lkml.org 
[lkml]   [2021]   [Oct]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH V2 3/3] arm64: dts: qcom: pm8350c: Add pwm support
Quoting Satya Priya (2021-10-19 03:48:51)
> From: satya priya <skakit@codeaurora.org>
>
> Add pwm support for PM8350C pmic.
>
> Signed-off-by: satya priya <skakit@codeaurora.org>
> ---
> Changes in V2:
> - Dropped suffix '4' from pwm phandle and removed "status=ok".
>
> arch/arm64/boot/dts/qcom/pm8350c.dtsi | 6 ++++++
> 1 file changed, 6 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/pm8350c.dtsi b/arch/arm64/boot/dts/qcom/pm8350c.dtsi
> index e1b75ae..08fc0a8 100644
> --- a/arch/arm64/boot/dts/qcom/pm8350c.dtsi
> +++ b/arch/arm64/boot/dts/qcom/pm8350c.dtsi
> @@ -29,6 +29,12 @@
> interrupt-controller;
> #interrupt-cells = <2>;
> };
> +
> + pm8350c_pwm: pwm {
> + compatible = "qcom,pm8350c-pwm";

It should have a reg property. Every node should have a single cell for
the reg property because the parent has #address-cells = <1>

> + #pwm-cells = <2>;
> + status = "disabled";
> + };
> };

\
 
 \ /
  Last update: 2021-10-20 06:27    [W:0.056 / U:4.228 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site