station[sidx].data_list) > 60)
> + ieee80211_stop_queues(purelifi_usb_to_hw(usb));
> +
> + /* Schedule packet for transmission if queue is not full */
> + if (skb_queue_len(&tx->station[sidx].data_list) < 256) {
> + skb_queue_tail(&tx->station[sidx].data_list, skb);
> + purelifi_send_packet_from_data_queue(usb);
> + } else {
> + goto fail;
> + }

Reverse if statment and goto from there. Then no need for else.

> + } else {
> + spin_lock_irqsave(&usb->tx.lock, flags);
> + r = plf_usb_wreq_async(&mac->chip.usb, skb->data, skb->len,
> + USB_REQ_DATA_TX, tx_urb_complete, skb);
> + spin_unlock_irqrestore(&usb->tx.lock, flags);
> + if (r)
> + goto fail;
> + }
> + return;
> +
> +fail:
> + dev_kfree_skb(skb);
> +}
> +
> +static int purelifi_filter_ack(struct ieee80211_hw *hw, struct ieee80211_hdr *rx_hdr,
> + struct ieee80211_rx_status *stats)
> +{
> + struct purelifi_mac *mac = purelifi_hw_mac(hw);
> + struct sk_buff *skb;
> + struct sk_buff_head *q;
> + unsigned long flags;
> + bool found = 0;

bool is nicer if used with true/false.

> + int i, position = 0;
> +
> + if (!ieee80211_is_ack(rx_hdr->frame_control))
> + return 0;
> +
> + dev_dbg(purelifi_mac_dev(mac), "ACK Received\n");
> +
> + /* code based on zy driver, this logic may need fix */
> + q = &mac->ack_wait_queue;
> + spin_lock_irqsave(&q->lock, flags);
> +
> + skb_queue_walk(q, skb) {
> + struct ieee80211_hdr *tx_hdr;
> +
> + position++;
> +
> + if (mac->ack_pending && skb_queue_is_first(q, skb))
> + continue;
> + else if (mac->ack_pending == 0)

if is enogh

> + break;
> +
> + tx_hdr = (struct ieee80211_hdr *)skb->data;
> + if (likely(ether_addr_equal(tx_hdr->addr2, rx_hdr->addr1))) {
> + found = 1;
> + break;
> + }
> + }
> +
> + if (found) {
> + for (i = 1; i < position; i++)
> + skb = __skb_dequeue(q);
> + if (i == position) {
> + purelifi_mac_tx_status(hw, skb,
> + mac->ack_pending ?
> + mac->ack_signal : 0,
> + NULL);
> + mac->ack_pending = 0;
> + }
> +
> + mac->ack_pending = skb_queue_len(q) ? 1 : 0;
> + mac->ack_signal = stats->signal;
> + }
> +
> + spin_unlock_irqrestore(&q->lock, flags);
> + return 1;
> +}
> +
> +int purelifi_mac_rx(struct ieee80211_hw *hw, const u8 *buffer,
> + unsigned int length)
> +{
> + struct purelifi_mac *mac = purelifi_hw_mac(hw);
> + struct ieee80211_rx_status stats;
> + const struct rx_status *status;
> + struct sk_buff *skb;
> + int bad_frame = 0;
> + __le16 fc;
> + int need_padding;
> + unsigned int payload_length;
> + int sidx;
> + struct purelifi_usb_tx *tx;

Add space

> + /* Packet blockade during disabled interface. */
> + if (!mac->vif)
> + return 0;
> +
> + memset(&stats, 0, sizeof(stats));
> + status = (struct rx_status *)buffer;
> +
> + stats.flag = 0;
> + stats.freq = 2412;
> + stats.band = NL80211_BAND_LC;
> + mac->rssi = -15 * be16_to_cpu(status->rssi) / 10;
> +
> + stats.signal = mac->rssi;
> +
> + if (status->rate_idx > 7)
> + stats.rate_idx = 0;
> + else
> + stats.rate_idx = status->rate_idx;
> +
> + mac->crc_errors = be64_to_cpu(status->crc_error_count);
> +
> + if (!bad_frame &&
> + purelifi_filter_ack(hw, (struct ieee80211_hdr *)buffer, &stats) &&
> + !mac->pass_ctrl)
> + return 0;
> +
> + buffer += sizeof(struct rx_status);
> + payload_length = get_unaligned_be32(buffer);
> +
> + /* MTU = 1500, MAC header = 36, CRC = 4, sum = 1540 */

Seems little confusing that you write sum = 1540 and next line you use
1560.

