lkml.org 
[lkml]   [2021]   [Oct]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 1/1] ARM: dts: stm32: add pull-up to USART3 and UART7 RX pins on DKx boards
Date
Add pull-up to USART3 and UART7 RX pins to allow loop tests between USART3
and UART7 on stm32mp15 DKx boards.

Signed-off-by: Erwan Le Ray <erwan.leray@foss.st.com>

diff --git a/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi b/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi
index e13c2a9762b8..fe6e6f50151d 100644
--- a/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi
+++ b/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi
@@ -1816,7 +1816,7 @@
};
pins2 {
pinmux = <STM32_PINMUX('E', 7, AF7)>; /* UART7_RX */
- bias-disable;
+ bias-pull-up;
};
};

@@ -1826,7 +1826,7 @@
};
pins2 {
pinmux = <STM32_PINMUX('E', 7, AF7)>; /* UART7_RX */
- bias-disable;
+ bias-pull-up;
};
};

@@ -1971,7 +1971,7 @@
pins2 {
pinmux = <STM32_PINMUX('B', 12, AF8)>, /* USART3_RX */
<STM32_PINMUX('I', 10, AF8)>; /* USART3_CTS_NSS */
- bias-disable;
+ bias-pull-up;
};
};

@@ -1988,7 +1988,7 @@
};
pins3 {
pinmux = <STM32_PINMUX('B', 12, AF8)>; /* USART3_RX */
- bias-disable;
+ bias-pull-up;
};
};

@@ -2012,7 +2012,7 @@
pins2 {
pinmux = <STM32_PINMUX('B', 12, AF8)>, /* USART3_RX */
<STM32_PINMUX('B', 13, AF7)>; /* USART3_CTS_NSS */
- bias-disable;
+ bias-pull-up;
};
};

@@ -2029,7 +2029,7 @@
};
pins3 {
pinmux = <STM32_PINMUX('B', 12, AF8)>; /* USART3_RX */
- bias-disable;
+ bias-pull-up;
};
};

--
2.17.1
\
 
 \ /
  Last update: 2021-10-20 17:03    [W:0.046 / U:0.932 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site