lkml.org 
[lkml]   [2021]   [Oct]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 06/18] dt-bindings: spi: mxic: The interrupt property is not mandatory
Date
The interrupt property is not mandatory at all, this property should not
be part of the required properties list, so move it into the optional
properties list.

Fixes: 326e5c8d4a87 ("dt-binding: spi: Document Macronix controller bindings")
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
---
Documentation/devicetree/bindings/spi/spi-mxic.txt | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/spi/spi-mxic.txt b/Documentation/devicetree/bindings/spi/spi-mxic.txt
index 529f2dab2648..7bcbb229b78b 100644
--- a/Documentation/devicetree/bindings/spi/spi-mxic.txt
+++ b/Documentation/devicetree/bindings/spi/spi-mxic.txt
@@ -8,11 +8,13 @@ Required properties:
- reg: should contain 2 entries, one for the registers and one for the direct
mapping area
- reg-names: should contain "regs" and "dirmap"
-- interrupts: interrupt line connected to the SPI controller
- clock-names: should contain "ps_clk", "send_clk" and "send_dly_clk"
- clocks: should contain 3 entries for the "ps_clk", "send_clk" and
"send_dly_clk" clocks

+Optional properties:
+- interrupts: interrupt line connected to the SPI controller
+
Example:

spi@43c30000 {
--
2.27.0
\
 
 \ /
  Last update: 2021-10-20 16:29    [W:0.213 / U:0.024 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site