> + if (payload_length > 1560) {
> + dev_err(purelifi_mac_dev(mac), " > MTU %u\n", payload_length);
> + return 0;
> + }
> + buffer += sizeof(u32);
> +
> + fc = get_unaligned((__le16 *)buffer);
> + need_padding = ieee80211_is_data_qos(fc) ^ ieee80211_has_a4(fc);
> +
> + tx = &mac->chip.usb.tx;
> +
> + for (sidx = 0; sidx < MAX_STA_NUM - 1; sidx++) {
> + if (memcmp(&buffer[10], tx->station[sidx].mac, ETH_ALEN))
> + continue;
> + if (tx->station[sidx].flag & STATION_CONNECTED_FLAG) {
> + tx->station[sidx].flag |= STATION_HEARTBEAT_FLAG;
> + break;
> + }
> + }
> +
> + if (sidx == MAX_STA_NUM - 1) {
> + for (sidx = 0; sidx < MAX_STA_NUM - 1; sidx++) {
> + if (tx->station[sidx].flag & STATION_CONNECTED_FLAG)
> + continue;
> + memcpy(tx->station[sidx].mac, &buffer[10], ETH_ALEN);
> + tx->station[sidx].flag |= STATION_CONNECTED_FLAG;
> + tx->station[sidx].flag |= STATION_HEARTBEAT_FLAG;
> + break;
> + }
> + }
> +
> + switch (buffer[0]) {
> + case IEEE80211_STYPE_PROBE_REQ:
> + dev_dbg(purelifi_mac_dev(mac), "Probe request\n");
> + break;
> + case IEEE80211_STYPE_ASSOC_REQ:
> + dev_dbg(purelifi_mac_dev(mac), "Association request\n");
> + break;
> + case IEEE80211_STYPE_AUTH:
> + dev_dbg(purelifi_mac_dev(mac), "Authentication req\n");
> + break;
> + case IEEE80211_FTYPE_DATA:
> + dev_dbg(purelifi_mac_dev(mac), "802.11 data frame\n");
> + break;
> + }
> +
> + skb = dev_alloc_skb(payload_length + (need_padding ? 2 : 0));
> + if (!skb)
> + return -ENOMEM;
> +
> + if (need_padding)
> + /* Make sure that the payload data is 4 byte aligned. */
> + skb_reserve(skb, 2);
> +
> + skb_put_data(skb, buffer, payload_length);
> + memcpy(IEEE80211_SKB_RXCB(skb), &stats, sizeof(stats));
> + ieee80211_rx_irqsafe(hw, skb);
> + return 0;
> +}
> +
> +static int plfxlc_op_add_interface(struct ieee80211_hw *hw,
> + struct ieee80211_vif *vif)
> +{
> + struct purelifi_mac *mac = purelifi_hw_mac(hw);
> + static const char * const iftype80211[] = {
> + [NL80211_IFTYPE_STATION] = "Station",
> + [NL80211_IFTYPE_ADHOC] = "Adhoc"
> + };
> +
> + if (mac->type != NL80211_IFTYPE_UNSPECIFIED)
> + return -EOPNOTSUPP;
> +
> + if (vif->type == NL80211_IFTYPE_ADHOC ||
> + vif->type == NL80211_IFTYPE_STATION) {
> + dev_dbg(purelifi_mac_dev(mac), "%s %s\n", __func__,
> + iftype80211[vif->type]);
> + mac->type = vif->type;
> + mac->vif = vif;
> + } else {
> + dev_dbg(purelifi_mac_dev(mac), "unsupported iftype\n");
> + return -EOPNOTSUPP;
> + }

Reverse if so no else needed.

> +
> + return 0;
> +}

> +static void plfxlc_op_bss_info_changed(struct ieee80211_hw *hw,
> + struct ieee80211_vif *vif,
> + struct ieee80211_bss_conf *bss_conf,
> + u32 changes)
> +{
> + struct purelifi_mac *mac = purelifi_hw_mac(hw);
> + int associated;
> +
> + dev_dbg(purelifi_mac_dev(mac), "changes: %x\n", changes);
> +
> + if (mac->type != NL80211_IFTYPE_ADHOC) { /* for STATION */
> + associated = is_valid_ether_addr(bss_conf->bssid);
> + goto exit_all;
> + }
> + /* for ADHOC */
> + associated = true;
> + if (changes & BSS_CHANGED_BEACON) {
> + struct sk_buff *beacon = ieee80211_beacon_get(hw, vif);
> +
> + if (beacon) {
> + purelifi_mac_config_beacon(hw, beacon);
> + kfree_skb(beacon);
> + /*Returned skb is used only once and

