lkml.org 
[lkml]   [2021]   [Jan]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 4/4] arm64: dts: allwinner: h6: Use RSB for AXP805 PMIC connection
Date
On boards where the only peripheral connected to PL0/PL1 is an X-Powers
PMIC, configure the connection to use the RSB bus rather than the I2C
bus. Compared to the I2C controller that shares the pins, the RSB
controller allows a higher bus frequency, and it is more CPU-efficient.

Signed-off-by: Samuel Holland <samuel@sholland.org>
---
.../dts/allwinner/sun50i-h6-beelink-gs1.dts | 38 +++++++++----------
.../dts/allwinner/sun50i-h6-orangepi-3.dts | 14 +++----
.../dts/allwinner/sun50i-h6-orangepi.dtsi | 22 +++++------
3 files changed, 37 insertions(+), 37 deletions(-)

diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-beelink-gs1.dts b/arch/arm64/boot/dts/allwinner/sun50i-h6-beelink-gs1.dts
index 7c9dbde645b5..3452add30cc4 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h6-beelink-gs1.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-beelink-gs1.dts
@@ -150,12 +150,28 @@ &pio {
vcc-pg-supply = <&reg_aldo1>;
};

-&r_i2c {
+&r_ir {
+ linux,rc-map-name = "rc-beelink-gs1";
+ status = "okay";
+};
+
+&r_pio {
+ /*
+ * FIXME: We can't add that supply for now since it would
+ * create a circular dependency between pinctrl, the regulator
+ * and the RSB Bus.
+ *
+ * vcc-pl-supply = <&reg_aldo1>;
+ */
+ vcc-pm-supply = <&reg_aldo1>;
+};
+
+&r_rsb {
status = "okay";

- axp805: pmic@36 {
+ axp805: pmic@745 {
compatible = "x-powers,axp805", "x-powers,axp806";
- reg = <0x36>;
+ reg = <0x745>;
interrupt-parent = <&r_intc>;
interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
interrupt-controller;
@@ -273,22 +289,6 @@ sw {
};
};

-&r_ir {
- linux,rc-map-name = "rc-beelink-gs1";
- status = "okay";
-};
-
-&r_pio {
- /*
- * PL0 and PL1 are used for PMIC I2C
- * don't enable the pl-supply else
- * it will fail at boot
- *
- * vcc-pl-supply = <&reg_aldo1>;
- */
- vcc-pm-supply = <&reg_aldo1>;
-};
-
&rtc {
clocks = <&ext_osc32k>;
};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-3.dts b/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-3.dts
index 15c9dd8c4479..16702293ac0b 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-3.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-3.dts
@@ -175,12 +175,16 @@ &pio {
vcc-pg-supply = <&reg_vcc_wifi_io>;
};

-&r_i2c {
+&r_ir {
+ status = "okay";
+};
+
+&r_rsb {
status = "okay";

- axp805: pmic@36 {
+ axp805: pmic@745 {
compatible = "x-powers,axp805", "x-powers,axp806";
- reg = <0x36>;
+ reg = <0x745>;
interrupt-parent = <&r_intc>;
interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
interrupt-controller;
@@ -291,10 +295,6 @@ sw {
};
};

-&r_ir {
- status = "okay";
-};
-
&rtc {
clocks = <&ext_osc32k>;
};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi.dtsi
index ebc120a9232f..23e3cb2ffd8d 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi.dtsi
@@ -112,12 +112,20 @@ &pio {
vcc-pg-supply = <&reg_aldo1>;
};

-&r_i2c {
+&r_ir {
+ status = "okay";
+};
+
+&r_pio {
+ vcc-pm-supply = <&reg_bldo3>;
+};
+
+&r_rsb {
status = "okay";

- axp805: pmic@36 {
+ axp805: pmic@745 {
compatible = "x-powers,axp805", "x-powers,axp806";
- reg = <0x36>;
+ reg = <0x745>;
interrupt-parent = <&r_intc>;
interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
interrupt-controller;
@@ -232,14 +240,6 @@ sw {
};
};

-&r_ir {
- status = "okay";
-};
-
-&r_pio {
- vcc-pm-supply = <&reg_bldo3>;
-};
-
&rtc {
clocks = <&ext_osc32k>;
};
--
2.26.2
\
 
 \ /
  Last update: 2021-01-03 11:03    [W:0.166 / U:5.696 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site