lkml.org 
[lkml]   [2021]   [Jan]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 2/4] pinctrl: sunxi: h6-r: Add s_rsb pin functions
Date
As there is an RSB controller in the H6 SoC, there should be some pin
configuration for it. While no such configuration is documented, the
"s_i2c" pins are suspiciously on the "alternate" function 3, with no
primary function 2 given. This suggests the primary function for these
pins is actually RSB, and that is indeed the case.

Add the "s_rsb" pin functions so the RSB controller can be used.

Signed-off-by: Samuel Holland <samuel@sholland.org>
---
drivers/pinctrl/sunxi/pinctrl-sun50i-h6-r.c | 2 ++
1 file changed, 2 insertions(+)

diff --git a/drivers/pinctrl/sunxi/pinctrl-sun50i-h6-r.c b/drivers/pinctrl/sunxi/pinctrl-sun50i-h6-r.c
index 4557e18d5989..c7d90c44e87a 100644
--- a/drivers/pinctrl/sunxi/pinctrl-sun50i-h6-r.c
+++ b/drivers/pinctrl/sunxi/pinctrl-sun50i-h6-r.c
@@ -24,11 +24,13 @@ static const struct sunxi_desc_pin sun50i_h6_r_pins[] = {
SUNXI_PIN(SUNXI_PINCTRL_PIN(L, 0),
SUNXI_FUNCTION(0x0, "gpio_in"),
SUNXI_FUNCTION(0x1, "gpio_out"),
+ SUNXI_FUNCTION(0x2, "s_rsb"), /* SCK */
SUNXI_FUNCTION(0x3, "s_i2c"), /* SCK */
SUNXI_FUNCTION_IRQ_BANK(0x6, 0, 0)), /* PL_EINT0 */
SUNXI_PIN(SUNXI_PINCTRL_PIN(L, 1),
SUNXI_FUNCTION(0x0, "gpio_in"),
SUNXI_FUNCTION(0x1, "gpio_out"),
+ SUNXI_FUNCTION(0x2, "s_rsb"), /* SDA */
SUNXI_FUNCTION(0x3, "s_i2c"), /* SDA */
SUNXI_FUNCTION_IRQ_BANK(0x6, 0, 1)), /* PL_EINT1 */
SUNXI_PIN(SUNXI_PINCTRL_PIN(L, 2),
--
2.26.2
\
 
 \ /
  Last update: 2021-01-03 11:03    [W:0.142 / U:0.564 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site