space after *

> + * low-level driver is
> + * responsible for freeing it.
> + */
> + }
> + }
> +
> + if (changes & BSS_CHANGED_BEACON_ENABLED) {
> + u16 interval = 0;
> + u8 period = 0;
> +
> + if (bss_conf->enable_beacon) {
> + period = bss_conf->dtim_period;
> + interval = bss_conf->beacon_int;
> + }
> +
> + spin_lock_irq(&mac->lock);
> + mac->beacon.period = period;
> + mac->beacon.interval = interval;
> + mac->beacon.last_update = jiffies;
> + spin_unlock_irq(&mac->lock);
> +
> + purelifi_set_beacon_interval(&mac->chip, interval,
> + period, mac->type);
> + }
> +exit_all:
> + spin_lock_irq(&mac->lock);
> + mac->associated = associated;
> + spin_unlock_irq(&mac->lock);
> +}

> +static const struct ieee80211_ops plfxlc_ops = {
> + .tx = plfxlc_op_tx,
> + .start = plfxlc_op_start,
> + .stop = plfxlc_op_stop,
> + .add_interface = plfxlc_op_add_interface,
> + .remove_interface = plfxlc_op_remove_interface,
> + .set_rts_threshold = purelifi_set_rts_threshold,
> + .config = plfxlc_op_config,
> + .configure_filter = plfxlc_op_configure_filter,
> + .bss_info_changed = plfxlc_op_bss_info_changed,
> + .get_stats = purelifi_get_stats,
> + .get_et_sset_count = purelifi_get_et_sset_count,
> + .get_et_stats = purelifi_get_et_stats,
> + .get_et_strings = purelifi_get_et_strings,
> +};

Just asking why some prefixes are purelifi and some are plfxlc?

> diff --git a/drivers/net/wireless/purelifi/plfxlc/mac.h b/drivers/net/wireless/purelifi/plfxlc/mac.h
> new file mode 100644
> index 000000000000..3852d7343a40
> --- /dev/null
> +++ b/drivers/net/wireless/purelifi/plfxlc/mac.h
> @@ -0,0 +1,190 @@
> +struct purelifi_mac {
> + struct purelifi_chip chip;
> + spinlock_t lock; /* lock for mac data */
> + struct ieee80211_hw *hw;
> + struct ieee80211_vif *vif;
> + struct beacon beacon;
> + struct work_struct set_rts_cts_work;
> + struct work_struct process_intr;
> + struct purelifi_mc_hash multicast_hash;
> + u8 intr_buffer[USB_MAX_EP_INT_BUFFER];
> + u8 regdomain;
> + u8 default_regdomain;
> + u8 channel;
> + int type;
> + int associated;
> + unsigned long flags;
> + struct sk_buff_head ack_wait_queue;
> + struct ieee80211_channel channels[14];
> + struct ieee80211_rate rates[12];
> + struct ieee80211_supported_band band;

Maybe move these below other ieee8011_* structs. Will be muh more
readable. Right now this struct is just big mess to read.

> +
> + /* whether to pass frames with CRC errors to stack */
> + bool pass_failed_fcs;
> +
> + /* whether to pass control frames to stack */
> + bool pass_ctrl;
> +
> + /* whether we have received a 802.11 ACK that is pending */
> + bool ack_pending;
> +
> + /* signal strength of the last 802.11 ACK received */
> + int ack_signal;
> +
> + unsigned char hw_address[ETH_ALEN];
> + char serial_number[PURELIFI_SERIAL_LEN];
> + u64 crc_errors;
> + u64 rssi;
> +};

> diff --git a/drivers/net/wireless/purelifi/plfxlc/usb.c b/drivers/net/wireless/purelifi/plfxlc/usb.c
> new file mode 100644
> index 000000000000..8cd9f223025e
> --- /dev/null
> +++ b/drivers/net/wireless/purelifi/plfxlc/usb.c

> +void purelifi_send_packet_from_data_queue(struct purelifi_usb *usb)
> +{
> + struct sk_buff *skb = NULL;
> + unsigned long flags;
> + static u8 sidx;

Static here, but I might already tell that in preview message, but here
for safety.

