lkml.org 
[lkml]   [2021]   [Jan]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] regulator: core.c: Replace references to non-existent function
Date
The function regulator_set_device_supply() is referenced a few times in
comments in regulator/core.c; however this function was removed a long
time ago by commit a5766f11cfd3 ("regulator: core - Rework machine API to
remove string based functions."). Update those references to point to
set_consumer_device_supply(), which replaced the old function.

Signed-off-by: Daniel Scally <djrscally@gmail.com>
---
drivers/regulator/core.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c
index ca03d8e70bd1..fee924158091 100644
--- a/drivers/regulator/core.c
+++ b/drivers/regulator/core.c
@@ -2020,7 +2020,7 @@ struct regulator *_regulator_get(struct device *dev, const char *id,
* Returns a struct regulator corresponding to the regulator producer,
* or IS_ERR() condition containing errno.
*
- * Use of supply names configured via regulator_set_device_supply() is
+ * Use of supply names configured via set_consumer_device_supply() is
* strongly encouraged. It is recommended that the supply name used
* should match the name used for the supply and/or the relevant
* device pins in the datasheet.
@@ -2047,7 +2047,7 @@ EXPORT_SYMBOL_GPL(regulator_get);
* regulator off for correct operation of the hardware they are
* controlling.
*
- * Use of supply names configured via regulator_set_device_supply() is
+ * Use of supply names configured via set_consumer_device_supply() is
* strongly encouraged. It is recommended that the supply name used
* should match the name used for the supply and/or the relevant
* device pins in the datasheet.
@@ -2073,7 +2073,7 @@ EXPORT_SYMBOL_GPL(regulator_get_exclusive);
* disrupting the operation of drivers that can handle absent
* supplies.
*
- * Use of supply names configured via regulator_set_device_supply() is
+ * Use of supply names configured via set_consumer_device_supply() is
* strongly encouraged. It is recommended that the supply name used
* should match the name used for the supply and/or the relevant
* device pins in the datasheet.
--
2.25.1
\
 
 \ /
  Last update: 2021-01-03 17:57    [W:0.029 / U:5.828 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site