lkml.org 
[lkml]   [2021]   [Oct]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH v6 1/1] iio/scmi: Add reading "raw" attribute.
From

On 20.10.21 20:51, Jonathan Cameron wrote:

> CAUTION: This email originated from outside of the organization.
> Do not click links or open attachments unless you recognize the sender and know the content is safe.
>
>
> On Tue, 19 Oct 2021 10:59:49 +0300
> Andriy Tryshnivskyy <andriy.tryshnivskyy@opensynergy.com> wrote:
>
>> Add IIO_CHAN_INFO_RAW to the mask and implement corresponding
>> reading "raw" attribute in scmi_iio_read_raw.
>> Introduce new type IIO_VAL_INT_64 to read 64-bit value
>> for "raw" attribute.
>>
> Change log needs to be below the --- otherwise we'll store it forever
> in git. A linked tag (which will be generated when I apply)
> is sufficient for this sort of historical info.
>
Sorry, this is my first patch, I was not aware of that.
Thanks for the explanation.
Quick question: since next version will include 2 patches,
I guess a change log should be moved back to the cover letter, right?


>> Changes comparing v5 -> v6:
>> * revert v5 changes since with scmi_iio_read_raw() the channel
>> can't be used by in kernel users (iio-hwmon)
>> * returned to v3 with direct mode
>> * introduce new type IIO_VAL_INT_64 to read 64-bit value
>>
>> Changes comparing v4 -> v5:
>> * call iio_device_release_direct_mode() on error
>> * code cleanup, fix typo
>>
>> Changes comparing v3 -> v4:
>> * do not use scmi_iio_get_raw() for reading raw attribute due to 32-bit
>> return value limitation (actually I reverted the previous v3)
>> * introduce scmi_iio_read_raw to scmi_iio_ext_info[] which can return
>> 64-bit value
>> * enabling/disabling and reading raw attribute is done in direct mode
>>
>> Changes comparing v2 -> v3:
>> * adaptation for changes in structure scmi_iio_priv (no member
>> named 'handle')
>>
>> Changes comparing v0 -> v2:
>> * added an error return when the error happened during config_set
>> * removed redundant cast for "readings"
>> * added check if raw value fits 32 bits
>>
>> Signed-off-by: Andriy Tryshnivskyy <andriy.tryshnivskyy@opensynergy.com>
>> ---
>> drivers/iio/common/scmi_sensors/scmi_iio.c | 57 +++++++++++++++++++++-
>> drivers/iio/industrialio-core.c | 3 ++
>> include/linux/iio/types.h | 1 +
> Two patches needed. One to introduce the new core functionality then
> a second to use it in the driver.
>
> Actual code looks good to me though I think I'd like a comment next to
> the #define as not obvious which way around the two parts will go.
>
> There are some other places we will probably need to ultimately handle this
> to allow for in kernel consumers but those can come when someone needs them.
>
> Will need an ack from Jyoti on this one though as driver author.
> Thanks,
>
> Jonathan

Sure, will split the current patch into two patches.