> + u8 last_served_sidx;
> + struct purelifi_usb_tx *tx = &usb->tx;
> +
> + spin_lock_irqsave(&tx->lock, flags);
> + last_served_sidx = sidx;
> + do {
> + sidx = (sidx + 1) % MAX_STA_NUM;
> + if (!tx->station[sidx].flag & STATION_CONNECTED_FLAG)
> + continue;
> + if (!(tx->station[sidx].flag & STATION_FIFO_FULL_FLAG))
> + skb = skb_peek(&tx->station[sidx].data_list);
> + } while ((sidx != last_served_sidx) && (!skb));
> +
> + if (skb) {
> + skb = skb_dequeue(&tx->station[sidx].data_list);
> + plf_usb_wreq_async(usb, skb->data, skb->len, USB_REQ_DATA_TX,
> + tx_urb_complete, skb);
> + if (skb_queue_len(&tx->station[sidx].data_list) <= 60)
> + ieee80211_wake_queues(purelifi_usb_to_hw(usb));
> + }
> + spin_unlock_irqrestore(&tx->lock, flags);
> +}

> +static void rx_urb_complete(struct urb *urb)
> +{
> + int r;
> + struct purelifi_usb *usb;
> + struct purelifi_usb_tx *tx;
> + const u8 *buffer;
> + unsigned int length;
> + u16 status;
> + u8 sidx;
> +
> + if (!urb) {
> + pr_err("urb is NULL\n");
> + return;
> + } else if (!urb->context) {

Another if is as good as this.

> + pr_err("urb ctx is NULL\n");
> + return;
> + }

> +int purelifi_usb_enable_rx(struct purelifi_usb *usb)
> +{
> + int r;
> + struct purelifi_usb_rx *rx = &usb->rx;
> +
> + mutex_lock(&rx->setup_mutex);
> + r = __lf_x_usb_enable_rx(usb);
> + if (!r)
> + usb->rx_usb_enabled = 1;

Use true.

> +
> + mutex_unlock(&rx->setup_mutex);
> +
> + return r;
> +}

> +int purelifi_usb_tx(struct purelifi_usb *usb, struct sk_buff *skb)
> +{
> + int r;
> + struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
> + struct usb_device *udev = purelifi_usb_to_usbdev(usb);
> + struct urb *urb;
> + struct purelifi_usb_tx *tx = &usb->tx;
> +
> + if (!test_bit(PLF_BIT_ENABLED, &tx->enabled)) {
> + r = -ENOENT;
> + goto out;
> + }
> +
> + urb = usb_alloc_urb(0, GFP_ATOMIC);
> + if (!urb) {
> + r = -ENOMEM;
> + goto out;
> + }
> +
> + usb_fill_bulk_urb(urb, udev, usb_sndbulkpipe(udev, EP_DATA_OUT),
> + skb->data, skb->len, tx_urb_complete, skb);
> +
> + info->rate_driver_data[1] = (void *)jiffies;
> + skb_queue_tail(&tx->submitted_skbs, skb);
> + usb_anchor_urb(urb, &tx->submitted);
> +
> + r = usb_submit_urb(urb, GFP_ATOMIC);
> + if (r) {
> + dev_dbg(purelifi_usb_dev(usb), "urb %p submit failed (%d)\n",
> + urb, r);
> + usb_unanchor_urb(urb);
> + skb_unlink(skb, &tx->submitted_skbs);
> + goto error;
> + }
> + return 0;
> +error:
> + usb_free_urb(urb);
> +out:
> + return r;

Do need to error paths in this function. Just return when goto out and
you use error just in one place.

> +}

> +int plf_usb_wreq_async(struct purelifi_usb *usb, const u8 *buffer,
> + int buffer_len, enum plf_usb_req_enum usb_req_id,
> + usb_complete_t complete_fn,
> + void *context)
> +{
> + int r;
> + struct usb_device *udev = interface_to_usbdev(ez_usb_interface);
> + struct urb *urb = usb_alloc_urb(0, GFP_ATOMIC);
> +
> + usb_fill_bulk_urb(urb, udev, usb_sndbulkpipe(udev, EP_DATA_OUT),
> + (void *)buffer, buffer_len, complete_fn, context);
> +
> + r = usb_submit_urb(urb, GFP_ATOMIC);
> +

Remove newline.

