lkml.org 
[lkml]   [2021]   [Jan]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 1/1] usb: gadget: aspeed: fix stop dma register setting.
Date
The vhub engine has two dma mode, one is descriptor list, another
is single stage DMA. Each mode has different stop register setting.
Descriptor list operation (bit2) : 0 disable reset, 1: enable reset
Single mode operation (bit0) : 0 : disable, 1: enable

Signed-off-by: Ryan Chen <ryan_chen@aspeedtech.com>
---
drivers/usb/gadget/udc/aspeed-vhub/epn.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/usb/gadget/udc/aspeed-vhub/epn.c b/drivers/usb/gadget/udc/aspeed-vhub/epn.c
index 0bd6b20435b8..02d8bfae58fb 100644
--- a/drivers/usb/gadget/udc/aspeed-vhub/epn.c
+++ b/drivers/usb/gadget/udc/aspeed-vhub/epn.c
@@ -420,7 +420,10 @@ static void ast_vhub_stop_active_req(struct ast_vhub_ep *ep,
u32 state, reg, loops;

/* Stop DMA activity */
- writel(0, ep->epn.regs + AST_VHUB_EP_DMA_CTLSTAT);
+ if (ep->epn.desc_mode)
+ writel(VHUB_EP_DMA_CTRL_RESET, ep->epn.regs + AST_VHUB_EP_DMA_CTLSTAT);
+ else
+ writel(0, ep->epn.regs + AST_VHUB_EP_DMA_CTLSTAT);

/* Wait for it to complete */
for (loops = 0; loops < 1000; loops++) {
--
2.17.1
\
 
 \ /
  Last update: 2021-01-08 09:16    [W:0.068 / U:0.796 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site