>> 3 files changed, 60 insertions(+), 1 deletion(-)
>>
>> diff --git a/drivers/iio/common/scmi_sensors/scmi_iio.c b/drivers/iio/common/scmi_sensors/scmi_iio.c
>> index 7cf2bf282cef..2c1aec0fd5ff 100644
>> --- a/drivers/iio/common/scmi_sensors/scmi_iio.c
>> +++ b/drivers/iio/common/scmi_sensors/scmi_iio.c
>> @@ -279,6 +279,52 @@ static int scmi_iio_get_odr_val(struct iio_dev *iio_dev, int *val, int *val2)
>> return 0;
>> }
>>
>> +static int scmi_iio_read_channel_data(struct iio_dev *iio_dev,
>> + struct iio_chan_spec const *ch, int *val, int *val2)
>> +{
>> + struct scmi_iio_priv *sensor = iio_priv(iio_dev);
>> + u32 sensor_config;
>> + struct scmi_sensor_reading readings[SCMI_IIO_NUM_OF_AXIS];
>> + int err;
>> +
>> + sensor_config = FIELD_PREP(SCMI_SENS_CFG_SENSOR_ENABLED_MASK,
>> + SCMI_SENS_CFG_SENSOR_ENABLE);
>> + err = sensor->sensor_ops->config_set(
>> + sensor->ph, sensor->sensor_info->id, sensor_config);
>> + if (err) {
>> + dev_err(&iio_dev->dev,
>> + "Error in enabling sensor %s err %d",
>> + sensor->sensor_info->name, err);
>> + return err;
>> + }
>> +
>> + err = sensor->sensor_ops->reading_get_timestamped(
>> + sensor->ph, sensor->sensor_info->id,
>> + sensor->sensor_info->num_axis, readings);
>> + if (err) {
>> + dev_err(&iio_dev->dev,
>> + "Error in reading raw attribute for sensor %s err %d",
>> + sensor->sensor_info->name, err);
>> + return err;
>> + }
>> +
>> + sensor_config = FIELD_PREP(SCMI_SENS_CFG_SENSOR_ENABLED_MASK,
>> + SCMI_SENS_CFG_SENSOR_DISABLE);
>> + err = sensor->sensor_ops->config_set(
>> + sensor->ph, sensor->sensor_info->id, sensor_config);
>> + if (err) {
>> + dev_err(&iio_dev->dev,
>> + "Error in disabling sensor %s err %d",
>> + sensor->sensor_info->name, err);
>> + return err;
>> + }
>> +
>> + *val = (u32)readings[ch->scan_index].value;
>> + *val2 = (u32)(readings[ch->scan_index].value >> 32)
>> +
>> + return IIO_VAL_INT_64;
>> +}
>> +
>> static int scmi_iio_read_raw(struct iio_dev *iio_dev,
>> struct iio_chan_spec const *ch, int *val,
>> int *val2, long mask)
>> @@ -300,6 +346,14 @@ static int scmi_iio_read_raw(struct iio_dev *iio_dev,
>> case IIO_CHAN_INFO_SAMP_FREQ:
>> ret = scmi_iio_get_odr_val(iio_dev, val, val2);
>> return ret ? ret : IIO_VAL_INT_PLUS_MICRO;
>> + case IIO_CHAN_INFO_RAW:
>> + ret = iio_device_claim_direct_mode(iio_dev);
>> + if (ret)
>> + return ret;
>> +
>> + ret = scmi_iio_read_channel_data(iio_dev, ch, val, val2);
>> + iio_device_release_direct_mode(iio_dev);
>> + return ret;
>> default:
>> return -EINVAL;
>> }
>> @@ -381,7 +435,8 @@ static void scmi_iio_set_data_channel(struct iio_chan_spec *iio_chan,
>> iio_chan->type = type;
>> iio_chan->modified = 1;
>> iio_chan->channel2 = mod;
>> - iio_chan->info_mask_separate = BIT(IIO_CHAN_INFO_SCALE);
>> + iio_chan->info_mask_separate =
>> + BIT(IIO_CHAN_INFO_SCALE) | BIT(IIO_CHAN_INFO_RAW);
>> iio_chan->info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SAMP_FREQ);
>> iio_chan->info_mask_shared_by_type_available =
>> BIT(IIO_CHAN_INFO_SAMP_FREQ);
>> diff --git a/drivers/iio/industrialio-core.c b/drivers/iio/industrialio-core.c
>> index 6d2175eb7af2..49e42d04ea16 100644
>> --- a/drivers/iio/industrialio-core.c
>> +++ b/drivers/iio/industrialio-core.c
>> @@ -702,6 +702,9 @@ static ssize_t __iio_format_value(char *buf, size_t offset, unsigned int type,
>> }
>> case IIO_VAL_CHAR:
>> return sysfs_emit_at(buf, offset, "%c", (char)vals[0]);
>> + case IIO_VAL_INT_64:
>> + tmp2 = (s64)((((u64)vals[1]) << 32) | (u32)vals[0]);
>> + return sysfs_emit_at(buf, offset, "%lld", tmp2);
>> default:
>> return 0;
>> }
>> diff --git a/include/linux/iio/types.h b/include/linux/iio/types.h
>> index 84b3f8175cc6..e148fe11a3dc 100644
>> --- a/include/linux/iio/types.h
>> +++ b/include/linux/iio/types.h
>> @@ -24,6 +24,7 @@ enum iio_event_info {
>> #define IIO_VAL_INT_PLUS_NANO 3
>> #define IIO_VAL_INT_PLUS_MICRO_DB 4
>> #define IIO_VAL_INT_MULTIPLE 5
>> +#define IIO_VAL_INT_64 6
> Possibly worth a descriptive comment. The other
> types tend to make it easy to assume the role
> of val and that of val2, in this case, val being
> the lower 32 bits isn't obvious...

I will add a comment here.

Thank you for your review!

Best regard,
Andriy.


>> #define IIO_VAL_FRACTIONAL 10
>> #define IIO_VAL_FRACTIONAL_LOG2 11
>> #define IIO_VAL_CHAR 12
>

\
 
 \ /
  Last update: 2021-10-20 20:57    [W:0.167 / U:1.852 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site