lkml.org 
[lkml]   [2021]   [Jan]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v3] power/supply: Add ltc4162-l-charger
From
Date
Hello,

No worries on processing time. Only drawback is that since the project
ended, I may no longer have access to the actual hardware for testing.

Further inline comments below.


Met vriendelijke groet / kind regards,

Mike Looijmans
System Expert


TOPIC Embedded Products B.V.
Materiaalweg 4, 5681 RJ Best
The Netherlands

T: +31 (0) 499 33 69 69
E: mike.looijmans@topicproducts.com
W: www.topicproducts.com

Please consider the environment before printing this e-mail
On 29-12-2020 15:57, Sebastian Reichel wrote:
> Hi,
>
> Sorry for slow processing of this. Driver looks mostly fine, but I
> do have some comments.
>
> On Mon, Nov 02, 2020 at 10:21:31AM +0100, Mike Looijmans wrote:
>> Add support for the LTC4162-L Li-Ion battery charger. The driver allows
>> reading back telemetry and to set some charging options like the input
>> current limit.
>>
>> Signed-off-by: Mike Looijmans <mike.looijmans@topic.nl>
>> ---
>> v2: Use microohm units instead of milliohm
>> Add interrupt support using smbalert
>> Support obtaining cell-count from devicetree
>> v3: Fix overflows in calculations involving resistor values
>> resent, mail bounced
>>
>> drivers/power/supply/Kconfig | 8 +
>> drivers/power/supply/Makefile | 1 +
>> drivers/power/supply/ltc4162-l-charger.c | 898 +++++++++++++++++++++++
>> 3 files changed, 907 insertions(+)
>> create mode 100644 drivers/power/supply/ltc4162-l-charger.c
>>
>> diff --git a/drivers/power/supply/Kconfig b/drivers/power/supply/Kconfig
>> index eec646c568b7..23000976cb42 100644
>> --- a/drivers/power/supply/Kconfig
>> +++ b/drivers/power/supply/Kconfig
>> @@ -513,6 +513,14 @@ config CHARGER_LT3651
>> Say Y to include support for the Analog Devices (Linear Technology)
>> LT3651 battery charger which reports its status via GPIO lines.
>>
>> +config CHARGER_LTC4162L
>> + tristate "LTC4162-L charger"
>> + depends on I2C
>> + select REGMAP_I2C
>> + help
>> + Say Y to include support for the Analog Devices (Linear Technology)
>> + LTC4162-L battery charger connected to I2C.
>> +
>> config CHARGER_MAX14577
>> tristate "Maxim MAX14577/77836 battery charger driver"
>> depends on MFD_MAX14577
>> diff --git a/drivers/power/supply/Makefile b/drivers/power/supply/Makefile
>> index dd4b86318cd9..17b1cf921c44 100644
>> --- a/drivers/power/supply/Makefile
>> +++ b/drivers/power/supply/Makefile
>> @@ -70,6 +70,7 @@ obj-$(CONFIG_CHARGER_LP8788) += lp8788-charger.o
>> obj-$(CONFIG_CHARGER_GPIO) += gpio-charger.o
>> obj-$(CONFIG_CHARGER_MANAGER) += charger-manager.o
>> obj-$(CONFIG_CHARGER_LT3651) += lt3651-charger.o
>> +obj-$(CONFIG_CHARGER_LTC4162L) += ltc4162-l-charger.o
>> obj-$(CONFIG_CHARGER_MAX14577) += max14577_charger.o
>> obj-$(CONFIG_CHARGER_DETECTOR_MAX14656) += max14656_charger_detector.o
>> obj-$(CONFIG_CHARGER_MAX77650) += max77650-charger.o
>> diff --git a/drivers/power/supply/ltc4162-l-charger.c b/drivers/power/supply/ltc4162-l-charger.c
>> new file mode 100644
>> index 000000000000..b2f666113125
>> --- /dev/null
>> +++ b/drivers/power/supply/ltc4162-l-charger.c
>> @@ -0,0 +1,898 @@
>> +// SPDX-License-Identifier: GPL-2.0-or-later
>> +/*
>> + * Driver for Analog Devices (Linear Technology) LTC4162-L charger IC.
>> + * Copyright (C) 2020, Topic Embedded Products
>> + */
>> +
>> +#include <linux/module.h>
>> +#include <linux/delay.h>
>> +#include <linux/of_device.h>
>> +#include <linux/pm_runtime.h>
>> +#include <linux/power_supply.h>
>> +#include <linux/i2c.h>
>> +#include <linux/regmap.h>
>> +
>> +/* Registers (names based on what datasheet uses) */
>> +#define LTC4162L_EN_LIMIT_ALERTS_REG 0x0D
>> +#define LTC4162L_EN_CHARGER_STATE_ALERTS_REG 0x0E
>> +#define LTC4162L_EN_CHARGE_STATUS_ALERTS_REG 0x0F
>> +#define LTC4162L_CONFIG_BITS_REG 0x14
>> +#define LTC4162L_IIN_LIMIT_TARGET 0x15
>> +#define LTC4162L_ARM_SHIP_MODE 0x19
>> +#define LTC4162L_CHARGE_CURRENT_SETTING 0X1A
>> +#define LTC4162L_VCHARGE_SETTING 0X1B
>> +#define LTC4162L_C_OVER_X_THRESHOLD 0x1C
>> +#define LTC4162L_MAX_CV_TIME 0X1D
>> +#define LTC4162L_MAX_CHARGE_TIME 0X1E
>> +#define LTC4162L_CHARGER_CONFIG_BITS 0x29
>> +#define LTC4162L_CHARGER_STATE 0x34
>> +#define LTC4162L_CHARGE_STATUS 0x35
>> +#define LTC4162L_LIMIT_ALERTS_REG 0x36
>> +#define LTC4162L_CHARGER_STATE_ALERTS_REG 0x37
>> +#define LTC4162L_CHARGE_STATUS_ALERTS_REG 0x38
>> +#define LTC4162L_SYSTEM_STATUS_REG 0x39
>> +#define LTC4162L_VBAT 0x3A
>> +#define LTC4162L_VIN 0x3B
>> +#define LTC4162L_VOUT 0x3C
>> +#define LTC4162L_IBAT 0x3D
>> +#define LTC4162L_IIN 0x3E
>> +#define LTC4162L_DIE_TEMPERATURE 0x3F
>> +#define LTC4162L_THERMISTOR_VOLTAGE 0x40
>> +#define LTC4162L_BSR 0x41
>> +#define LTC4162L_JEITA_REGION 0x42
>> +#define LTC4162L_CHEM_CELLS_REG 0x43
>> +#define LTC4162L_ICHARGE_DAC 0x44
>> +#define LTC4162L_VCHARGE_DAC 0x45
>> +#define LTC4162L_IIN_LIMIT_DAC 0x46
>> +#define LTC4162L_VBAT_FILT 0x47
>> +#define LTC4162L_INPUT_UNDERVOLTAGE_DAC 0x4B
>> +
>> +/* Enumeration as in datasheet. Individual bits are mutually exclusive. */
>> +enum ltc4162l_state {
>> + battery_detection = 2048,
>> + charger_suspended = 256,
>> + precharge = 128, /* trickle on low bat voltage */
>> + cc_cv_charge = 64, /* normal charge */
>> + ntc_pause = 32,
>> + timer_term = 16,
>> + c_over_x_term = 8, /* battery is full */
>> + max_charge_time_fault = 4,
>> + bat_missing_fault = 2,
>> + bat_short_fault = 1
>> +};
>> +
>> +/* Individual bits are mutually exclusive. Only active in charging states.*/
>> +enum ltc4162l_charge_status {
>> + ilim_reg_active = 32,
>> + thermal_reg_active = 16,
>> + vin_uvcl_active = 8,
>> + iin_limit_active = 4,
>> + constant_current = 2,
>> + constant_voltage = 1,
>> + charger_off = 0
>> +};
> +use BIT(0), BIT(1), ...

