lkml.org 
[lkml]   [2021]   [Jan]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v17 02/10] fs/ntfs3: Add initialization of super block
On Thu, Dec 31, 2020 at 06:23:53PM +0300, Konstantin Komarov wrote:

> diff --git a/fs/ntfs3/fsntfs.c b/fs/ntfs3/fsntfs.c

> +int ntfs_loadlog_and_replay(struct ntfs_inode *ni, struct ntfs_sb_info *sbi)
> +{
> + int err = 0;
> + struct super_block *sb = sbi->sb;
> + struct inode *inode = &ni->vfs_inode;
> + struct MFT_REF ref;
> +
> + /* Check for 4GB */
> + if (inode->i_size >= 0x100000000ull) {
> + ntfs_err(sb, "$LogFile is too big");
> + err = -EINVAL;
> + goto out;
> + }
> +
> + sbi->flags |= NTFS_FLAGS_LOG_REPLAYING;
> +
> + ref.low = cpu_to_le32(MFT_REC_MFT);
> + ref.high = 0;
> + ref.seq = cpu_to_le16(1);
> +
> + inode = ntfs_iget5(sb, &ref, NULL);
> +
> + if (IS_ERR(inode))
> + inode = NULL;
> +
> + if (!inode) {
> + /* Try to use mft copy */
> + u64 t64 = sbi->mft.lbo;
> +
> + sbi->mft.lbo = sbi->mft.lbo2;
> + inode = ntfs_iget5(sb, &ref, NULL);
> + sbi->mft.lbo = t64;
> + if (IS_ERR(inode))
> + inode = NULL;
> + }
> +
> + if (!inode) {
> + err = -EINVAL;
> + ntfs_err(sb, "Failed to load $MFT.");
> + goto out;
> + }
> +
> + sbi->mft.ni = ntfs_i(inode);
> +
> + err = ni_load_all_mi(sbi->mft.ni);
> + if (!err)
> + err = log_replay(ni);

We only get error from log_replay if

> +
> + iput(inode);
> + sbi->mft.ni = NULL;
> +
> + sync_blockdev(sb->s_bdev);
> + invalidate_bdev(sb->s_bdev);
> +
> + /* reinit MFT */
> + if (sbi->flags & NTFS_FLAGS_NEED_REPLAY) {
> + err = 0;
> + goto out;
> + }
> +
> + if (sb_rdonly(sb))
> + goto out;

we get here. Is this a intentional? Probably but I'm just checking.

> diff --git a/fs/ntfs3/inode.c b/fs/ntfs3/inode.c

> +int ntfs_create_inode(struct inode *dir, struct dentry *dentry,
> + const struct cpu_str *uni, umode_t mode, dev_t dev,
> + const char *symname, u32 size, int excl,
> + struct ntfs_fnd *fnd, struct inode **new_inode)
> +{

> +#ifdef CONFIG_NTFS3_FS_POSIX_ACL

In Kconfig this is NTFS3_POSIX_ACL. This repeat every file.

> +int ntfs_unlink_inode(struct inode *dir, const struct dentry *dentry)
> +{
> + int err;
> + struct super_block *sb = dir->i_sb;
> + struct ntfs_sb_info *sbi = sb->s_fs_info;
> + struct inode *inode = d_inode(dentry);
> + struct ntfs_inode *ni = ntfs_i(inode);
> + const struct qstr *name = &dentry->d_name;
> + struct ntfs_inode *dir_ni = ntfs_i(dir);
> + struct ntfs_index *indx = &dir_ni->dir;
> + struct cpu_str *uni = NULL;
> + struct ATTR_FILE_NAME *fname;
> + u8 name_type;
> + struct ATTR_LIST_ENTRY *le;
> + struct MFT_REF ref;
> + bool is_dir = S_ISDIR(inode->i_mode);
> + struct INDEX_ROOT *dir_root;
> +
> + dir_root = indx_get_root(indx, dir_ni, NULL, NULL);
> + if (!dir_root)
> + return -EINVAL;
> +
> + ni_lock(ni);
> +
> + if (is_dir && !dir_is_empty(inode)) {
> + err = -ENOTEMPTY;
> + goto out1;
> + }
> +
> + if (ntfs_is_meta_file(sbi, inode->i_ino)) {
> + err = -EINVAL;
> + goto out1;
> + }
> +
> + /* allocate PATH_MAX bytes */
> + uni = __getname();
> + if (!uni) {
> + err = -ENOMEM;
> + goto out1;
> + }
> +
> + /* Convert input string to unicode */
> + err = ntfs_nls_to_utf16(sbi, name->name, name->len, uni, NTFS_NAME_LEN,
> + UTF16_HOST_ENDIAN);
> + if (err < 0)
> + goto out4;
> +
> + le = NULL;

Little bit random place for this. Do we even need to NULL le.

