lkml.org 
[lkml]   [2021]   [Jan]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [RFC V2] block: reject I/O for same fd if block size changed
Date
On 12/30/20 08:03, Minwoo Im wrote:
> Let's say, for example of NVMe device, Format command to change out
> LBA format to another logical block size and BLKRRPART to re-read
> partition information with a same file descriptor like:
>
> fd = open("/dev/nvme0n1", O_RDONLY);
>
> nvme_format(fd, ...);
> if (ioctl(fd, BLKRRPART) < 0)
> ..
>
> In this case, ioctl causes invalid Read operations which are triggered
> by buffer_head I/O path to re-read partition information. This is
> because it's still playing around with i_blksize and i_blkbits. So,
> 512 -> 4096 -> 512 logical block size changes will cause an under-flowed
> length of Read operations.
>
> Case for NVMe:
> (LBAF 1 512B, LBAF 0 4K logical block size)
>
> nvme format /dev/nvme0n1 --lbaf=1 --force # to 512B LBA
> nvme format /dev/nvme0n1 --lbaf=0 --force # to 4096B LBA
>
> [dmesg-snip]
> [ 10.771740] blk_update_request: operation not supported error, dev nvme0n1, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
> [ 10.780262] Buffer I/O error on dev nvme0n1, logical block 0, async page read
>
> [event-snip]
> kworker/0:1H-56 [000] .... 913.456922: nvme_setup_cmd: nvme0: disk=nvme0n1, qid=1, cmdid=216, nsid=1, flags=0x0, meta=0x0, cmd=(nvme_cmd_read slba=0, len=65535, ctrl=0x0, dsmgmt=0, reftag=0)
> ksoftirqd/0-9 [000] .Ns. 916.566351: nvme_complete_rq: nvme0: disk=nvme0n1, qid=1, cmdid=216, res=0x0, retries=0, flags=0x0, status=0x4002
>
> As the previous discussion [1], this patch introduced a gendisk flag
> to indicate that block size has been changed in the runtime. This flag
> is set when logical block size is changed in the runtime in the block
> layer. It will be cleared when the file descriptor for the
> block devie is opened again through __blkdev_get() which updates the block
> size via set_init_blocksize().
>
> This patch rejects I/O from the path of add_partitions() to avoid
> issuing invalid Read operations to device. It also sets a flag to
> gendisk in blk_queue_logical_block_size to minimize caller-side updates.
>
> [1] https://lore.kernel.org/linux-nvme/20201223183143.GB13354@localhost.localdomain/T/#t
>
> Signed-off-by: Minwoo Im <minwoo.im.dev@gmail.com>
Rewrite the change-log similar to what we have in the repo and fix
the spelling mistakes. Add a cover-letter to explain the testcase
and the execution effect, also I'd move discussion link into
cover-letter.

\
 
 \ /
  Last update: 2021-01-04 01:59    [W:0.063 / U:2.116 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site