I'm okay with that. This was actually a copy&paste job from the
datasheet, and though these look like bit fields, only one bit is ever
set. So BIT(x) might be misleading in that respect. Hence I preferred
keeping it as the datasheet listed it.

>
>> +/* Magic number to write to ARM_SHIP_MODE register */
>> +#define LTC4162L_ARM_SHIP_MODE_MAGIC 21325
>> +
>> +struct ltc4162l_info {
>> + struct i2c_client *client;
>> + struct regmap *regmap;
>> + struct power_supply *charger;
>> + u32 rsnsb; /* Series resistor that sets charge current, microOhm */
>> + u32 rsnsi; /* Series resistor to measure input current, microOhm */
>> + u8 cell_count; /* Number of connected cells, 0 while unknown */
>> +};
>> +
>> +static u8 ltc4162l_get_cell_count(struct ltc4162l_info *info)
>> +{
>> + int ret;
>> + unsigned int val;
>> +
>> + /* Once read successfully */
>> + if (info->cell_count)
>> + return info->cell_count;
>> +
>> + ret = regmap_read(info->regmap, LTC4162L_CHEM_CELLS_REG, &val);
>> + if (ret)
>> + return 0;
>> +
>> + /* Lower 4 bits is the cell count, or 0 if the chip doesn't know yet */
>> + val &= 0x0f;
>> + if (!val)
>> + return 0;
>> +
>> + /* Once determined, keep the value */
>> + info->cell_count = val;
>> +
>> + return val;
>> +};
>> +
>> +/* Convert enum value to POWER_SUPPLY_STATUS value */
>> +static int ltc4162l_state_decode(enum ltc4162l_state value)
>> +{
>> + switch (value) {
>> + case precharge:
>> + case cc_cv_charge:
>> + return POWER_SUPPLY_STATUS_CHARGING;
>> + case c_over_x_term:
>> + return POWER_SUPPLY_STATUS_FULL;
>> + case bat_missing_fault:
>> + case bat_short_fault:
>> + return POWER_SUPPLY_STATUS_UNKNOWN;
>> + default:
>> + return POWER_SUPPLY_STATUS_NOT_CHARGING;
>> + }
>> +};
>> +
>> +static int ltc4162l_get_status(struct ltc4162l_info *info,
>> + union power_supply_propval *val)
>> +{
>> + unsigned int regval;
>> + int ret;
>> +
>> + ret = regmap_read(info->regmap, LTC4162L_CHARGER_STATE, &regval);
>> + if (ret) {
>> + dev_err(&info->client->dev, "Failed to read CHARGER_STATE\n");
>> + return ret;
>> + }
>> +
>> + val->intval = ltc4162l_state_decode(regval);
>> +
>> + return 0;
>> +}
>> +
>> +static int ltc4162l_charge_status_decode(enum ltc4162l_charge_status value)
>> +{
>> + if (!value)
>> + return POWER_SUPPLY_CHARGE_TYPE_NONE;
>> +
>> + /* constant voltage/current and input_current limit are "fast" modes */
>> + if (value <= iin_limit_active)
>> + return POWER_SUPPLY_CHARGE_TYPE_FAST;
>> +
>> + /* Anything that's not fast we'll return as trickle */
>> + return POWER_SUPPLY_CHARGE_TYPE_TRICKLE;
>> +}
>> +
>> +static int ltc4162l_get_charge_type(struct ltc4162l_info *info,
>> + union power_supply_propval *val)
>> +{
>> + unsigned int regval;
>> + int ret;
>> +
>> + ret = regmap_read(info->regmap, LTC4162L_CHARGE_STATUS, &regval);
>> + if (ret)
>> + return ret;
>> +
>> + val->intval = ltc4162l_charge_status_decode(regval);
>> +
>> + return 0;
>> +}
>> +
>> +static int ltc4162l_state_to_health(enum ltc4162l_state value)
>> +{
>> + switch (value) {
>> + case ntc_pause:
>> + return POWER_SUPPLY_HEALTH_OVERHEAT;
>> + case timer_term:
>> + return POWER_SUPPLY_HEALTH_SAFETY_TIMER_EXPIRE;
>> + case max_charge_time_fault:
>> + return POWER_SUPPLY_HEALTH_WATCHDOG_TIMER_EXPIRE;
>> + case bat_missing_fault:
>> + return POWER_SUPPLY_HEALTH_UNSPEC_FAILURE;
>> + case bat_short_fault:
>> + return POWER_SUPPLY_HEALTH_DEAD;
>> + default:
>> + return POWER_SUPPLY_HEALTH_GOOD;
>> + }
>> +}
>> +
>> +static int ltc4162l_get_health(struct ltc4162l_info *info,
>> + union power_supply_propval *val)
>> +{
>> + unsigned int regval;
>> + int ret;
>> +
>> + ret = regmap_read(info->regmap, LTC4162L_CHARGER_STATE, &regval);
