lkml.org 
[lkml]   [2021]   [Oct]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v4 1/3] dt-bindings: phy: Add lan966x-serdes binding
Date
Document the lan966x ethernet serdes phy driver bindings.

Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
---
.../phy/microchip,lan966x-serdes.yaml | 59 +++++++++++++++++++
1 file changed, 59 insertions(+)
create mode 100644 Documentation/devicetree/bindings/phy/microchip,lan966x-serdes.yaml

diff --git a/Documentation/devicetree/bindings/phy/microchip,lan966x-serdes.yaml b/Documentation/devicetree/bindings/phy/microchip,lan966x-serdes.yaml
new file mode 100644
index 000000000000..6e914fbbac56
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/microchip,lan966x-serdes.yaml
@@ -0,0 +1,59 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/microchip,lan966x-serdes.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip Lan966x Serdes controller
+
+maintainers:
+ - Horatiu Vultur <horatiu.vultur@microchip.com>
+
+description: |
+ Lan966x has 7 interfaces, consisting of 2 copper transceivers(CU),
+ 3 SERDES6G and 2 RGMII interfaces. Two of the SERDES6G support QSGMII.
+ Also it has 8 logical Ethernet ports which can be connected to these
+ interfaces. The Serdes controller will allow to configure these interfaces
+ and allows to "mux" the interfaces to different ports.
+
+ For simple selection of the interface that is used with a port, the
+ following macros are defined CU(X), SERDES6G(X), RGMII(X). Where X is a
+ number that represents the index of that interface type. For example
+ CU(1) means use interface copper transceivers 1. SERDES6G(2) means use
+ interface SerDes 2.
+
+properties:
+ $nodename:
+ pattern: "^serdes@[0-9a-f]+$"
+
+ compatible:
+ const: microchip,lan966x-serdes
+
+ reg:
+ items:
+ - description: HSIO registers
+ - description: HW_STAT register
+
+ '#phy-cells':
+ const: 2
+ description: |
+ - Input port to use for a given macro.
+ - The macro to be used. The macros are defined in
+ dt-bindings/phy/phy-lan966x-serdes.
+
+required:
+ - compatible
+ - reg
+ - '#phy-cells'
+
+additionalProperties: false
+
+examples:
+ - |
+ serdes: serdes@e2004010 {
+ compatible = "microchip,lan966x-serdes";
+ reg = <0xe202c000 0x9c>, <0xe2004010 0x4>;
+ #phy-cells = <2>;
+ };
+
+...
--
2.33.0
\
 
 \ /
  Last update: 2021-10-20 11:44    [W:0.056 / U:0.012 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site