lkml.org 
[lkml]   [2021]   [Jan]   [31]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Date
SubjectRe: [PATCH v5] gpiolib: Bind gpio_device to a driver to enable fw_devlink=on by default
On Sat, Jan 30, 2021 at 9:39 AM Dmitry Osipenko <digetx@gmail.com> wrote:
>
> 22.01.2021 22:35, Saravana Kannan пишет:
> > There are multiple instances of GPIO device tree nodes of the form:
> >
> > foo {
> > compatible = "acme,foo";
> > ...
> >
> > gpio0: gpio0@xxxxxxxx {
> > compatible = "acme,bar";
> > ...
> > gpio-controller;
> > };
> >
> > gpio1: gpio1@xxxxxxxx {
> > compatible = "acme,bar";
> > ...
> > gpio-controller;
> > };
> >
> > ...
> > }
> >
> > bazz {
> > my-gpios = <&gpio0 ...>;
> > }
> >
> > Case 1: The driver for "foo" populates struct device for these gpio*
> > nodes and then probes them using a driver that binds with "acme,bar".
> > This driver for "acme,bar" then registers the gpio* nodes with gpiolib.
> > This lines up with how DT nodes with the "compatible" property are
> > typically converted to struct devices and then registered with driver
> > core to probe them. This also allows the gpio* devices to hook into all
> > the driver core capabilities like runtime PM, probe deferral,
> > suspend/resume ordering, device links, etc.
> >
> > Case 2: The driver for "foo" doesn't populate struct devices for these
> > gpio* nodes before registering them with gpiolib. Instead it just loops
> > through its child nodes and directly registers the gpio* nodes with
> > gpiolib.
> >
> > Drivers that follow case 2 cause problems with fw_devlink=on. This is
> > because fw_devlink will prevent bazz from probing until there's a struct
> > device that has gpio0 as its fwnode (because bazz lists gpio0 as a GPIO
> > supplier). Once the struct device is available, fw_devlink will create a
> > device link with gpio0 device as the supplier and bazz device as the
> > consumer. After this point, since the gpio0 device will never bind to a
> > driver, the device link will prevent bazz device from ever probing.
> >
> > Finding and refactoring all the instances of drivers that follow case 2
> > will cause a lot of code churn and it is not something that can be done
> > in one shot. In some instances it might not even be possible to refactor
> > them cleanly. Examples of such instances are [1] [2].
> >
> > This patch works around this problem and avoids all the code churn by
> > simply setting the fwnode of the gpio_device and creating a stub driver
> > to bind to the gpio_device. This allows all the consumers to continue
> > probing when the driver follows case 2.
> >
> > [1] - https://lore.kernel.org/lkml/20201014191235.7f71fcb4@xhacker.debian/
> > [2] - https://lore.kernel.org/lkml/e28e1f38d87c12a3c714a6573beba6e1@kernel.org/
> > Cc: Marc Zyngier <maz@kernel.org>
> > Cc: Jisheng Zhang <Jisheng.Zhang@synaptics.com>
> > Cc: Kever Yang <kever.yang@rock-chips.com>
> > Fixes: e590474768f1 ("driver core: Set fw_devlink=on by default")
> > Signed-off-by: Saravana Kannan <saravanak@google.com>
> > ---
> > v1 -> v2:
> > - Fixed up compilation errors that were introduced accidentally
> > - Fixed a missing put_device()
> >
> > v2 -> v3:
> > - Changed chip_warn() to pr_warn()
> > - Changed some variable names
> >
> > v3 -> v4:
> > - Dropped the warning since it's not always valid
> > - This simplifies the code a lot
> > - Added comments and fixed up commit text
> >
> > v4 -> v5:
> > - Fixed the code to not mess up non-DT cases.
> > - Moved code into gpiolib-of.c
> >
> > drivers/gpio/gpiolib-of.c | 11 +++++++++++
> > drivers/gpio/gpiolib-of.h | 5 +++++
> > drivers/gpio/gpiolib.c | 38 +++++++++++++++++++++++++++++++-------
> > 3 files changed, 47 insertions(+), 7 deletions(-)
> >
> > diff --git a/drivers/gpio/gpiolib-of.c b/drivers/gpio/gpiolib-of.c
> > index b4a71119a4b0..baf0153b7bca 100644
> > --- a/drivers/gpio/gpiolib-of.c
> > +++ b/drivers/gpio/gpiolib-of.c
> > @@ -1039,3 +1039,14 @@ void of_gpiochip_remove(struct gpio_chip *chip)
> > {
> > of_node_put(chip->of_node);
> > }
> > +
> > +void of_gpio_dev_init(struct gpio_chip *gc, struct gpio_device *gdev)
> > +{
> > + /* If the gpiochip has an assigned OF node this takes precedence */
> > + if (gc->of_node)
> > + gdev->dev.of_node = gc->of_node;
> > + else
> > + gc->of_node = gdev->dev.of_node;
> > + if (gdev->dev.of_node)
> > + gdev->dev.fwnode = of_fwnode_handle(gdev->dev.of_node);