>> + if (ret)
>> + return ret;
>> +
>> + val->intval = ltc4162l_state_to_health(regval);
>> +
>> + return 0;
>> +}
>> +
>> +static int ltc4162l_get_online(struct ltc4162l_info *info,
>> + union power_supply_propval *val)
>> +{
>> + unsigned int regval;
>> + int ret;
>> +
>> + ret = regmap_read(info->regmap, LTC4162L_SYSTEM_STATUS_REG, &regval);
>> + if (ret)
>> + return ret;
>> +
>> + /* BIT(2) indicates if input voltage is sufficient to charge */
>> + val->intval = !!(regval & BIT(2));
>> +
>> + return 0;
>> +}
>> +
>> +
>> +static int ltc4162l_get_vbat(struct ltc4162l_info *info,
>> + unsigned int reg,
>> + union power_supply_propval *val)
>> +{
>> + unsigned int regval;
>> + int ret;
>> +
>> + ret = regmap_read(info->regmap, reg, &regval);
>> + if (ret)
>> + return ret;
>> +
>> + /* cell_count × 192.4μV/LSB */
>> + regval *= 1924;
>> + regval *= ltc4162l_get_cell_count(info);
>> + regval /= 10;
>> + val->intval = regval;
>> +
>> + return 0;
>> +}
>> +
>> +static int ltc4162l_get_ibat(struct ltc4162l_info *info,
>> + union power_supply_propval *val)
>> +{
>> + unsigned int regval;
>> + int ret;
>> +
>> + ret = regmap_read(info->regmap, LTC4162L_IBAT, &regval);
>> + if (ret)
>> + return ret;
>> +
>> + /* Signed 16-bit number, 1.466μV / RSNSB amperes/LSB. */
>> + ret = (s16)(regval & 0xFFFF);
>> + val->intval = 100 * mult_frac(ret, 14660, (int)info->rsnsb);
>> +
>> + return 0;
>> +}
>> +
>> +static int ltc4162l_get_icharge(struct ltc4162l_info *info,
>> + unsigned int reg,
>> + union power_supply_propval *val)
>> +{
>> + unsigned int regval;
>> + int ret;
>> +
>> + ret = regmap_read(info->regmap, reg, &regval);
>> + if (ret)
>> + return ret;
>> +
>> + regval &= BIT(6) - 1; /* Only the lower 5 bits */
>> +
>> + /* The charge current servo level: (icharge_dac + 1) × 1mV/RSNSB */
>> + ++regval;
>> + val->intval = 10000u * mult_frac(regval, 100000u, info->rsnsb);
>> +
>> + return 0;
>> +}
>> +
>> +static int ltc4162l_set_icharge(struct ltc4162l_info *info,
>> + unsigned int reg,
>> + unsigned int value)
>> +{
>> + value = mult_frac(value, info->rsnsb, 100000u);
>> + value /= 10000u;
>> +
>> + /* Round to lowest possible */
>> + if (value)
>> + --value;
>> +
>> + if (value > 31)
>> + return -EINVAL;
>> +
>> + return regmap_write(info->regmap, reg, value);
>> +}
>> +
>> +
>> +static int ltc4162l_get_vcharge(struct ltc4162l_info *info,
>> + unsigned int reg,
>> + union power_supply_propval *val)
>> +{
>> + unsigned int regval;
>> + int ret;
>> + u32 voltage;
>> +
>> + ret = regmap_read(info->regmap, reg, &regval);
>> + if (ret)
>> + return ret;
>> +
>> + regval &= BIT(6) - 1; /* Only the lower 5 bits */
>> +
>> + /*
>> + * charge voltage setting can be computed from
>> + * cell_count × (vcharge_setting × 12.5mV + 3.8125V)
>> + * where vcharge_setting ranges from 0 to 31 (4.2V max).
>> + */
>> + voltage = 3812500 + (regval * 12500);
>> + voltage *= ltc4162l_get_cell_count(info);
>> + val->intval = voltage;
>> +
>> + return 0;
>> +}
>> +
>> +static int ltc4162l_set_vcharge(struct ltc4162l_info *info,
>> + unsigned int reg,
>> + unsigned int value)
>> +{
>> + u8 cell_count = ltc4162l_get_cell_count(info);
>> +
>> + if (!cell_count)
>> + return -EBUSY; /* Not available yet, try again later */
>> +
>> + value /= cell_count;
>> +
>> + if (value < 3812500)
>> + return -EINVAL;
>> +
>> + value -= 3812500;
>> + value /= 12500;
>> +
>> + if (value > 31)
>> + return -EINVAL;
>> +
>> + return regmap_write(info->regmap, reg, value);
>> +}
>> +
>> +static int ltc4162l_get_iin_limit_dac(struct ltc4162l_info *info,
>> + union power_supply_propval *val)
>> +{
>> + unsigned int regval;
>> + int ret;
>> +
>> + ret = regmap_read(info->regmap, LTC4162L_IIN_LIMIT_DAC, &regval);
