lkml.org 
[lkml]   [2021]   [Jan]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] clk: qcom: smd-rpm: Add mdm9607 clocks
Date
Add support for RPM-managed clocks on the MDM9607 platform.

Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
---
.../devicetree/bindings/clock/qcom,rpmcc.txt | 1 +
drivers/clk/qcom/clk-smd-rpm.c | 32 +++++++++++++++++++
2 files changed, 33 insertions(+)

diff --git a/Documentation/devicetree/bindings/clock/qcom,rpmcc.txt b/Documentation/devicetree/bindings/clock/qcom,rpmcc.txt
index b44a0622fb3a..5ac207d4b8ab 100644
--- a/Documentation/devicetree/bindings/clock/qcom,rpmcc.txt
+++ b/Documentation/devicetree/bindings/clock/qcom,rpmcc.txt
@@ -10,6 +10,7 @@ Required properties :
- compatible : shall contain only one of the following. The generic
compatible "qcom,rpmcc" should be also included.

+ "qcom,rpmcc-mdm9607", "qcom,rpmcc"
"qcom,rpmcc-msm8660", "qcom,rpmcc"
"qcom,rpmcc-apq8060", "qcom,rpmcc"
"qcom,rpmcc-msm8916", "qcom,rpmcc"
diff --git a/drivers/clk/qcom/clk-smd-rpm.c b/drivers/clk/qcom/clk-smd-rpm.c
index 0e1dfa89489e..ceea50bae8f8 100644
--- a/drivers/clk/qcom/clk-smd-rpm.c
+++ b/drivers/clk/qcom/clk-smd-rpm.c
@@ -406,6 +406,37 @@ static const struct clk_ops clk_smd_rpm_branch_ops = {
.unprepare = clk_smd_rpm_unprepare,
};

+/* mdm9607 */
+DEFINE_CLK_SMD_RPM_BRANCH(mdm9607, xo_clk_src, xo_a_clk_src, QCOM_SMD_RPM_MISC_CLK, 0,
+ 19200000);
+DEFINE_CLK_SMD_RPM(mdm9607, pcnoc_clk, pcnoc_a_clk, QCOM_SMD_RPM_BUS_CLK, 0);
+DEFINE_CLK_SMD_RPM(mdm9607, bimc_clk, bimc_a_clk, QCOM_SMD_RPM_MEM_CLK, 0);
+DEFINE_CLK_SMD_RPM(mdm9607, qpic_clk, qpic_a_clk, QCOM_SMD_RPM_QPIC_CLK, 0);
+DEFINE_CLK_SMD_RPM_QDSS(mdm9607, qdss_clk, qdss_a_clk, QCOM_SMD_RPM_MISC_CLK, 1);
+DEFINE_CLK_SMD_RPM_XO_BUFFER(mdm9607, bb_clk1, bb_clk1_a, 1);
+DEFINE_CLK_SMD_RPM_XO_BUFFER_PINCTRL(mdm9607, bb_clk1_pin, bb_clk1_a_pin, 1);
+static struct clk_smd_rpm *mdm9607_clks[] = {
+ [RPM_SMD_XO_CLK_SRC] = &mdm9607_xo_clk_src,
+ [RPM_SMD_XO_A_CLK_SRC] = &mdm9607_xo_a_clk_src,
+ [RPM_SMD_PCNOC_CLK] = &mdm9607_pcnoc_clk,
+ [RPM_SMD_PCNOC_A_CLK] = &mdm9607_pcnoc_a_clk,
+ [RPM_SMD_BIMC_CLK] = &mdm9607_bimc_clk,
+ [RPM_SMD_BIMC_A_CLK] = &mdm9607_bimc_a_clk,
+ [RPM_SMD_QPIC_CLK] = &mdm9607_qpic_clk,
+ [RPM_SMD_QPIC_CLK_A] = &mdm9607_qpic_a_clk,
+ [RPM_SMD_QDSS_CLK] = &mdm9607_qdss_clk,
+ [RPM_SMD_QDSS_A_CLK] = &mdm9607_qdss_a_clk,
+ [RPM_SMD_BB_CLK1] = &mdm9607_bb_clk1,
+ [RPM_SMD_BB_CLK1_A] = &mdm9607_bb_clk1_a,
+ [RPM_SMD_BB_CLK1_PIN] = &mdm9607_bb_clk1_pin,
+ [RPM_SMD_BB_CLK1_A_PIN] = &mdm9607_bb_clk1_a_pin,
+};
+
+static const struct rpm_smd_clk_desc rpm_clk_mdm9607 = {
+ .clks = mdm9607_clks,
+ .num_clks = ARRAY_SIZE(mdm9607_clks),
+};
+
/* msm8916 */
DEFINE_CLK_SMD_RPM(msm8916, pcnoc_clk, pcnoc_a_clk, QCOM_SMD_RPM_BUS_CLK, 0);
DEFINE_CLK_SMD_RPM(msm8916, snoc_clk, snoc_a_clk, QCOM_SMD_RPM_BUS_CLK, 1);
@@ -1060,6 +1091,7 @@ static const struct rpm_smd_clk_desc rpm_clk_sdm660 = {
};

static const struct of_device_id rpm_smd_clk_match_table[] = {
+ { .compatible = "qcom,rpmcc-mdm9607", .data = &rpm_clk_mdm9607 },
{ .compatible = "qcom,rpmcc-msm8916", .data = &rpm_clk_msm8916 },
{ .compatible = "qcom,rpmcc-msm8936", .data = &rpm_clk_msm8936 },
{ .compatible = "qcom,rpmcc-msm8974", .data = &rpm_clk_msm8974 },
--
2.30.0
\
 
 \ /
  Last update: 2021-01-31 02:32    [W:0.040 / U:3.140 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site