> > +}
> > diff --git a/drivers/gpio/gpiolib-of.h b/drivers/gpio/gpiolib-of.h
> > index ed26664f1537..8af2bc899aab 100644
> > --- a/drivers/gpio/gpiolib-of.h
> > +++ b/drivers/gpio/gpiolib-of.h
> > @@ -15,6 +15,7 @@ int of_gpiochip_add(struct gpio_chip *gc);
> > void of_gpiochip_remove(struct gpio_chip *gc);
> > int of_gpio_get_count(struct device *dev, const char *con_id);
> > bool of_gpio_need_valid_mask(const struct gpio_chip *gc);
> > +void of_gpio_dev_init(struct gpio_chip *gc, struct gpio_device *gdev);
> > #else
> > static inline struct gpio_desc *of_find_gpio(struct device *dev,
> > const char *con_id,
> > @@ -33,6 +34,10 @@ static inline bool of_gpio_need_valid_mask(const struct gpio_chip *gc)
> > {
> > return false;
> > }
> > +static inline void of_gpio_dev_init(struct gpio_chip *gc,
> > + struct gpio_device *gdev)
> > +{
> > +}
> > #endif /* CONFIG_OF_GPIO */
> >
> > extern struct notifier_block gpio_of_notifier;
> > diff --git a/drivers/gpio/gpiolib.c b/drivers/gpio/gpiolib.c
> > index b02cc2abd3b6..70fb15ae5d36 100644
> > --- a/drivers/gpio/gpiolib.c
> > +++ b/drivers/gpio/gpiolib.c
> > @@ -590,13 +590,7 @@ int gpiochip_add_data_with_key(struct gpio_chip *gc, void *data,
> > gdev->dev.of_node = gc->parent->of_node;
> > }
> >
> > -#ifdef CONFIG_OF_GPIO
> > - /* If the gpiochip has an assigned OF node this takes precedence */
> > - if (gc->of_node)
> > - gdev->dev.of_node = gc->of_node;
> > - else
> > - gc->of_node = gdev->dev.of_node;
> > -#endif
> > + of_gpio_dev_init(gc, gdev);
> >
> > gdev->id = ida_alloc(&gpio_ida, GFP_KERNEL);
> > if (gdev->id < 0) {
> > @@ -4202,6 +4196,29 @@ void gpiod_put_array(struct gpio_descs *descs)
> > }
> > EXPORT_SYMBOL_GPL(gpiod_put_array);
> >
> > +static int gpio_stub_drv_probe(struct device *dev)
> > +{
> > + /*
> > + * The DT node of some GPIO chips have a "compatible" property, but
> > + * never have a struct device added and probed by a driver to register
> > + * the GPIO chip with gpiolib. In such cases, fw_devlink=on will cause
> > + * the consumers of the GPIO chip to get probe deferred forever because
> > + * they will be waiting for a device associated with the GPIO chip
> > + * firmware node to get added and bound to a driver.
> > + *
> > + * To allow these consumers to probe, we associate the struct
> > + * gpio_device of the GPIO chip with the firmware node and then simply
> > + * bind it to this stub driver.
> > + */
> > + return 0;
> > +}
> > +
> > +static struct device_driver gpio_stub_drv = {
> > + .name = "gpio_stub_drv",
> > + .bus = &gpio_bus_type,
> > + .probe = gpio_stub_drv_probe,
> > +};
> > +
> > static int __init gpiolib_dev_init(void)
> > {
> > int ret;
> > @@ -4213,9 +4230,16 @@ static int __init gpiolib_dev_init(void)
> > return ret;
> > }
> >
> > + if (driver_register(&gpio_stub_drv) < 0) {
> > + pr_err("gpiolib: could not register GPIO stub driver\n");
> > + bus_unregister(&gpio_bus_type);
> > + return ret;
> > + }
> > +
> > ret = alloc_chrdev_region(&gpio_devt, 0, GPIO_DEV_MAX, GPIOCHIP_NAME);
> > if (ret < 0) {
> > pr_err("gpiolib: failed to allocate char dev region\n");
> > + driver_unregister(&gpio_stub_drv);
> > bus_unregister(&gpio_bus_type);
> > return ret;
> > }
> >
>
> Hi,
>
> This patch causes these new errors on NVIDIA Tegra30 Nexus 7 using recent linux-next:
>
> gpio-1022 (cpu-pwr-req-hog): hogged as input
> max77620-pinctrl max77620-pinctrl: pin gpio4 already requested by max77620-pinctrl; cannot claim for gpiochip1
> max77620-pinctrl max77620-pinctrl: pin-4 (gpiochip1) status -22
> max77620-pinctrl max77620-pinctrl: could not request pin 4 (gpio4) from group gpio4 on device max77620-pinctrl
> gpio_stub_drv gpiochip1: Error applying setting, reverse things back
> gpio_stub_drv: probe of gpiochip1 failed with error -22
>
> Please fix, thanks in advance.

I have a partial guess on why this is happening. So can you try this patch?

Thanks,
Saravana

--- a/drivers/gpio/gpiolib.c
+++ b/drivers/gpio/gpiolib.c
@@ -4213,6 +4213,8 @@ static int gpio_stub_drv_probe(struct device *dev)
* gpio_device of the GPIO chip with the firmware node and then simply
* bind it to this stub driver.
*/
+ if (dev->fwnode && dev->fwnode->dev != dev)
+ return -EBUSY;
return 0;
}
\
 
 \ /
  Last update: 2021-01-31 22:31    [W:0.129 / U:0.888 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site