>> + if (ret)
>> + return ret;
>> +
>> + regval &= BIT(6) - 1; /* Only 6 bits */
>> +
>> + /* (iin_limit_dac + 1) × 500μV / RSNSI */
>> + ++regval;
>> + regval *= 5000000u;
>> + regval /= info->rsnsi;
>> + val->intval = 100u * regval;
>> +
>> + return 0;
>> +}
>> +
>> +static int ltc4162l_set_iin_limit(struct ltc4162l_info *info,
>> + unsigned int value)
>> +{
>> + unsigned int regval;
>> +
>> + regval = mult_frac(value, info->rsnsi, 50000u);
>> + regval /= 10000u;
>> + if (regval)
>> + --regval;
>> + if (regval > 63)
>> + regval = 63;
>> +
>> + return regmap_write(info->regmap, LTC4162L_IIN_LIMIT_TARGET, regval);
>> +}
>> +
>> +static int ltc4162l_get_die_temp(struct ltc4162l_info *info,
>> + union power_supply_propval *val)
>> +{
>> + unsigned int regval;
>> + int ret;
>> +
>> + ret = regmap_read(info->regmap, LTC4162L_DIE_TEMPERATURE, &regval);
>> + if (ret)
>> + return ret;
>> +
>> + /* die_temp × 0.0215°C/LSB - 264.4°C */
>> + ret = (s16)(regval & 0xFFFF);
>> + ret *= 215;
>> + ret /= 100; /* Centidegrees scale */
>> + ret -= 26440;
>> + val->intval = ret;
>> +
>> + return 0;
>> +}
>> +
>> +static int ltc4162l_get_term_current(struct ltc4162l_info *info,
>> + union power_supply_propval *val)
>> +{
>> + unsigned int regval;
>> + int ret;
>> +
>> + ret = regmap_read(info->regmap, LTC4162L_CHARGER_CONFIG_BITS, &regval);
>> + if (ret)
>> + return ret;
>> +
>> + /* Check if C_OVER_X_THRESHOLD is enabled */
>> + if (!(regval & BIT(2))) {
>> + val->intval = 0;
>> + return 0;
>> + }
>> +
>> + ret = regmap_read(info->regmap, LTC4162L_C_OVER_X_THRESHOLD, &regval);
>> + if (ret)
>> + return ret;
>> +
>> + /* 1.466μV / RSNSB amperes/LSB */
>> + regval *= 14660u;
>> + regval /= info->rsnsb;
>> + val->intval = 100 * regval;
>> +
>> + return 0;
>> +}
>> +
>> +static int ltc4162l_set_term_current(struct ltc4162l_info *info,
>> + unsigned int value)
>> +{
>> + int ret;
>> + unsigned int regval;
>> +
>> + if (!value) {
>> + /* Disable en_c_over_x_term when set to zero */
>> + return regmap_update_bits(info->regmap,
>> + LTC4162L_CHARGER_CONFIG_BITS,
>> + BIT(2), 0);
>> + }
>> +
>> + regval = mult_frac(value, info->rsnsb, 14660u);
>> + regval /= 100u;
>> +
>> + ret = regmap_write(info->regmap, LTC4162L_C_OVER_X_THRESHOLD, regval);
>> + if (ret)
>> + return ret;
>> +
>> + /* Set en_c_over_x_term after changing the threshold value */
>> + return regmap_update_bits(info->regmap, LTC4162L_CHARGER_CONFIG_BITS,
>> + BIT(2), BIT(2));
>> +}
>> +
>> +/* Custom properties */
>> +static const char * const ltc4162l_charge_status_name[] = {
>> + "ilim_reg_active", /* 32 */
>> + "thermal_reg_active",
>> + "vin_uvcl_active",
>> + "iin_limit_active",
>> + "constant_current",
>> + "constant_voltage",
>> + "charger_off" /* 0 */
>> +};
>> +
>> +static ssize_t charge_status_show(struct device *dev,
>> + struct device_attribute *attr, char *buf)
>> +{
>> + struct power_supply *psy = to_power_supply(dev);
>> + struct ltc4162l_info *info = power_supply_get_drvdata(psy);
>> + const char *result = ltc4162l_charge_status_name[
>> + ARRAY_SIZE(ltc4162l_charge_status_name) - 1];
>> + unsigned int regval;
>> + unsigned int mask;
>> + unsigned int index;
>> + int ret;
>> +
>> + ret = regmap_read(info->regmap, LTC4162L_CHARGE_STATUS, &regval);
>> + if (ret)
>> + return ret;
>> +
>> + /* Only one bit is set according to datasheet, let's be safe here */
>> + for (mask = 32, index = 0; mask != 0; mask >>= 1, ++index) {
>> + if (regval & mask) {
>> + result = ltc4162l_charge_status_name[index];
>> + break;
>> + }
>> + }
>> +
>> + return sprintf(buf, "%s\n", result);
>> +}
>> +static DEVICE_ATTR_RO(charge_status);
>> +