> + if (r)
> + dev_err(&udev->dev, "Async write submit failed (%d)\n", r);
> +
> + return r;
> +}
> +
> +int plf_usb_wreq(void *buffer, int buffer_len,
> + enum plf_usb_req_enum usb_req_id)
> +{
> + int r;
> + int actual_length;
> + int usb_bulk_msg_len;
> + unsigned char *dma_buffer = NULL;
> + struct usb_device *udev = interface_to_usbdev(ez_usb_interface);
> + struct plf_usb_req usb_req;
> +
> + get_usb_req(udev, buffer, buffer_len, usb_req_id, &usb_req);
> + usb_bulk_msg_len = sizeof(__le32) + sizeof(__le32) +
> + be32_to_cpu(usb_req.len);
> +
> + dma_buffer = kmemdup(&usb_req, usb_bulk_msg_len, GFP_KERNEL);
> +
> + if (!dma_buffer) {
> + r = -ENOMEM;
> + goto error;
> + }
> +
> + r = usb_bulk_msg(udev,
> + usb_sndbulkpipe(udev, EP_DATA_OUT),
> + dma_buffer, usb_bulk_msg_len,
> + &actual_length, USB_BULK_MSG_TIMEOUT_MS);
> + kfree(dma_buffer);
> +error:
> + if (r)
> + dev_err(&udev->dev, "usb_bulk_msg failed (%d)\n", r);

Can also be enomem. So maybe return -ENOMEM in upper.

> +
> + return r;
> +}

> +static int probe(struct usb_interface *intf,
> + const struct usb_device_id *id)
> +{
> + int r = 0;
> + struct purelifi_chip *chip;
> + struct purelifi_usb *usb;
> + struct purelifi_usb_tx *tx;
> + struct ieee80211_hw *hw = NULL;
> + u8 hw_address[ETH_ALEN];
> + u8 serial_number[PURELIFI_SERIAL_LEN];
> + unsigned int i;
> +
> + ez_usb_interface = intf;
> +
> + hw = purelifi_mac_alloc_hw(intf);
> +

Remove newline

> + if (!hw) {
> + r = -ENOMEM;
> + goto error;

Just return straight away. This should not need message.

> + }
> +
> + chip = &purelifi_hw_mac(hw)->chip;
> + usb = &chip->usb;
> + tx = &usb->tx;
> +
> + r = upload_mac_and_serial(intf, hw_address, serial_number);
> +

Remove newline.

<snip>

> + timer_setup(&usb->sta_queue_cleanup,
> + sta_queue_cleanup_timer_callb, 0);
> + usb->sta_queue_cleanup.expires = jiffies + STA_QUEUE_CLEANUP_JIFF;
> + add_timer(&usb->sta_queue_cleanup);
> +
> + usb->initialized = 1;

true

> + return 0;
> +error:
> + if (hw) {
> + purelifi_mac_release(purelifi_hw_mac(hw));
> + ieee80211_unregister_hw(hw);
> + ieee80211_free_hw(hw);
> + }
> + dev_err(&intf->dev, "pureLifi:Device error");
> + return r;
> +}
> +
> +static void disconnect(struct usb_interface *intf)
> +{
> + struct ieee80211_hw *hw = purelifi_intf_to_hw(intf);
> + struct purelifi_mac *mac;
> + struct purelifi_usb *usb;
> +
> + /* Either something really bad happened, or
> + * we're just dealing with
> + * a DEVICE_INSTALLER.
> + */

wrapping

> + if (!hw)
> + return;
> +
> + mac = purelifi_hw_mac(hw);
> + usb = &mac->chip.usb;
> +
> + del_timer_sync(&usb->tx.tx_retry_timer);
> + del_timer_sync(&usb->sta_queue_cleanup);
> +
> + ieee80211_unregister_hw(hw);
> +
> + purelifi_usb_disable_tx(usb);
> + purelifi_usb_disable_rx(usb);
> +
> + /* If the disconnect has been caused by a removal of the
> + * driver module, the reset allows reloading of the driver. If the
> + * reset will not be executed here,
> + * the upload of the firmware in the
> + * probe function caused by the reloading of the driver will fail.
> + */

ditto

> + usb_reset_device(interface_to_usbdev(intf));
> +
> + purelifi_mac_release(mac);
> + ieee80211_free_hw(hw);
> +}

> +static struct purelifi_usb *get_purelifi_usb(struct usb_interface *intf)
> +{
> + struct ieee80211_hw *hw = purelifi_intf_to_hw(intf);
> + struct purelifi_mac *mac;
> +
> + /* Either something really bad happened, or
> + * we're just dealing with
> + * a DEVICE_INSTALLER.
> + */

wrapping

Argillander

\
 
 \ /
  Last update: 2021-10-27 14:39    [W:0.135 / U:2.084 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site