lkml.org 
[lkml]   [2021]   [Jan]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v4 02/13] extcon: arizona: Fix some issues when HPDET IRQ fires after the jack has been unplugged
On Sat, Jan 23, 2021 at 01:13:02PM +0100, Hans de Goede wrote:
> When the jack is partially inserted and then removed again it may be
> removed while the hpdet code is running. In this case the following
> may happen:
>
> 1. The "JACKDET rise" or ""JACKDET fall" IRQ triggers
> 2. arizona_jackdet runs and takes info->lock
> 3. The "HPDET" IRQ triggers
> 4. arizona_hpdet_irq runs, blocks on info->lock
> 5. arizona_jackdet calls arizona_stop_mic() and clears info->hpdet_done
> 6. arizona_jackdet releases info->lock
> 7. arizona_hpdet_irq now can continue running and:
> 7.1 Calls arizona_start_mic() (if a mic was detected)
> 7.2 sets info->hpdet_done
>
> Step 7 is undesirable / a bug:
> 7.1 causes the device to stay in a high power-state (with MICVDD enabled)
> 7.2 causes hpdet to not run on the next jack insertion, which in turn
> causes the EXTCON_JACK_HEADPHONE state to never get set
>
> This fixes both issues by skipping these 2 steps when arizona_hpdet_irq
> runs after the jack has been unplugged.
>
> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
> Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
> ---

Tested-by: Charles Keepax <ckeepax@opensource.cirrus.com>

Thanks,
Charles

\
 
 \ /
  Last update: 2021-01-30 17:06    [W:0.149 / U:3.432 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site