>> +static ssize_t input_voltage_show(struct device *dev,
>> + struct device_attribute *attr, char *buf)
>> +{
>> + struct power_supply *psy = to_power_supply(dev);
>> + struct ltc4162l_info *info = power_supply_get_drvdata(psy);
>> + unsigned int regval;
>> + int ret;
>> +
>> + ret = regmap_read(info->regmap, LTC4162L_VIN, &regval);
>> + if (ret)
>> + return ret;
>> +
>> + /* 1.649mV/LSB */
>> + regval *= 1694;
>> +
>> + return sprintf(buf, "%u\n", regval);
>> +}
>> +static DEVICE_ATTR_RO(input_voltage);
>> +
>> +static ssize_t input_current_show(struct device *dev,
>> + struct device_attribute *attr, char *buf)
>> +{
>> + struct power_supply *psy = to_power_supply(dev);
>> + struct ltc4162l_info *info = power_supply_get_drvdata(psy);
>> + unsigned int regval;
>> + int ret;
>> +
>> + ret = regmap_read(info->regmap, LTC4162L_IIN, &regval);
>> + if (ret)
>> + return ret;
>> +
>> + /* Signed 16-bit number, 1.466μV / RSNSI amperes/LSB. */
>> + ret = (s16)(regval & 0xFFFF);
>> + ret *= 14660;
>> + ret /= info->rsnsi;
>> + ret *= 100;
>> +
>> + return sprintf(buf, "%d\n", ret);
>> +}
>> +static DEVICE_ATTR_RO(input_current);
>> +
>> +static ssize_t force_telemetry_show(struct device *dev,
>> + struct device_attribute *attr, char *buf)
>> +{
>> + struct power_supply *psy = to_power_supply(dev);
>> + struct ltc4162l_info *info = power_supply_get_drvdata(psy);
>> + unsigned int regval;
>> + int ret;
>> +
>> + ret = regmap_read(info->regmap, LTC4162L_CONFIG_BITS_REG, &regval);
>> + if (ret)
>> + return ret;
>> +
>> + return sprintf(buf, "%u\n", regval & BIT(2) ? 1 : 0);
>> +}
>> +
>> +static ssize_t force_telemetry_store(struct device *dev,
>> + struct device_attribute *attr,
>> + const char *buf,
>> + size_t count)
>> +{
>> + struct power_supply *psy = to_power_supply(dev);
>> + struct ltc4162l_info *info = power_supply_get_drvdata(psy);
>> + int ret;
>> + unsigned int value;
>> +
>> + ret = kstrtouint(buf, 0, &value);
>> + if (ret < 0)
>> + return ret;
>> +
>> + ret = regmap_update_bits(info->regmap, LTC4162L_CONFIG_BITS_REG,
>> + BIT(2), value ? BIT(2) : 0);
>> + if (ret < 0)
>> + return ret;
>> +
>> + return count;
>> +}
>> +
>> +static DEVICE_ATTR_RW(force_telemetry);
>> +
>> +static ssize_t arm_ship_mode_show(struct device *dev,
>> + struct device_attribute *attr, char *buf)
>> +{
>> + struct power_supply *psy = to_power_supply(dev);
>> + struct ltc4162l_info *info = power_supply_get_drvdata(psy);
>> + unsigned int regval;
>> + int ret;
>> +
>> + ret = regmap_read(info->regmap, LTC4162L_ARM_SHIP_MODE, &regval);
>> + if (ret)
>> + return ret;
>> +
>> + return sprintf(buf, "%u\n",
>> + regval == LTC4162L_ARM_SHIP_MODE_MAGIC ? 1 : 0);
>> +}
>> +
>> +static ssize_t arm_ship_mode_store(struct device *dev,
>> + struct device_attribute *attr,
>> + const char *buf,
>> + size_t count)
>> +{
>> + struct power_supply *psy = to_power_supply(dev);
>> + struct ltc4162l_info *info = power_supply_get_drvdata(psy);
>> + int ret;
>> + unsigned int value;
>> +
>> + ret = kstrtouint(buf, 0, &value);
>> + if (ret < 0)
>> + return ret;
>> +
>> + ret = regmap_write(info->regmap, LTC4162L_ARM_SHIP_MODE,
>> + value ? LTC4162L_ARM_SHIP_MODE_MAGIC : 0);
>> + if (ret < 0)
>> + return ret;
>> +
>> + return count;
>> +}
>> +
>> +static DEVICE_ATTR_RW(arm_ship_mode);
>> +
>> +static struct attribute *ltc4162l_sysfs_entries[] = {
>> + &dev_attr_charge_status.attr,
>> + &dev_attr_input_voltage.attr,
>> + &dev_attr_input_current.attr,
>> + &dev_attr_force_telemetry.attr,
>> + &dev_attr_arm_ship_mode.attr,
>> + NULL,
>> +};
>> +
>> +static struct attribute_group ltc4162l_attr_group = {
>> + .name = NULL, /* put in device directory */
>> + .attrs = ltc4162l_sysfs_entries,
