lkml.org 
[lkml]   [2021]   [Jan]   [31]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v4] iio: adc: stm32-adc: enable timestamping for non-DMA usage
On Mon, 25 Jan 2021 20:48:23 +0100
Ahmad Fatoum <a.fatoum@pengutronix.de> wrote:

> For non-DMA usage, we have an easy way to associate a timestamp with a
> sample: iio_pollfunc_store_time stores a timestamp in the primary
> trigger IRQ handler and stm32_adc_trigger_handler runs in the IRQ thread
> to push out the buffer along with the timestamp.
>
> For this to work, the driver needs to register an IIO_TIMESTAMP channel.
> Do this.
>
> For DMA, it's not as easy, because we don't push the buffers out of
> stm32_adc_trigger, but out of stm32_adc_dma_buffer_done, which runs in
> a tasklet scheduled after a DMA completion.
>
> Preferably, the DMA controller would copy us the timestamp into that buffer
> as well. Until this is implemented, restrict timestamping support to
> only PIO. For low-frequency sampling, PIO is probably good enough.
>
> Cc: Holger Assmann <has@pengutronix.de>
> Acked-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
> Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>

Applied to the togreg branch of iio.git and pushed out as testing for
the autobuilders to poke at it and see if they can find any issues
that we missed.

Thanks,

Jonathan

> ---
> v3 -> v4:
> - descrease buffer size to correct size (Marc)
> v2 -> v3:
> - explicitly specify alignment (Jonathan)
> - increase buffer size to hold additional timestamp
> v1 -> v2:
> - Added comment about timestamping being PIO only (Fabrice)
> - Added missing DMA resource clean up in error path (Fabrice)
> - Added Fabrice's Acked-by
> ---
> drivers/iio/adc/stm32-adc.c | 39 +++++++++++++++++++++++++++++--------
> 1 file changed, 31 insertions(+), 8 deletions(-)
>
> diff --git a/drivers/iio/adc/stm32-adc.c b/drivers/iio/adc/stm32-adc.c
> index c067c994dae2..5ebbd28e45ca 100644
> --- a/drivers/iio/adc/stm32-adc.c
> +++ b/drivers/iio/adc/stm32-adc.c
> @@ -177,7 +177,7 @@ struct stm32_adc_cfg {
> * @offset: ADC instance register offset in ADC block
> * @cfg: compatible configuration data
> * @completion: end of single conversion completion
> - * @buffer: data buffer
> + * @buffer: data buffer + 8 bytes for timestamp if enabled
> * @clk: clock for this adc instance
> * @irq: interrupt for this adc instance
> * @lock: spinlock
> @@ -200,7 +200,7 @@ struct stm32_adc {
> u32 offset;
> const struct stm32_adc_cfg *cfg;
> struct completion completion;
> - u16 buffer[STM32_ADC_MAX_SQ];
> + u16 buffer[STM32_ADC_MAX_SQ + 4] __aligned(8);
> struct clk *clk;
> int irq;
> spinlock_t lock; /* interrupt lock */
> @@ -1718,7 +1718,7 @@ static void stm32_adc_chan_init_one(struct iio_dev *indio_dev,
> }
> }
>
> -static int stm32_adc_chan_of_init(struct iio_dev *indio_dev)
> +static int stm32_adc_chan_of_init(struct iio_dev *indio_dev, bool timestamping)
> {
> struct device_node *node = indio_dev->dev.of_node;
> struct stm32_adc *adc = iio_priv(indio_dev);
> @@ -1766,6 +1766,9 @@ static int stm32_adc_chan_of_init(struct iio_dev *indio_dev)
> return -EINVAL;
> }
>
> + if (timestamping)
> + num_channels++;
> +
> channels = devm_kcalloc(&indio_dev->dev, num_channels,
> sizeof(struct iio_chan_spec), GFP_KERNEL);
> if (!channels)
> @@ -1816,6 +1819,19 @@ static int stm32_adc_chan_of_init(struct iio_dev *indio_dev)
> stm32_adc_smpr_init(adc, channels[i].channel, smp);
> }
>
> + if (timestamping) {
> + struct iio_chan_spec *timestamp = &channels[scan_index];
> +
> + timestamp->type = IIO_TIMESTAMP;
> + timestamp->channel = -1;
> + timestamp->scan_index = scan_index;
> + timestamp->scan_type.sign = 's';
> + timestamp->scan_type.realbits = 64;
> + timestamp->scan_type.storagebits = 64;
> +
> + scan_index++;
> + }
> +
> indio_dev->num_channels = scan_index;
> indio_dev->channels = channels;
>
> @@ -1875,6 +1891,7 @@ static int stm32_adc_probe(struct platform_device *pdev)
> struct device *dev = &pdev->dev;
> irqreturn_t (*handler)(int irq, void *p) = NULL;
> struct stm32_adc *adc;
> + bool timestamping = false;
> int ret;
>
> if (!pdev->dev.of_node)
> @@ -1931,16 +1948,22 @@ static int stm32_adc_probe(struct platform_device *pdev)
> if (ret < 0)
> return ret;
>
> - ret = stm32_adc_chan_of_init(indio_dev);
> - if (ret < 0)
> - return ret;
> -
> ret = stm32_adc_dma_request(dev, indio_dev);
> if (ret < 0)
> return ret;
>
> - if (!adc->dma_chan)
> + if (!adc->dma_chan) {
> + /* For PIO mode only, iio_pollfunc_store_time stores a timestamp
> + * in the primary trigger IRQ handler and stm32_adc_trigger_handler
> + * runs in the IRQ thread to push out buffer along with timestamp.
> + */
> handler = &stm32_adc_trigger_handler;
> + timestamping = true;
> + }
> +
> + ret = stm32_adc_chan_of_init(indio_dev, timestamping);
> + if (ret < 0)
> + goto err_dma_disable;
>
> ret = iio_triggered_buffer_setup(indio_dev,
> &iio_pollfunc_store_time, handler,

\
 
 \ /
  Last update: 2021-01-31 16:29    [W:0.036 / U:4.872 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site