lkml.org 
[lkml]   [2021]   [Jan]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2] iio: hid-sensor-prox: Fix scale not correct issue
Date
Currently, the proxy sensor scale is zero because it just return the
exponent directly. To fix this issue, this patch use
hid_sensor_format_scale to process the scale first then return the
output.

Fixes: 39a3a0138f61 ("iio: hid-sensors: Added Proximity Sensor Driver")
Signed-off-by: Ye Xiang <xiang.ye@intel.com>
---
v2:
- Add Fixes tag

---
drivers/iio/light/hid-sensor-prox.c | 13 +++++++++++--
1 file changed, 11 insertions(+), 2 deletions(-)

diff --git a/drivers/iio/light/hid-sensor-prox.c b/drivers/iio/light/hid-sensor-prox.c
index 4ab285a418d5..4abcfe48f1d4 100644
--- a/drivers/iio/light/hid-sensor-prox.c
+++ b/drivers/iio/light/hid-sensor-prox.c
@@ -23,6 +23,9 @@ struct prox_state {
struct hid_sensor_common common_attributes;
struct hid_sensor_hub_attribute_info prox_attr;
u32 human_presence;
+ int scale_pre_decml;
+ int scale_post_decml;
+ int scale_precision;
};

static const u32 prox_sensitivity_addresses[] = {
@@ -98,8 +101,9 @@ static int prox_read_raw(struct iio_dev *indio_dev,
ret_type = IIO_VAL_INT;
break;
case IIO_CHAN_INFO_SCALE:
- *val = prox_state->prox_attr.units;
- ret_type = IIO_VAL_INT;
+ *val = prox_state->scale_pre_decml;
+ *val2 = prox_state->scale_post_decml;
+ ret_type = prox_state->scale_precision;
break;
case IIO_CHAN_INFO_OFFSET:
*val = hid_sensor_convert_exponent(
@@ -221,6 +225,11 @@ static int prox_parse_report(struct platform_device *pdev,
dev_dbg(&pdev->dev, "prox %x:%x\n", st->prox_attr.index,
st->prox_attr.report_id);

+ st->scale_precision = hid_sensor_format_scale(
+ hsdev->usage,
+ &st->prox_attr,
+ &st->scale_pre_decml, &st->scale_post_decml);
+
return ret;
}

--
2.17.1
\
 
 \ /
  Last update: 2021-01-30 11:26    [W:0.035 / U:0.768 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site