>> +};
>> +
>> +static int ltc4162l_get_property(struct power_supply *psy,
>> + enum power_supply_property psp,
>> + union power_supply_propval *val)
>> +{
>> + struct ltc4162l_info *info = power_supply_get_drvdata(psy);
>> +
>> + switch (psp) {
>> + case POWER_SUPPLY_PROP_STATUS:
>> + return ltc4162l_get_status(info, val);
>> + case POWER_SUPPLY_PROP_CHARGE_TYPE:
>> + return ltc4162l_get_charge_type(info, val);
>> + case POWER_SUPPLY_PROP_HEALTH:
>> + return ltc4162l_get_health(info, val);
>> + case POWER_SUPPLY_PROP_ONLINE:
>> + return ltc4162l_get_online(info, val);
>> + case POWER_SUPPLY_PROP_VOLTAGE_NOW:
>> + return ltc4162l_get_vbat(info, LTC4162L_VBAT, val);
>> + case POWER_SUPPLY_PROP_VOLTAGE_AVG:
>> + return ltc4162l_get_vbat(info, LTC4162L_VBAT_FILT, val);
>> + case POWER_SUPPLY_PROP_CURRENT_NOW:
>> + return ltc4162l_get_ibat(info, val);
>> + case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT:
>> + return ltc4162l_get_icharge(info,
>> + LTC4162L_ICHARGE_DAC, val);
>> + case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX:
>> + return ltc4162l_get_icharge(info,
>> + LTC4162L_CHARGE_CURRENT_SETTING, val);
>> + case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE:
>> + return ltc4162l_get_vcharge(info,
>> + LTC4162L_VCHARGE_DAC, val);
>> + case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE_MAX:
>> + return ltc4162l_get_vcharge(info,
>> + LTC4162L_VCHARGE_SETTING, val);
>> + case POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT:
>> + return ltc4162l_get_iin_limit_dac(info, val);
>> + case POWER_SUPPLY_PROP_TEMP:
>> + return ltc4162l_get_die_temp(info, val);
>> + case POWER_SUPPLY_PROP_CHARGE_TERM_CURRENT:
>> + return ltc4162l_get_term_current(info, val);
>> + default:
>> + return -EINVAL;
>> + }
>> +}
>> +
>> +static int ltc4162l_set_property(struct power_supply *psy,
>> + enum power_supply_property psp,
>> + const union power_supply_propval *val)
>> +{
>> + struct ltc4162l_info *info = power_supply_get_drvdata(psy);
>> +
>> + switch (psp) {
>> + case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX:
>> + return ltc4162l_set_icharge(info,
>> + LTC4162L_CHARGE_CURRENT_SETTING, val->intval);
>> + case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE_MAX:
>> + return ltc4162l_set_vcharge(info,
>> + LTC4162L_VCHARGE_SETTING, val->intval);
>> + case POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT:
>> + return ltc4162l_set_iin_limit(info, val->intval);
>> + case POWER_SUPPLY_PROP_CHARGE_TERM_CURRENT:
>> + return ltc4162l_set_term_current(info, val->intval);
>> + default:
>> + return -EINVAL;
>> + }
>> +}
>> +
>> +static int ltc4162l_property_is_writeable(struct power_supply *psy,
>> + enum power_supply_property psp)
>> +{
>> + switch (psp) {
>> + case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX:
>> + case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE_MAX:
>> + case POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT:
>> + case POWER_SUPPLY_PROP_CHARGE_TERM_CURRENT:
>> + return 1;
>> + default:
>> + return 0;
>> + }
>> +}
>> +
>> +/* Charger power supply property routines */
>> +static enum power_supply_property ltc4162l_properties[] = {
>> + POWER_SUPPLY_PROP_STATUS,
>> + POWER_SUPPLY_PROP_CHARGE_TYPE,
>> + POWER_SUPPLY_PROP_HEALTH,
>> + POWER_SUPPLY_PROP_ONLINE,
>> + POWER_SUPPLY_PROP_VOLTAGE_NOW, /* Reports battery voltage */
>> + POWER_SUPPLY_PROP_VOLTAGE_AVG,
>> + POWER_SUPPLY_PROP_CURRENT_NOW, /* Reports battery current */
> above 3 properties should describe input voltage/current for chargers,
> see Documentation/ABI/testing/sysfs-class-power
>
> Battery IBAT and VBAT can currently only be reported from
> POWER_SUPPLY_TYPE_BATTERY.