> +
> + /*mark rw ntfs as dirty. it will be cleared at umount*/
> + ntfs_set_state(sbi, NTFS_DIRTY_DIRTY);
> +
> + /* find name in record */
> +#ifdef NTFS3_64BIT_CLUSTER
> + ref.low = cpu_to_le32(dir->i_ino & 0xffffffff);
> + ref.high = cpu_to_le16(dir->i_ino >> 32);
> +#else
> + ref.low = cpu_to_le32(dir->i_ino & 0xffffffff);
> + ref.high = 0;
> +#endif
> + ref.seq = dir_ni->mi.mrec->seq;
> +
> + fname = ni_fname_name(ni, uni, &ref, &le);

> diff --git a/fs/ntfs3/super.c b/fs/ntfs3/super.c

> +#ifdef CONFIG_PRINTK
> +/*
> + * Trace warnings/notices/errors
> + * Thanks Joe Perches <joe@perches.com> for implementation
> + */
> +void ntfs_printk(const struct super_block *sb, const char *fmt, ...)
> +{
> + struct va_format vaf;
> + va_list args;
> + int level;
> + struct ntfs_sb_info *sbi = sb->s_fs_info;
> +
> + /*should we use different ratelimits for warnings/notices/errors? */
> + if (!___ratelimit(&sbi->msg_ratelimit, "ntfs3"))
> + return;
> +
> + va_start(args, fmt);
> +
> + level = printk_get_level(fmt);
> + vaf.fmt = printk_skip_level(fmt);
> + vaf.va = &args;
> + printk("%c%cntfs3: %s: %pV\n", KERN_SOH_ASCII, level, sb->s_id, &vaf);
> +
> + va_end(args);
> +}
> +
> +static char s_name_buf[512];
> +static atomic_t s_name_buf_cnt = ATOMIC_INIT(1); // 1 means 'free s_name_buf'
> +
> +/* print warnings/notices/errors about inode using name or inode number */
> +void ntfs_inode_printk(struct inode *inode, const char *fmt, ...)
> +{
> + struct super_block *sb = inode->i_sb;
> + struct ntfs_sb_info *sbi = sb->s_fs_info;
> + char *name;
> + va_list args;
> + struct va_format vaf;
> + int level;
> +
> + if (!___ratelimit(&sbi->msg_ratelimit, "ntfs3"))
> + return;
> +
> + if (atomic_dec_and_test(&s_name_buf_cnt)) {
> + /* use static allocated buffer */
> + name = s_name_buf;
> + } else {
> + name = kmalloc(sizeof(s_name_buf), GFP_NOFS);
> + }
> +
> + if (name) {
> + struct dentry *dentry = d_find_alias(inode);
> + const u32 name_len = ARRAY_SIZE(s_name_buf) - 1;
> +
> + if (dentry) {
> + spin_lock(&dentry->d_lock);
> + snprintf(name, name_len, "%s", dentry->d_name.name);
> + spin_unlock(&dentry->d_lock);
> + dput(dentry);
> + name[name_len] = 0; /* to be sure*/
> + } else {
> + name[0] = 0;
> + }
> + }
> +
> + va_start(args, fmt);
> +
> + level = printk_get_level(fmt);
> + vaf.fmt = printk_skip_level(fmt);
> + vaf.va = &args;
> +
> + printk("%c%cntfs3: %s: ino=%lx, \"%s\" %pV\n", KERN_SOH_ASCII, level,
> + sb->s_id, inode->i_ino, name ? name : "", &vaf);
> +
> + va_end(args);
> +
> + atomic_inc(&s_name_buf_cnt);
> + if (name != s_name_buf)
> + kfree(name);
> +}
> +#endif

Should these be in debug.c or something? Atleast I do not see point why
they are in super.c.

> +static int __init init_ntfs_fs(void)
> +{
> + int err;
> +
> +#ifdef NTFS3_INDEX_BINARY_SEARCH
> + pr_notice("ntfs3: +index binary search\n");
> +#endif
> +
> +#ifdef NTFS3_CHECK_FREE_CLST
> + pr_notice("ntfs3: +check free clusters\n");
> +#endif
> +
> +#if NTFS_LINK_MAX < 0xffff
> + pr_notice("ntfs3: max link count %u\n", NTFS_LINK_MAX);
> +#endif
> +
> +#ifdef NTFS3_64BIT_CLUSTER
> + pr_notice("ntfs3: 64 bits per cluster\n");
> +#else
> + pr_notice("ntfs3: 32 bits per cluster\n");
> +#endif
> +#ifdef CONFIG_NTFS3_LZX_XPRESS
> + pr_notice("ntfs3: read-only lzx/xpress compression included\n");
> +#endif
> +
> + ntfs_inode_cachep = kmem_cache_create(
> + "ntfs_inode_cache", sizeof(struct ntfs_inode), 0,
> + (SLAB_RECLAIM_ACCOUNT | SLAB_MEM_SPREAD | SLAB_ACCOUNT),
> + init_once);
> + if (!ntfs_inode_cachep) {
> + err = -ENOMEM;
> + goto failed;
> + }
> +
> + err = register_filesystem(&ntfs_fs_type);
> + if (!err)
> + return 0;

Do we need kmem_cache_destroy() here if err?

> +
> +failed:
> + return err;
> +}

\
 
 \ /
  Last update: 2021-01-03 20:53    [W:0.243 / U:24.980 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site