So what should I do? Change the reported type to battery? Or make ibat
ad vbat into custom properties and report input current/voltage here
instead?

>
>> + POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT,
>> + POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX,
>> + POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE,
>> + POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE_MAX,
>> + POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT,
>> + POWER_SUPPLY_PROP_TEMP,
>> + POWER_SUPPLY_PROP_CHARGE_TERM_CURRENT,
>> +};
>> +
>> +static const struct power_supply_desc ltc4162l_desc = {
>> + .name = "ltc4162-l",
>> + .type = POWER_SUPPLY_TYPE_MAINS,
>> + .properties = ltc4162l_properties,
>> + .num_properties = ARRAY_SIZE(ltc4162l_properties),
>> + .get_property = ltc4162l_get_property,
>> + .set_property = ltc4162l_set_property,
>> + .property_is_writeable = ltc4162l_property_is_writeable,
>> +};
>> +
>> +static bool ltc4162l_is_writeable_reg(struct device *dev, unsigned int reg)
>> +{
>> + /* all registers up to this one are writeable */
>> + if (reg <= LTC4162L_CHARGER_CONFIG_BITS)
>> + return true;
>> +
>> + /* The ALERTS registers can be written to clear alerts */
>> + if (reg >= LTC4162L_LIMIT_ALERTS_REG &&
>> + reg <= LTC4162L_CHARGE_STATUS_ALERTS_REG)
>> + return true;
>> +
>> + return false;
>> +}
>> +
>> +static bool ltc4162l_is_volatile_reg(struct device *dev, unsigned int reg)
>> +{
>> + /* all registers after this one are read-only status registers */
>> + return reg > LTC4162L_CHARGER_CONFIG_BITS;
>> +}
>> +
>> +static const struct regmap_config ltc4162l_regmap_config = {
>> + .reg_bits = 8,
>> + .val_bits = 16,
>> + .val_format_endian = REGMAP_ENDIAN_LITTLE,
>> + .writeable_reg = ltc4162l_is_writeable_reg,
>> + .volatile_reg = ltc4162l_is_volatile_reg,
>> + .max_register = LTC4162L_INPUT_UNDERVOLTAGE_DAC,
>> + .cache_type = REGCACHE_RBTREE,
>> +};
>> +
>> +static void ltc4162l_clear_interrupts(struct ltc4162l_info *info)
>> +{
>> + /* Acknowledge interrupt to chip by clearing all events */
>> + regmap_write(info->regmap, LTC4162L_LIMIT_ALERTS_REG, 0);
>> + regmap_write(info->regmap, LTC4162L_CHARGER_STATE_ALERTS_REG, 0);
>> + regmap_write(info->regmap, LTC4162L_CHARGE_STATUS_ALERTS_REG, 0);
>> +}
>> +
>> +static int ltc4162l_probe(struct i2c_client *client,
>> + const struct i2c_device_id *id)
>> +{
>> + struct i2c_adapter *adapter = client->adapter;
>> + struct device *dev = &client->dev;
>> + struct ltc4162l_info *info;
>> + struct power_supply_config ltc4162l_config = {};
>> + u32 value;
>> + int ret;
>> +
>> + if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_WORD_DATA)) {
>> + dev_err(dev, "No support for SMBUS_WORD_DATA\n");
>> + return -ENODEV;
>> + }
>> + info = devm_kzalloc(dev, sizeof(*info), GFP_KERNEL);
>> + if (!info)
>> + return -ENOMEM;
>> +
>> + info->client = client;
>> + i2c_set_clientdata(client, info);
>> +
>> + info->regmap = devm_regmap_init_i2c(client, &ltc4162l_regmap_config);
>> + if (IS_ERR(info->regmap)) {
>> + dev_err(dev, "Failed to initialize register map\n");
>> + return PTR_ERR(info->regmap);
>> + }
>> +
>> + ret = device_property_read_u32(dev, "lltc,rsnsb-micro-ohms",
>> + &info->rsnsb);
>> + if (ret) {
>> + dev_err(dev, "Missing lltc,rsnsb-micro-ohms property\n");
>> + return ret;
>> + }
>> + if (!info->rsnsb)
>> + return -EINVAL;
>> +
>> + ret = device_property_read_u32(dev, "lltc,rsnsi-micro-ohms",
>> + &info->rsnsi);
>> + if (ret) {
>> + dev_err(dev, "Missing lltc,rsnsi-micro-ohms property\n");
>> + return ret;
>> + }
>> + if (!info->rsnsi)
>> + return -EINVAL;
>> +
>> + if (!device_property_read_u32(dev, "lltc,cell-count", &value))
>> + info->cell_count = value;
>> +
>> + ltc4162l_config.of_node = dev->of_node;
>> + ltc4162l_config.drv_data = info;
>> +
>> + info->charger = devm_power_supply_register(dev, &ltc4162l_desc,
>> + &ltc4162l_config);
>> + if (IS_ERR(info->charger)) {
>> + dev_err(dev, "Failed to register charger\n");
>> + return PTR_ERR(info->charger);
>> + }
>> +
>> + ret = sysfs_create_group(&info->charger->dev.kobj,
>> + &ltc4162l_attr_group);
>> + if (ret)
>> + dev_err(dev, "failed to create extra sysfs entries\n");
> please use '.attr_grp' in ltc4162l_config, which means the
> attributes are registered together with the power-supply
> device avoiding a udev race condition. The change also
> simplifies the driver code, since (de)registration happens
> automatically :)

Good tip, missed that.


>
>> + /* Disable the threshold alerts, we're not using them */
>> + regmap_write(info->regmap, LTC4162L_EN_LIMIT_ALERTS_REG, 0);
>> +
>> + /* Enable interrupts on all status changes */
>> + regmap_write(info->regmap, LTC4162L_EN_CHARGER_STATE_ALERTS_REG,
>> + 0x1fff);
>> + regmap_write(info->regmap, LTC4162L_EN_CHARGE_STATUS_ALERTS_REG, 0x1f);
>> +
>> + ltc4162l_clear_interrupts(info);
>> +
>> + return 0;
>> +}
>> +
>> +static int ltc4162l_remove(struct i2c_client *client)
>> +{
>> + struct ltc4162l_info *info = i2c_get_clientdata(client);
>> +
>> + sysfs_remove_group(&info->charger->dev.kobj, &ltc4162l_attr_group);
>> +
>> + return 0;
>> +}
>> +
>> +static void ltc4162l_alert(struct i2c_client *client,
>> + enum i2c_alert_protocol type, unsigned int flag)
>> +{
>> + struct ltc4162l_info *info = i2c_get_clientdata(client);
>> +
>> + if (type != I2C_PROTOCOL_SMBUS_ALERT)
>> + return;
>> +
>> + ltc4162l_clear_interrupts(info);
>> + power_supply_changed(info->charger);
>> +}
>> +
>> +static const struct i2c_device_id ltc4162l_i2c_id_table[] = {
>> + { "ltc4162-l", 0 },
>> + { },
>> +};
>> +MODULE_DEVICE_TABLE(i2c, ltc4162l_i2c_id_table);
>> +
>> +static const struct of_device_id ltc4162l_of_match[] = {
>> + { .compatible = "lltc,ltc4162-l", },
>> + { },
>> +};
>> +MODULE_DEVICE_TABLE(of, ltc4162l_of_match);
>> +
>> +static struct i2c_driver ltc4162l_driver = {
>> + .probe = ltc4162l_probe,
>> + .remove = ltc4162l_remove,
>> + .alert = ltc4162l_alert,
>> + .id_table = ltc4162l_i2c_id_table,
>> + .driver = {
>> + .name = "ltc4162-l-charger",
>> + .of_match_table = of_match_ptr(ltc4162l_of_match),
>> + },
>> +};
>> +module_i2c_driver(ltc4162l_driver);
>> +
>> +MODULE_LICENSE("GPL");
>> +MODULE_AUTHOR("Mike Looijmans <mike.looijmans@topic.nl>");
>> +MODULE_DESCRIPTION("LTC4162-L charger driver");
> Otherwise LGTM. Please send bindings and driver as a series next
> time :)
>
> Thanks,
>
> -- Sebastian


--
Mike Looijmans

\
 
 \ /
  Last update: 2021-01-04 11:42    [W:0.092 / U:2.792 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site